Performance - Cupra Ateca

Racingline Brake Kit 5mm Hub Adaptor (Pair) 5×112 – VWR620005MM Clearance over big brake kits is always a challenge, especially with factory wheels. All of RacingLine’s brake kits feature our unique design that allows these 5mm Hub Adaptors to be solidly, mechanically mounted onto the front face of the disc to give you that extra clearance. No more adding loose spacers onto your car. Fitting and removal of the Hub Adaptor is a simple, reversible upgrade that takes minutes to do. If you ever plan to change wheels in the future, or if you run different wheels for road or track, or winter and summer, just fit or remove the adaptors to suit. As these Hub Adaptors are mechanically locked onto the disc hub, They aren’t  classified as spacers in countries where spacers are illegal. The 5mm of extra space will mean that the OEM factory wheels will fit over our brake kits. POSITIVE FIXATION  Clever ‘petal’ design (female on the disc, male on the Hub Adaptor) plus a fixing screw physically locks the two parts together. HIGH QUALITY Beautiful midnight-black gloss anodised finish will keep the Hub Adaptors looking beautiful and  corrosion -free. INSTALL & REMOVE Removal and refit just takes minutes to do if you ever change your wheels. Perfect for the: RacingLine Stage 2 Monoblock Performance Brake Kit RacingLine Stage 3 Forged Monoblock Performance Brake Kit​ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR620005MM

Read more less

Racingline DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381 It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. What’s included in the kit Oil cooler mounting brackets AN10 210 series Nylon braided feed and return line Billet CNC thermostatic adaptor block Replacement, low-profile oil/water cooler AN10 10-row oil/air cooler core Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar. Product Variations DSG DQ250 6-SPEED VWR29G7250DSG DQ381 7-SPEED VWR29DQ381 Why fit a DSG Cooler Kit? Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation. Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR29DQ381

Read more less

Racingline Stage 2 ‘EVO’ MQB Golf 7/8, S3, Cupra Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Golf 8 2020+> VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi A3 8Y 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TSI 8V evo 2017-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi TTRS 3 2.5 TFSI 8S 2017+> Audi SQ2 2018+> Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+> SEAT Leon IV FW 2020+> SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 5F 2015-2020> Cupra Ateca 2018+> SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Octavia IV NX 2020+> Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR652000

Read more less

Racingline Magnetic Drain Plug for EA888 Gen.3 Engines (with Plastic Oil Sump) – VWR180004 Racingline’s Magnetic Oil Sump Drain Plug is now available for the 1.8 & 2.0 TSI EA888 gen3 and 2.0 TSI gen3B engines. These engines use a plastic oil pan, meaning that normal metal, screw-in sump plugs simply can’t be used. Our new ‘True-Lock’ fitting system means that, at last, you can protect your engine. By attracting and separating out the minute abrasive and ferrous metal particles that are carried by the oil, it prevents them from circulating throughout your engine’s lubrication systems. The harder your engine works, the greater the risk of nasty metallic debris, the greater the benefit of using a magnetic sump plug. Our unique ‘True-Lock’ fitting works with a simple quarter-turn to install the plug, then a PolyCarbonate locking ring ensures that it stays tight and sealed at all times. It’s a lifetime-use plug – simply replace the O-ring at each service. Install couldn’t be simpler – insist on our new Magnetic Billet Sump Plug with your next oil-change and simply screw it in! 2.0 TSI & 1.8 TSI / EA888 Gen 3 engines2.0 TSI / EA888 Gen 3B engines Notes: For plastic engine oil sumps only.

