Performance - Audi TTRS 8S

K&N Cleaning Kit Aerosol 99-5000EU K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.99-5000EU will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition   Can be used on both Foam & Cotton / Pleated  Labeled in English, Spanish, Swedish, Polish and Czech Restores filter to like new condition Removes road grime, engine exhaust and grease from K&N filters The only cleaner designed specifically for K&N cotton filters

Read more less

Racingline R600 Carbon Fibre Intake Lid – Gloss/Matte Finish Transform your engine bay with the addition of a true R600 carbon fibre lid. Confirmed Fitment Suitable for existing R600 Intake part numbers; VWR12G7R600 VWR12G7R601 VWR12G7R600E VWR12G7R601E Not suitable for EA888 Gen.4 Engine Vehicles – e.g. S3 8Y, Mk8 Golf R, Cupra Leon Mk4. Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

We welcome to Awesome's range of products the all new RacingLine Cold-Air Intake System kit for the current Audi RS3 FL and TTRS (DAZA and DWNA engines). It enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains, particularly on tuned cars.  Our giant High-Flow TriFoam™ triple-layer filter unit is at the heart of the intake.  As always for RacingLine intakes, each filter is handmade in the UK - this one has an exceptional surface area increase, being 42.5% larger than the factory filter at 95,717mm2. The new Cold-Air Intake System uses stunning matte 3K twill carbon fibre construction for the front scoop, intake canister and 3.5" (90mm) rear intake pipe for ultra-light weight and impressive thermal insulation to keep IATs down. The full-width front scoop captures cold, dense air via its two large intakes, and uses clever internal ducting to smooth airflow into the filter canister with minimal turbulence. It's not just about performance either; the stunning carbon weave of the intake will enhance your engine bay every time you lift the bonnet!  Welcome to our new Cold-Air Intake System kit for the current Audi RS3 FL and TTRS (DAZA and DWNA engines). It enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains, particularly on tuned cars.   Our giant High-Flow TriFoam™ triple-layer filter unit is at the heart of the intake.  As always for RacingLine intakes, each filter is handmade in the UK - this one has an exceptional surface area increase, being 42.5% larger than the factory filter at 95,717mm2.    The new Cold-Air Intake System uses stunning matte 3K twill carbon fibre construction for the front scoop, intake canister and 3.5" (90mm) rear intake pipe for ultra-light weight and impressive thermal insulation to keep IATs down.   The full-width front scoop captures cold, dense air via its two large intakes, and uses clever internal ducting to smooth airflow into the filter canister with minimal turbulence.    And it's not just about performance; the stunning carbon weave of the intake will enhance your engine bay every time you lift the bonnet! 

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory air box and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High airflow with three layers of foam Lifetime warranty Lasts up to 60,000 miles before cleaning is required depending on driving conditions Works with original manufacturers air box   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing airflow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full air flow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi RS3  2.5 TFSI  2015 > Audi TTRS  2.5 TFSI  2016 > VW Arteon  2.0 TDI  2017 > VW Passat  2.0 TDI  2014 >  

Read more less

FORM FOLLOWS FUNCTION The Revo Carbon Series Air Intake system is a direct replacement kit and includes a beautiful carbon lid designed to increase the flow of air by utilising the enlarged diameter outlet and increased volume. The Revo Panel Filter upgrade replaces the restrictive stock paper filter, and a Revo carbon intake pipe allows air to flow smoothly to the turbo from the airbox, resolving the restrictions found during flow testing of the OEM system to improve your engines response and the power it can create. KEY FEATURES Increases air volume Enlarged airbox outlet Smooths air flow and reduces restriction Direct replacement carbon fibre kit Proven performance benefits KIT CONTENTS Carbon airbox lid Carbon intake pipe Silicone airbox hose Silicone reducer Propanel Filter CARBON AIRBOX LID Manufactured using the highest quality materials, the Revo carbon airbox lid directly replaces the standard plastic part with an increased outlet size of over 13% being fed by specially designed airflow channels. A gloss carbon finish coupled with impressive performance benefits delivers in form and function, looking great in the engine bay yet still performing above and beyond the OEM part. CARBON INTAKE PIPE The newly designed carbon fibre pipe smoothly tapers from the airbox to the turbo, removing the corrugated plastic section of stock pipe and provides the smoothest possible airflow. The 20% size increase and thermal properties of the carbon keep intake temps lower, allowing the 2.5 TFSI engine with Revo ECU performance software to produce more power. PROPANEL FILTER Revo Panel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. AIRBOX SILICONE HOSE No detail has been overlooked when reducing restrictions within the stock airflow system. The stock corrugated plastic hose is replaced with a smooth silicone one, reducing air turbulence. A three-ply construction with the addition of fluorine for added protection, increases strength to prevent collapsing under pressure. Internal steps flush fit against the stock air box and the turbo inlet, creating a smooth transition between components ensuring the smoothest airflow. SILICONE REDUCER To ensure smooth airflow from the carbon intake to the turbo inlet, a tapered 4 ply silicone hose has been designed with includes a full fluoroline inner to protect against oil vapour. The silicone has perfectly matched internal steps to reduce any unwanted turbulence through the transition of parts, the steps are match to the outer diameter of the carbon pipe, and the internal diameter of the turbo inlet.   PERFORMANCE Testing was carried out with consistent conditions on both the OEM intake and the Revo Carbon Series Air Intake System on a 2018 Audi TTRS running Revo Performance ECU Software. While dyno testing for performance gains, VCDS software was used to log airflow with a full AEM logging suit used to monitor temperatures. The Revo Carbon Series Intake increased vehicle performance, especially over 3600rpm with 16whp and 31NM gains, highlighting the performance benefits over the stock components.   AIRFLOW The only way to fully test the maximum airflow and restriction was to test both the stock and Revo intake on a controlled Flow test bed. The testing was carried out using a 76mm orifice plate to simulate the size of the stock turbo inlet. The Carbon Series Revo system had far less restriction than the OE unit, at 480CFM the stock unit was seeing 452mmwg restriction while the Revo unit only saw 371mmwg some 21% less restrictive, even at 540CFM the Revo intake only saw 467mmwg restriction and still had more headroom. The graph below shows the flow test and comparison between the OE and Revo intakes.   FITTING   Manufacturer Model Variant Year Audi TTRS 8J 2017> Audi RS3 8V 2018>   DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Carbon Series TTRS Intake Instructions

Read more less