Performance - BMW 3 Series All Models

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Fits: F30 / F30 LCI (Saloon) & F31 / F31 LCI (Touring / Estate) M-Sport models (additional quad exit panel required).åÊSave 30% on the matching rear diffuser panel when purchased together (see part code: RP01). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 330D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 330D Saloon and Touring vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M3 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP01)åÊwhen purchased with this exhaust (retail customers only).åÊ This cosmetic performance exhaust upgrade is focused on improving the styling of the 330D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 330D, with the launch of a BMW M3 style quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M3 to the rear of their 330D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit the F30 Saloon and F31 Touring 330D models with the M-Sport bodykit with the addition of a quad exit M3 style lower rear panel (available separately). Once fitted, the new Cobra Sport 330D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport's Sales Manager says "We've seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 330D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 330D cosmetic exhaust upgrade has been specially designed to offer a marginally deeper exhaust tone overall but stay within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the330D is finished with a pair of specially designed twin 3̢‰âÂå� (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M3. Media Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Fits: F30 Saloon and F31 Tourer models (Inc. 2WD & X-Drive) 2011 - June 2015 Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 320D performance exhaust is made in 2.25"/57.15mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This exhaust will only fit with the M-Sport rear bumper and 340i M-Sport lower rear panel which is available directly from the related items section (Part No. RP02). This cosmetic performance exhaust upgrade is focused on improving the styling of the 320D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have now added the BMW 320D to their ever popular range of dual exit conversions with the launch of a BMW 340i style dual exit conversion. For those seeking to achieve the more aggressive and sporty look of the 340i to the rear end of their 320D, Cobra Sport now offer a dual exit rear box cosmetic upgrade section which makes a bold statement. This exhaust has been designed to fit neatly with the M-Sport rear bumper and the 340i M-Sport lower rear panel (available separately). Once fitted, the new 320D exhaust system and replacement body panels look entirely at home on the car and gives the 320D a much sportier edge. This conversion which will fit the 2WD & X-Drive models, is the latest in our range of cosmetic upgrades for BMW models and is available as a direct fit rear box section. Matt Thomas, Cobra Sport‰۪s Sales Manager says ‰ÛÏWe‰۪ve seen a growing trend of people wanting to achieve the look of the more recognisable 340i‰۪s dual exit exhaust on the more economical diesel model, our dual exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. "The Cobra Sport system produces a slightly deeper exhaust tone than the O/E system but keeps sound levels very similar. During the 4,000rpm static test the levels remained the same at 78db and at idle the test recorded only a +2db increase registering 59db." The new dual exit exhaust for the 320D is finished with a choice of dual 3.5" (88.9mm) inward rolled baffled or inverted highly polished stainless steel tailpipes which further enhance the appearance the car and match the styling of the popular M-Sport models. Media Example of BMW 320D / 420D Sports Exhaust (Dual Exit Conversion)

Read more less

Fits: F30 (Saloon) & F31 (Touring / Estate) M-Sport models (additional quad exit panel required).åÊSave 30% on the matching rear diffuser panel when purchased together (see part code: RP01). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 335D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 335D Saloon and Touring vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M3 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP0)åÊwhen purchased with this exhaust (retail customers only). This cosmetic performance exhaust upgrade is focused on improving the styling of the 335D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 335D, with the launch of a BMW M3 inspired quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M4 to the rear of their 335D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit the F30 Saloon and F31 Touring models with the M-Sport bodykit with the addition of a quad exit M4 style lower rear panel (available separately). Once fitted, the new Cobra Sport 335D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport‰۪s Sales Manager says ‰ÛÏWe‰۪ve seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 335D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 335D cosmetic exhaust upgrade has been specially designed to offer a marginally deeper exhaust tone overall but stay within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the 335D is finished with a pair of specially designed twin 3‰۝ (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M3. Media Sound example of the closely related BMW 435D Exhaust (Quad Exit Rear Exhaust)

Read more less

Polished Tips. Catalyst replacement pipes only remove the secondary catalysts. Not suitable for xDrive models Part No. Description Tailpipe Pipe Diameter Race EC MSBM155 LH Catalyst Replacement Silencer Assembly 2.50" (63.50mm) MSBM156 RH Catalyst Replacement Silencer Assembly MSBM157 Centre Section MSBM158 LH Connecting Pipe MSBM159 RH Connecting Pipe MSBM160 LH Rear Section 100mm Jet MSBM161 RH Rear Section 100mm Jet MSBM162 Brace Bar Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Including High Flow Sports Cat System Includes: MSBM281 - Y Piece MSBM282 - Catalyst Assembly MSBM284 - Centre Silencer MSBM285 - Rear Silencer MSBM286 x2 - Polished OE Style Tail Pipes MSBM287 x2 - Aux Mounting Brackets Part No. Description Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXBM1064 Full System (including Hi-Flow Sports Cat) 63.5 2.5 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

System Includes: MSBM281 - Y Piece MSBM282REP - Cat Bypass Assembly MSBM284 - Centre Silencer MSBM285 - Rear Silencer MSBM286 x2 - Polished OE Style Tail Pipes MSBM287 x2 - Aux Mounting Brackets Part No. Description Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXBM1065 Full System (including Cat Replacement Pipe) 63.5 2.5 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Including Resonated Cat Bypass System Includes: MSBM281 - Y Piece MSBM283 - Resonated Cat Bypass Assembly MSBM284 - Centre Silencer MSBM285 - Rear Silencer MSBM286 x2 - Polished OE Style Tail Pipes MSBM287 x2 - Aux Mounting Brackets Part No. Description Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXBM1066 Full System (including Cat Replacement Pipe) 63.5 2.5 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Polished Tips Part No. Description Tailpipe Pipe Diameter Race EC MSBM130 Centre Section 2.37" (60.32mm) MSBM169 Rear Silencer Quad 80mm Special Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Can be fitted with the OEM (standard) centre section. Polished Tips Part No. Description Tailpipe Pipe Diameter Race EC MSBM169 Rear Silencer Quad 80mm Special 2.37" (60.32mm) Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Hi-Flow Sports Cat and Downpipe-For Milltek Sport Cat Back Systems Only. Requires a stage 2 ECU remap. Lambda wiring requires to be extended Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXBM1038 Hi-Flow Sports Cat and Downpipe-For Milltek Sport Cat Back Systems Only. Requires a stage 2 ECU remap. Lambda wiring requires to be extended 70 2.76 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cerakote Black Tips Part No. Description Tailpipe Pipe Diameter Race EC MSBM178 LH Connecting Pipe 2.76" (70.00mm) MSBM179 RH Connecting Pipe MSBM173 Rear Silencer Quad 80mm Ceramic Black Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less