Read more less

Racingline MQB Propshaft Bearing Alignment Kit Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment every time, all of the time. Our precision-engineered, Propshaft Bearing Alignment Kit centralises the factory centre support bearing carrier by cutting out the enlarged factory hole tolerances. Meaning your propshaft is held in perfect true orientation at all times. The oversize holes on the factory brackets are designed to allow several degrees of ‘twist’ on the centre bearing carrier, causing unnecessary long-term stresses on the prop, bushes and bearings. That may be great to help the factory with quick production-line assembly, but will lead to accelerated wear on the bush and rubber housing from misalignment. Every hard launch & shift provokes movement in the drivetrain – over time this risks shifting the factory prop mount out of alignment. This simple alignment kit reduces the bolt hole size down from M14 to M8, allowing no further twist from the brackets and ensuring that your prop cannot move from this position. Fit this Propshaft Bearing Alignment Kit once, then forget it. Drive your car safe in the knowledge that your propshaft will remain in the correct alignment forever more and prolong the life of the bearings and bushings. Prior to our development, we were amazed how many cars were out of alignment from factory! Confirmed Applications For all MQB & MQB Evo AWD modelsVWR810009 VW Golf 8 R 2020+VW Golf 7 & 7.5 R 2013-2020VW Passat 2.0 BiTDI 4Motion B8 2015+VW Arteon 2.0 BiTDI 4Motion 2017+VW Arteon R 2.0 TSI 320ps 2020+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 BiTDI 2016+ Audi S3 8Y 2020+Audi S3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon III Cupra ST 4Drive 5F 2017-2020SEAT Tarraco 2.0 TSI 190ps 2018+Cupra Ateca 2018+Cupra Formentor 310PS 2020+ Skoda Superb III 2.0 TDI 3V 2015-2020Skoda Kodiaq vRS 2018+

Read more less

Racingline Front Subframe Brace for MQB/MQB EVO MQB & MQB ‘evo’ cars rely on either a thin stamped-steel or cast alloy OE front subframe. This subframe has to channel all of the immense forces generating by hard driving. ​RacingLine’s bolt-in Front Subframe Brace provides much needed support and rigidity to aid accurate handling dynamics. Not surprisingly, with all of these forces combining in your subframe, significant deflection results, which affects wheel alignment and harms the precision in your steering as it flexes. RacingLine’s Billet Front Subframe Brace stiffens up the rear of the subframe with an intricately machined aluminium replacement, greatly improving stiffness under load. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. This is a highly recommended upgrade to protect and enhance your car – whether it’s hard-driven, high-power or used on track. Confirmed Applications For all MQB & MQB EVO AWD ModelsVWR810006 VW Golf 8 GTI 2020+VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Golf 7 & 7.5 GTI & Clubsport 2013-2020VW Golf 7 & 7.5 R 2013-2020VW Golf 7 & 7.5 2013-2020VW Passat 2.0 TSI B8 2015+VW Arteon 2.0 TSI 2017+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 TSI 2016+VW Jetta VII GLI 2018+ Audi S3 8Y 2020+Audi A3 8Y 2020+Audi S3 8V 2013-2020Audi A3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon IV FW 2020+SEAT Leon III Cupra 5F 2014-2020SEAT Tarraco 2.0 TSI 2018+SEAT Leon III 5F 2015-2020 Cupra Leon IV FW 2020+Cupra Ateca 2018+Cupra Formentor 2020+ Skoda Octavia IV vRS NX 2020+Skoda Octavia IV NX 2020+Skoda Octavia III vRS 5E 2014-2020Skoda Superb III 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810006

