Performance - Audi TTS 8J

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Fits Coupe model only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi TTS performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. The demo car used in the pictures is fitted with 3.5" (88.9mm) tailpipes (YTP9). Please note: Fits Coupe version only and will not fit the TTS Roadster. Press Release Cobra Sport has managed to achieve a power boosting system for the TTS which delivers impressive results in both bhp and torque, yet also combines with the marques core values of providing a classy, quietly sporty drive. The OE system was replaced with a 3"/76.2mm bore upgrade and with the top conversion, a complete turbo back system including a de-cat (re-map required), the power gains are substantial, providing an impressive 35% increase in BHP and torque results showing a 27.5% increase. Tailpipe finishes are available in a choice of traditional highly polished stainless steel or matt black in quad 3"/76.2mm or a more defined 3.5"/88.9mm, these tailpipes are a round design and shaped to fit nicely into the smooth lines of the TTS, subtly hinting at the performance upgrade underneath the car. Matt Thomas, Sales Manager at Cobra Sport offers his verdict on the TTS upgrade "The fantastic power gains achieved with this car are quite astonishing when you consider that only a fractional decibel level increase was recorded, this truly allows for customers to benefit immensely from a Cobra Sport system without it interfering with the day-to-day drivability of the car As always Cobra Sport are willing to back up their promises on quality, with a lifetime guarantee for customers who purchase the exhaust upgrade. Usual refinements include, hand finishing using advanced TIG welding techniques and all Grade 304 stainless pipework being formed expertly on CNC Mandrel bending machines, which ensures the smoothest of gas flow, with precision jig manufacturing to ensure a perfect fit.

Read more less

A direct replacement for the standard part, Direnza radiators feature twin-core technology for optimised cooling capability. Constructed from aircraft grade aluminium (a material well-known for its excellent thermal conductivity), our radiators are the perfect addition to any car, including those driven hard on track. Designed and developed in-house by Direnza engineers, our radiators provide as much as 40% additional cooling capacity compared with standard radiator systems, their robust yet intricate design, and exceptional cooling performance a testament to our R&D processes. Direnza radiators are TIG-welded for additional strength and durability. TIG welding also provides a more precise finish than MIG welding, and reduces stress on the material at hand. Our radiators will enhance the appearance of any engine bay. Fitment Audi A3 8P1 8PA 1.2 1.4 TSI TFSI 2007-2013 modelsSeat Altea 1.2 1.4 TSI 2007-2016 modelsSeat Altea XL 1.2 1.4 TSI 2007-2016 modelsSeat Leon 1.2 1.4 TSI 2008-2012 modelsSkoda Octavia 1.2 1.4 TSI 2004-2013 modelsSkoda Rapid 1.4 TSI 2012-2016 modelsSkoda Superb 1.4 TSI 2008-2015 modelsSkoda Yeti 5L 1.2 1.4 TSI 2009-2016 modelsVW Beetle 1.2 TSI 2011-2016 modelsVW Caddy MK3 1.2 TSI 2010-2016 modelsVW EOS 1.4 TSI 2008-2015 modelsVW Golf MK6 1.2 1.4 TSI 2008-2016 modelsVW Golf Plus 1.2 1.4 TSI 2007-2013 modelsVW Jetta MK3 1.2 1.4 TSI 2007-2016 modelsVW Passat 1.2 1.4 TSI 2007-2014 modelsVW Scirocco 1.4 TSI 2008-2016 modelsVW Touran 1.2 TSI 2010-2015 models. Product Category Intercooler / Radiator Part Number DZRA083 Intercooler / Radiator - Core Height (mm) 400mm Intercooler / Radiator - Core Length (mm) 650mm Intercooler / Radiator - Core Width (mm) 40mm Intercooler / Radiator - Inlet Size (mm) 22 (push) Intercooler / Radiator - Outlet Size (mm) 22 (push) Intercooler / Radiator - Overall Height (mm) 480

