Performance - Ford Puma MK2 2020

These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Neck Inside Diameter (A):70mm Overall Width (B): 150mm Overall Length: 185mm Component Dimensions Base Width: 150mm Base Length: 37mm Filter Top Width (D): 120mm Filter Base Width: 150mm Filter Length (C): 148mm Item Specifics Base Material: Rubber Polymer Base Finish: Gloss Base Colour: Black Filter Material: Synthetic Filter Reinforcement: Black Wire Mesh If 70mm Filters are sold out, you may receive a 90mm Inlet filter with a 70mm reducer ring! TECHNICAL SPECS Neck Internal Diameter 70mm EAN 5056185609656

Read more less

"Its so good we put our name on it" Giving you the brand new Enhanced Pro Filter - Made by ProRam exclusively for CEUK (RamAir) The filter itself has a 90mm Inlet, and comes with 4x Reducer Rings allowing it to be installed to an 85mm, 80mm, 75mm and 70mm inlet also! A metal end cap allows for our EP Logo & the iconic CEUK logo to be laser engraved, whilst durable rubber polymer is used at the base to provide strength! Reinforced wire mesh holds this synthetic black cotton piece together with the grab bar featuring the iconic ProRam Logo.  The perfect replacement filter for your air intake kit! Neck Inside Diameter (A): 90mm Overall Width (B): 150mm Overall Length: 165mm

Read more less

ITG Air Filter Cleaning Fluid ( 500ml ) CL-1 ITG Air Filter Cleaning Fluid. Used to clean oil and grime out of your ITG Air Filter prior to re-oiling. It can be washed out using water.Comes in a handy pump spray bottle contains 500ml of cleaning fluid.

Read more less

The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.5 ST MK2 Puma. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Add a pro Silicone Hose - Price includes hose clamps Features: Removes ugly original plastic & restrictive airbox Adds power and torque  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Cold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photo Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modifcation that transforms the look of your engine bay.   Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering!   

Read more less

The OE filter is a very restrictive item, The pipercross element frees up airflow within the airbox allowing for more power

Read more less

This tube is designed to be a part of the intake system, generally placed between the Air Filter and primary hose when replacing the Airbox for an Open Air intake kit Measuring 70mm externally from edge to edge and housing the twist type sensors found on post 2015 fords. Pipe is fully black with engraved EP Logo, Featuring Bracket and black screw to secure sensor. Designed to fit with an air filter using a 70mm Inlet Confirmed Fitment: Ford Fiesta MK8 & MK8.5 2018 > Ford Puma ST MK2 2019 > Ford Focus MK4 All Petrol Models 2018 > May fit others.

Read more less

The FMINDK38 is the cold air induction system for Ford’s latest generation 1.5-liter 3-cylinder ST engine. Like with all manufacturers in recent times the need to make smaller engines more efficient and more powerful has been an engineer’s top priority, this then creates a problem for the aftermarket manufacturers to improve what is already fitted to the vehicle, nevertheless this hasn’t stopped us at Forge Motorsport. A large amount of knowledge and knowhow from past development with all Ford models was available to us, however this is a totally new power unit and we needed to spend an extensive amount of testing time to ensure we ended up with a product that gives genuine improvements over the standard air box.    The choice of filter was decided after weeks of real-world testing and hours on the dyno experimenting with different filter options. We found that our Forge pleated filter worked best with an increase in power and torque while maintaining the best filtration properties, the build quality of the filter is superb and carries a limited lifetime warranty. This performance filter has been designed with a high quality silicone coupling and W2 Stainless Steel hose clamps to join the anodized black machined billet velocity stack. The filter is made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. The use of the velocity stack MAF sensor housing maximises as much smooth air flow as possible. Our skilled CAD engineers have simulated different MAF sensor housing models to create the best design for this kit. The illustrations below demonstrate the benefit of using velocity stack science and show the smoothed air flow into the MAF sensor housing and inlet tract from the air filter. With the combination of both the filter and MAF sensor housing we saw total gains of 4bhp however this only tells half the story, if you study the data from the dyno graph you can see the increase in torque from 1500-3000 RPM and again at 4500 until the red line, in fact at 2200 RPM gains of 20NM are achieved. This is also the same with the BHP power figures, you are seeing gains sooner and at the latter stages of the rev range, making the engine perform stronger when you need it to.  On a tuned vehicle this combination is an essential purchase as the OEM air box is found to be too restrictive to achieve the optimum power figures and smooth power delivery. As a bi-product from FMINDK38 the acoustics from the 1.5 engine have been improved, there is now a purposeful induction roar under hard acceleration and a very addictive turbo flutter when you lift off the throttle. Not only to improve the aesthetics but to aid as a heat defence from the hot engine, we have provided a laser cut and powder coated aluminium shield, this surrounds the filter and incorporates the OEM air ducting to direct cold air to the intake. This kit can be installed to the OEM intake pipe or can be paired with our own silicone intake pipe FMINLH21, the key here is to further smooth the airflow to the turbo and eliminate any metal pipework as this is susceptible to greater heat soak and a potential loss in power.   A commonly asked question is will this fit any other aftermarket or the inlet hose intake? The answer is yes it will fit other manufacturers inlet hoses and fits to the original Ford inlet hose.  MAF Boss Manufactured from 6082 aerospace grade aluminium. Black anodised & powder coating for ultimate protection and durability.   Forge Pleated performance air filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. No engine management lights (EML) Increased air flow   Limited Lifetime warranty  

Read more less

ITG Air Filter for the Ford Fiesta ST Mk8 Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering! The ITG Air Filter has been expertly designed in-house by ITG themselves to guarantee you the signature high quality that you'd expect from an ITG system.  Measuring from 161 to 217mm, the Mk8 Ford Fiesta ST Air Filter improves the air flow passing through the standard airbox on the Mk8 Ford Fiesta ST 1.5 EcoBoost (2018-) model. ITG Air Filters Part number: WB285 ITG produce a wide range of air filter systems for a number of make and models, if you're in need of that little extra power or you're just after a superior filter in general to reduce the amount of dust, then the ITG Performance Air Filter is the filter for you. Need to Learn More? Please contact a member of our Mk8 Fiesta ST tuning experts at AET Motorsport for any additional details you require regarding the ITG Air Filter. Our team will be more than happy to help with any questions that you may have regarding the product. Call or Email to discuss: Tel: 01924 228042 | Email: info@aetmotorsport.com

Read more less

Enhanced Performance PUMA MK2 ST Primary Intake Hose Replaces the OEM Restrictive plastic hose connecting the airbox to the crossover pipe. Smooth, Large bore internals allow for increased throttle response, maximum performance and a great sound when coupled with a CEUK Induction Kit! Available in 12 colours and featuring the CEUK logo!

Read more less

NOW IN STOCK The all new Stage 3 ready Intake kit from our sister company Enhanced Performance is here! Replacing the entire system from the Airbox to the turbo, this kit is designed to maximise power! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 1x Silicone Primary Hose (Blue, Red or black) 1x Enhanced Performance Intake Cage 1x Enhanced Performance Sensor Tube 1x Enhanced Performance Filter (Pro Cotton, Foam or Standard Cotton) 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power!

Read more less

NOW IN STOCK The all new Stage 3 ready Crossover Pipe from our sister company Enhanced Performance is here! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power! Will fit with any other brand of silicone / primary hose including RamAir & Pro Alloy

Read more less

ITG Air Filter to suit Ford Fiesta Mk 8 ST 1.5 EcoBoost & 1.0 EcoBoost from 04/2018 onwards. mk2 puma st ITG Air Filter Code WB280 measures 161 x 217mm Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering!

Read more less