Performance - Ford Ranger T7

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

CEUK ChromoLite Indicator Upgrade Tired of the orange look of your current indicator bulbs? Want something different? Well here you go! Our indicator bulbs are a mirror reflective silver colour, But still glow Bright Orange. Not only are they brighter than standard, but they enhance the look of your car dramatically by taking away the horrible orange of factory bulbs! These bulbs are the offset pin type, please check they are correct for your car before ordering. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!  It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!

Read more less

Description We introduce to you the IllumiNite D2S Bi Xenon replacement bulb upgrade!  A simple replacement unit, completely plug and play providing phenomenal results. Suitable for any D2S application including self leveling headlights. Upto 50% Brighter than OEM / Standard Headlights providing a safer driving experience at night but without causing glare to other drivers. Suitable for Projectors - Will not burn lenses! Technical Specs Colour: 6000K White Power: 12v / 35w Fitment: D2S Xenon / HID Pack Contents 2x D2S Bulbs Guarantee Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. 14 day Money back guarantee if unsatisfied Subject to product being returned at Buyers cost in a re salable condition!

Read more less

Description: When traveling Abroad, or even in the UK its always best to have a tyre inflator in your vehicle! 12v with fused cigerette lighter plug - up to 300psi. Complete with adapter kit for football and bicycle. 3mtr Cable - Enough to use even on large vehicles.

Read more less

Description: The Slime Smart Spair is "THE SMART WAY TO FIX FLATS FAST". No need to jack-up the car or remove the wheel - just install Slime tyre sealant, plug in the air compressor, turn it on, reinflate and go. Stow it under your car seat or in the boot - The Smart Spair offers a portable solution for flat tire repair. No need to remove the tyre. No need to wait for recovery assistance. Avoid dangerous roadside delays. Fix a flat fast - in 15 minutes or less! Emergency repair kit fixes a in 15 minutes No need to remove the tire 300psi 12v Tyre inflator with adapters included Includes a bottle of Slime tire sealant and a portable air compressor Seals punctures up to a quarter-inch Repairs punctures up to 6mm in tubeless tyres Comes with adapters to inflate mattresses, balls or other inflatables

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

Bespoke Custom Design Mudflaps to fit:FORD Ranger T7 / T8 (2015-2021) Designed for looks & protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance   FORD RANGER MUD FLAPS KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps+ Black Powder Coated - Stainless Steel Brackets & U-ClipsRear Fixing Kit Contents:2 x Rear Mud Flaps+ Black Powder Coated - Stainless Steel Brackets & U-Clipsd Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseThese rallyflapZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.  MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin (Matt-Like) Finish   LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them! Logo available in:-Raptor-Rallyflapz 4x4   please add note to end of order with logo style and colour or contact us:Support@ceuk.org

Read more less

Have you experienced a blown factory pipe or simply looking to upgrade? The OEM chargepipe manufactured from plastic are not built to withstand the extra boost for faster acceleration, and thus will crack especially when the car is tuned. But don’t let this limit your riding experience! The chargepipe upgrade for the FORD RANGER 3.2 is designed from a lightweight, durable aluminium body to ensure long-term performance, a more responsive throttle and further reduces turbo lag. This replacement is also beneficial for those who simply want to ensure the long-term health of their machine, and cars with high mileage are especially at risk of the factory pipe cracking from wear and tear.This kit contains all the necessary parts to upgrade your chargepipe system, the chargepipe comes with a CNC machined flange which provides OEM compatibility thus no additional modifications are needed for the upgrade. Avoid blow-out and have peace of mind with the purchase of this Aluminium chargepipe and Turbo to Intercooler Pipe. FEATURES CNC machined flange Coated in Black High quality aluminium OEM mounting system Includes all the necessary hardware for installation Masata Lifetime Warranty COMPATIBILITY FORD RANGER 3.2

Read more less

Active Sound (ASU) from Milltek Sport is an innovative solution to enable a user controllable exhaust sound to be made on vehicles that traditionally lack the sound and tone that owners desire; suitable for a wide range of vehicles, the growing range includes Hybrid’s, EV and diesels. Including 8 selectable sound files, volume, pitch and tone adjustment with user configurable profiles all controlled via Milltek’s own iPhone or Android app       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

AIRTEC Motorsport Induction Kit for Ford Ranger 3.2 TDCI. Designed to improve performance, without changing the OEM factory look of the engine bay. AIRTEC Part No: ATIKFO32 TECHNICAL DATA AIRTEC Motorsport Induction Kit for Ford Ranger 3.2 TDCi Designed to improve performance without changing the OEM factory look of the engine bay. The AIRTEC induction kit utilises the factory air box set up by replacing the restrictive internal components to improve flow.  You can choose from the option of a full induction kit (air filter & silicone hose), AIRTEC by ITG air filter only or Pro Hoses silicone induction hose only. AIRTEC by ITG filter Manufactured by leading air filter supplier ITG, our reusable air filters feature of a galvanised mesh core for added strength under load. The three stage layered foam allows maximum performance from the air filter, which works differently to the paper or cotton alternatives that can be known to trap and retain particles on the outer layer. Using the latest adhesive technologies to bond the foam layers, ITG filter assemblies are totally resistant to water, fumes, oils and fuels – including any exotic fuels used for racing. The filter consists of the ITG Tri-Foam layered system: Stainless-Steel Wire Mesh CoreTo avoid erosion, only the highest quality of steel is used. Coarse Outer LayerStops large pieces of dirt and foreign matter from penetrating further. Straightens air flow into subsequent layers. Medium Grade Mid-LayerSerious filteration layer that traps most of the harmful dirt that leads to engine failure. Fine Inner Layer.Extracts all the fine particles but still allows full air flow to the engine for maximum performance. Pro Hoses Silicone Induction Hose Designed to replace the plastic factory hose, the four-ply silicone hose has a larger internal diameter for increased flow. The smooth internals means no restrictions or loss in power and increased airspeed through the intake s whilst utilising the OEM PCV take-off location. AIRTEC part no: ATIKFO32

Read more less