Read more less

Racing Cat-back: Resonated (quieter). No ECU tuning required, uses OE Tips and includes Active Exhaust Valve (works with Sport button to release extra sound when required) Part No. Description Tailpipe Pipe Diameter Race EC MSAU471 Twin Front Silencer Assembly 3.00" (76.20mm) MSAU500 Rear Silencer Assembly Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Large-bore Downpipe and De-cat-Must be fitted with the Milltek Sport 2.75" cat-back systems and requires a Stage 2 ECU remap Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU747 Large-bore Downpipe and De-cat-Must be fitted with the Milltek Sport 2.75" cat-back systems and requires a Stage 2 ECU remap 76.2 3 Yes No No   Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Must be fitted with the Milltek Sport 3-inch Race cat-back systems and requires a Stage 2 ECU remap Part No. Description Tailpipe Pipe Diameter Race EC MSAU342 Downpipe and Hi-Flow Sports Catalyst 3.00" (76.20mm) MSVW398 Connecting Pipe for MSAU342 to MSVW399/MSVW399REP Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Must be fitted with the Milltek Sport 3-inch Race cat-back systems and requires a Stage 2 ECU remap Part No. Description Tailpipe Pipe Diameter Race EC SPF2861-80 or SPF3365-80 SuperPro Lower Engine Mount Insert MSVAG04 Cast Large Bore Downpipe with De-cat 3.00" (76.20mm) Yes MSVW398 Connecting Pipe for MSAU342 to MSVW399/MSVW399REP Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

For use with the 2.75" cat-back system. Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap Part No. Description Tailpipe Pipe Diameter Race EC MSAU440 Downpipe and Hi-Flow Sports Catalyst 3.00" (76.20mm) MSAU438 Link Pipe Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Non-resonated (louder). Quad Special Polished Part No. Description Tailpipe Pipe Diameter Race EC MSAU545REP Centre Silencer Replacement Pipe 2.75" (69.85mm) MSAU546 Link Pipe MSAU547 Rear Silencer Assembly (inc. Tips) Quad Special Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Fits Coupe model only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi TTS performance exhaust is made in 3"/76.2mm pipework and fits from the turbo backwards (Turbo back system) these exhausts replace the front pipe, standard catalyst, centre and rear sections. The high flow sports cat version will enable you to pass a UK MOT emissions test or police road side checks. The de-cat exhaust is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.  The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. (Except turbo gasket). The demo car used in the pictures is fitted with 3.5" (88.9mm) tailpipes (YTP9). Please note: Fits Coupe version only and will not fit the TTS Roadster. Press Release Cobra Sport has managed to achieve a power boosting system for the TTS which delivers impressive results in both bhp and torque, yet also combines with the marques core values of providing a classy, quietly sporty drive. The OE system was replaced with a 3"/76.2mm bore upgrade and with the top conversion, a complete turbo back system including a de-cat (re-map required), the power gains are substantial, providing an impressive 35% increase in BHP and torque results showing a 27.5% increase. Tailpipe finishes are available in a choice of traditional highly polished stainless steel or matt black in quad 3"/76.2mm or a more defined 3.5"/88.9mm, these tailpipes are a round design and shaped to fit nicely into the smooth lines of the TTS, subtly hinting at the performance upgrade underneath the car. Matt Thomas, Sales Manager at Cobra Sport offers his verdict on the TTS upgrade "The fantastic power gains achieved with this car are quite astonishing when you consider that only a fractional decibel level increase was recorded, this truly allows for customers to benefit immensely from a Cobra Sport system without it interfering with the day-to-day drivability of the car." As always Cobra Sport are willing to back up their promises on quality, with a lifetime guarantee for customers who purchase the exhaust upgrade. Usual refinements include, hand finishing using advanced TIG welding techniques and all Grade 304 stainless pipework being formed expertly on CNC Mandrel bending machines, which ensures the smoothest of gas flow, with precision jig manufacturing to ensure a perfect fit.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi TTS performance exhaust is made in 3"/76.2mm bore pipework and fits from the turbo to the standard centre section. The sports cat exhaust option will enable you to pass a UK MOT emissions test or police road side checks.åÊThe de-cat exhaust is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.åÊ All relevant fittings and gaskets are supplied. (Except turbo gasket). Please note: This front pipe fits both the Audi TTS Coupe and TTS Roadster. Media British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Scorpion Exhausts Audi TT S Mk2 Titanium cat-back system Fits Years 2008 to 2014 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAU026-TI Product Type Titanium Cat-Back Resonated Non-resonated Fitment Years 2008 - 2014 Fits To OEM / Scorpion Pipe Diameter 70mm/2.75" * Tailpipe STW (quad) Tailpipe Diameter 87mm Shipping Dimensions 0cm x 0cm x 0cm Notes Titanium cat back system

Read more less