Read more less

Racingline Billet Underbody Tunnel Braces Want to sharpen up your MQB handling responses? MQB Billet Underbody Tunnel Braces mount under the body to help fight body flex. This improves rigidity to help refine the handling, whilst also providing valuable extra clearance for larger diameter exhaust system. What do they do? MQB cars rely on thin stamped-steel OE tunnel braces underneath in an attempt to reinforce the body’s weaker points and limit chassis flex under demanding loads. Our new Billet Underbody Braces replace these weak braces with intricately machined aluminium replacements, greatly improving stiffness, giving much better exhaust clearance and even look great! CNC Machined from a solid billet of 6061-T6 Aluminium, each brace has been engineered to remove unnecessary material whilst still increasing rigidity. With any 3″ diameter exhaust system, the OE brace gives insufficient clearance. So rather than removing the tunnel brace, our new Rear Tunnel Brace at last gives you the option to replace it, giving you the clearance you need plus maintaining crucial body stiffness. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The brace designs mean that installation is simple, using existing body mounting points with no drilling or trim removal required, ensuring fitment is completely reversible. We offer two braces – a Centre and a Rear Tunnel Brace. Owners of FWD cars can fit both, AWD cars can only fit the Rear Tunnel Brace. Looking to fit a larger bore Exhaust System? For large diameter aftermarket exhausts, there simply isn’t clearance space above the factory tunnel brace. Many owners have no choice but to remove the brace. But the brace is there for a reason. With the extra clearance our Rear Tunnel Brace gives, you can now maintain strength and fit your bigger exhaust. VWR810005 – Rear Tunnel BraceVWR810004 – Centre Tunnel Brace (Front-wheel drive only)

Read more less

Racingline Performance Stage 3 Brake Kit - 380mm - MQB Cars The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing.Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. What's in the Kit? - Monoblock Front Brake Calipers (Pair)- Caliper Mounting Brackets (Pair)- Full Mounting Bolt Kit- Braided Steel Front Brake Line Set- Sport Brake Pad Set (Fast Road Use)- 380mm Fully Floating 2 Piece Brake Discs (Pair)If you are looking for replacement brake pad options for this brake kit, Please -- Contact UsNotes: - 380mm kit will fit under 19" Alloy Wheels- Factory 19" wheels and other brands may require spacers- Racingline and Neuspeed 19" wheels will not require Spacers- When using this kit on Track, it is important to remove the dust boots from the caliper pistons.

Read more less

Racingline Performance Stage 3 Brake Kit - 355mm - MQB Cars The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing.Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 355mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. What's in the Kit? - Monoblock Front Brake Calipers (Pair)- Caliper Mounting Brackets (Pair)- Full Mounting Bolt Kit- Braided Steel Front Brake Line Set- Sport Brake Pad Set (Fast Road Use)- 355mm Fully Floating 2 Piece Brake Discs (Pair)If you are looking for replacement brake pad options for this brake kit, Please --> CLICK HERE!! <--Notes: - 355mm kit will fit under 18" Alloy Wheels- Factory 18" wheels and other brands may require spacers- Racingline and Neuspeed 18" wheels will not require Spacers- When using this kit on Track, it is important to remove the dust boots from the caliper pistons.

