Performance - Audi TTRS 8S

Wheel spacer and bolt kits to suit your 5x112 / 57.1mm VAG vehicle for a quick and easy solution.These kits are designed to work with Genuine OE Alloy Wheels and come with the Wheel Spacers and the correct wheel bolts to suit. We highly recommend that you measure your vehicle fully loaded to see what size spacers are required. Notes: - Wheel spacer sizes should be carefully considered- Wheel bolts included use the standard 17mm Hex, so no need for any special tools- Designed to work with Genuine OE Alloy Wheels - May not be compatible with Aftermarket Alloy Wheels- Wheel bolts should be tightened to 120nm (88.5lb/ft) and rechecked after 25 miles. 

Read more less

These 2 piece discs are suited only for install with our rear adaption kit DI0019.If you do not have the kit already fitted please purchase these discs with the DI0019 kit here: The 2 piece brake discs are assembled with custom outer rotors available in plain, grooved or hooked. Matched with our lightweight aluminium bells anodised in black, this brake disc setup is not floating. Included in our kit: 2x 356x22 2 piece rear brake discs To complete this front brake kit you will need:1x DI0019 bracket kit1x Set of brake pads to suit your driving style Weight Per Disc:6.77kg FITS: AUDI A3 8V AUDI S3 8V AUDI RS3 8V AUDI TTRS 8S SEAT LEON MK3 SKODA OCTAVIA MK3 VW GOLF MK7

Read more less

Type of Application:DS2500 - Off Road Use'Track Day' - Front and Rear of vehicle'Rally' - Rear of vehicle'Circuit Sprint' - Rear of vehicle'Formula' - Front and Rear of vehicle DS3000 - Off Road Use'Rally' - Front and Rear of vehicle'Circuit Sprint' - Front of vehicle'Formula' - Front and Rear of vehicle As a general guide we recommend that you consider the following when making your material compound selection: 4WD cars = same compound front and rear Rear traction cars = same compound front and rear. Front traction cars = high friction level in the front axle (i.e. DS3000), lower friction level on the rear axle (i.e. DS2500, 4003). For further advice please contact us. DS2500 (H)Track day & light race use for all vehicle types.Road style refinement but with race material ability to withstand heat with respect to life and μ.Average friction coefficient of 0.42 over working temperature range of 20°C to 500°C. DS3000 (R)Heavy duty all-round material choice.Multiple applications - touring car, rally, single seat.Average friction coefficient of 0.48 over working temperature range of 200°C to 650°C.

Read more less

The calipers included in this kit are 4 Piston AP Racing Radical 2. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with A2 stainless steel spring washers. This brake kit is a great way of saving weight from the front axle too compared to the OE 340mm set up found on the Mk7 Golf R, GTI with upgade and Audi S3 8V our kit weighs in at 10.35Kg less: VBT Caliper Carrier - 0.415KgOE Caliper Carrier   - 2.270KgAP Caliper with brake pads - 4.390KgOE Caliper with brake pads - 6.060KgAP/VBT 362x32mm discs - 8.640KgOriginal 340mm discs      - 10.360Kg VBT Fitting Kit & Lines - 0.242KgOE Fitting Kit & Lines   - 0.158Kg Included in our kit: 2x 4 Piston AP Racing Radical 2 calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Set of brake pads to suit your driving style and needsBrake fluid to flush system when installing FITS:  AUDI A3 8P AUDI S3 8P AUDI A3 8V AUDI S3 8V AUDI TT 8J AUDI TTRS 8J AUDI TT 8S AUDI TTRS 8S SEAT LEON MK2 1P SEAT LEON MK3 5F SEAT TOLEDO 1M SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW CADDY MK3 2K VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1B VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

VBT Cross Drilled 310x22mm Rear Brake Discs The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance The price is for 1 pair of discs FITS: AUDI RS3 8V AUDI A3 8P AUDI A3 8V AUDI S3 8P AUDI S3 8V AUDI TT 8S AUDI TTRS 8S CUPRA ATECA CUPRA FORMENTOR CUPRA LEON SPORTSTOURER SEAT LEON MK3 5F SKODA OCTAVIA MK3 5E VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less