Read more less

Racingline Magnetic Drain/Fill Plug Set for Haldex (Gen.5) – VWR180002 Catch any ferrous particles in your oil with RacingLine’s Magnetic Haldex Plug set to protect your AWD system. If you drive one of the smaller all wheel drive VWG models, it will use the Haldex system. It’s a clever coupling system that allows the rear drive to be brought in only as it is needed when front wheels loose traction. What does it do? The Haldex oil is very specific and promotes friction between the faces of the multi-plate clutch setup. Inevitably, this wear between the plates causes minute particles to slowly build up as a sludge within the oil. This sludge builds up around the pump’s oil strainer, which gradually stops the Haldex system from working properly. Many owners have experienced their AWD car slowly becoming FWD as this filter blocks up. Our new RacingLine Magnetic Haldex Plug attracts and separates out these minute abrasive and ferrous metal particles, stopping them circulating around the Haldex’s lubrication systems and reducing the sludge that blocks the filter. Install couldn’t be simpler – choose our Magnetic Haldex Plug Kit for your next service. Screw in the two new plugs, and you’re protected. Includes Non-Magnetic Haldex Oil Refill Plug Magnetic Haldex Oil Drain Plug 10 x Washers (Enough for 5 Haldex Services) Confirmed Applications VW Golf 8 R 2020+ VW Golf 7 & 7.5 R 2013-2020 VW Passat 2.0 BiTDI 4Motion B8 2015+ VW Arteon 2.0 BiTDI 4Motion 2017+ VW T-Roc R 2.0 TSI 2019+ VW Tiguan II 2.0 BiTDI 2016+ VW Tiguan II 2.0 TSI 190hp 2018+ VW Golf 5 R32 2005-2008 VW Golf 6 R 2009-2014 Audi S1 2.0 TSI 2015-2018 Audi S3 8Y 2020+ Audi S3 8V 2013-2020 Audi RS3 2.5 TSI 8V evo 2017-2020 Audi TT 3 2.0 TSI 8S 2014+ Audi TTS 3 2.0 TSI 8S 2015+ Audi TTRS 3 2.5 TSI 8S 2017+ Audi SQ2 2018+ Audi RSQ3 F3 2019+ Audi S3 8P 2006-2012 Audi TTS II 8J 2008-2014 Audi TTRS II 8J 2009-2014 SEAT Ateca Cupra 2018+ SEAT Tarraco 2.0 TSI 190hp 2018+ Skoda Superb III 2.0 TDI 3V 2015-2020 Skoda Kodiaq vRS 2018+   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR180002

Read more less

Racingline High-Flow Panel Air Filter 1.5TSI EA211 – VWR11G815 Looking for a simple, warranty-friendly upgrade for your car? Our High-Flow Panel Air Filters, available for all Volkswagen Group ‘MQB’ 1.5 TSI EA211 cars, replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam® filter. Put simply, it’s the best Panel Air Filter you can buy. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow. By removing the inevitable restrictions that the standard paper panel filter gives, our Panel Filter allows a small but worthwhile increase in airflow through to the turbo. Applications – VW Golf 8 1.5 TSI 2020+– VW Golf 7 & 7.5 1.5 TSI 2013-2020– VW Passat 1.5 TSI B8 2018+– VW Arteon 1.5 TSI 2017+– VW T-Roc 1.5 TSI 2017+– VW Tiguan II 1.5 TSI 2016+– VW T-Cross 1.5 TSI 2017+– Audi A1 1.5 35 TFSI GB 2019+– Audi A3 1.5 35 TFSI 8Y 2020+– Audi Q2 35 TFSI 1.5 TSI 2016+– Audi Q3 35TFSI 1.5 TFSI 190hp 2018+– SEAT Ibiza 1.5 TSI 6F 2017+– SEAT Leon IV 1.5 TSI 2020+– SEAT Leon III 1.5 TSI 5F 2015-2020– SEAT Ateca 1.5 TSI 2016+– SEAT Arona 1.5 TSI 2017+– SEAT Tarraco 1.5 TSI 2018+– Cupra Formentor 1.5 TSI 2020+– Skoda Octavia III 1.5 TSI 5E 2016-2020– Skoda Superb III 1.5 TSI 3V 2019+– Skoda Karoq 1.5 TSI 2017+– Skoda Kodiaq 1.5 TSI 2018+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR11G815

Read more less

Racingline Performance Stainless Steel Braided Brake Line Set The ideal first upgrade for your Stock Braking System Racingline Performance Stainless Steel Brake Lines are engineered to replace the standard brake lines with a harder wearing hose that is less prone to expansion under high temperatures.These will not only give a better pedal feel than the standard brake lines, but also last much longer. Compatible with all DOT4 and Performance Brake Fluids This Kit consists of:– 2x Front Brake Lines– 2x Rear Brake Lines– 8x Banjo Washers IMPORTANT NOTES:– YOU WILL NEED TO RE-USE THE EXISTING BANJO BOLTS– THE REAR HOSES ARE ONLY SUITABLE FOR VEHICLE WITH ELECTRONIC HANDBRAKE   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR69G7KIT

Read more less