Performance - Golf MK7

The ECS Tuning Rear Diffuser Add-On Kit easily installs over the factory rear valance on your 2018+ Volkswagen GTI to provide the appearance of an aggressive diffuser, without the need to remove your OEM valance. Engineered in-house, our rear diffuser overlay will be sure to catch attention and turn heads! Featuring more aggressive outer blades and three new center blades to fill the massive void in the factory valance. Installs easily with our sleek mounting brackets and included hardware.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Overlays the factory valance to provide aggressive rear diffuser styling  Outer blades are designed around the OE blade surfaces and made more aggressive by lengthening and tapering the blade towards the bottom Center blades fill the empty cavity of the OE valance and feature countered upper mating surfaces to the OE valance for a seamless fit The bottom of the valance has provisions for mounting to the OE body brackets Sheet metal brackets are used to mount to the bottom of the OE diffuser using stainless steel hardware and rubber insulated well nuts Textured matte black finish resembles the OE valance texture for OE+ appearance  Manufactured from ABS vacuum formed plastic with UV additives to stand up to the abuse from the elements   KIT CONTENTS Rear Valance Overlay  Rear Valance Mounting Brackets (4) Side Blade Self Tapping Screws (2) Upper Mounting Rubber Insulated Well Nuts (4) Black Oxide Stainless Button Head Screws (6) Black Phosphate Barrel Nut Clips (2)     PRODUCT DEVELOPMENT Our ECS Rear Diffuser Add-On Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing   INSTALLATION AND SUPPORT Need installation tips? We put together a full installation tutorial from start to finish. See our Installation PDF under the INSTALLATION Tab for more information. 

Read more less

Raise the level of style on your VW MK7 Golf R with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures.  *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Raise the level of style on your VW MK7.5 Golf R with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Mounts to existing lower valance mounting locations using heavy duty carbon fiber mounting brackets with supplied hardware An optional well nut insert and machine screw secures the front center of the bumper. Requires drilling into the bumper cover for use.  Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures. The optional well-nut and bolt require drilling into the center of the bumper. Simply position the front lip to the center of the bumper, mark, drill and install the well-nut for a secure fitment.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Upgrade the exterior styling on your 2018+ Volkswagen MK7.5 Golf R with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Please note, our diffuser is not compatible with some larger aftermarket oval exhaust tips Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 Golf R Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information.

Read more less

For vehicles with manual transmission only The GTI isn’t by any means a ‘sloppy’ car in terms of chassis rigidity, but under high-stress environments, like spirited driving or track events, it can flex and deliver a removed driving experience. Our new MK7 Front Subframe Brace is a piece to the puzzle for chassis stiffness that will provide a more connected, rigid, and responsive feeling behind the wheel of your VW.  Our new MK7 Front Subframe Brace is constructed of 6061-T6 Billet Aluminum and CNC machined for a perfect finish. Available in both anodized black and red aluminum, this brace is attractive and functional as a structural improvement and designed to fit with our existing Pendulum Mount upgrade and Street Shield Skid Plate so you don’t have to choose between excellent upgrade options in your MK7.   PART DESIGN Designed and engineered in-house using laser FARO scanning and 3D CAD modeling software  Constructed from billet 6061-T6 aluminum for structural rigidity  Machined pockets for reduced weight Low profile design maximizes ground clearance. Compatible with our ECS Billet Pendulum Dogbone Mount and ECS Street Shield Skid Plate.  Reduces subframe deflection by directly bracing lower control arm mounting points  Machined ECS logo    KIT CONTENTS Billet Aluminum Front Subframe Brace (Black or Red Anodized) Packet of thread locking compound  Replacement front control arm bolts - QTY 2   PERFORMANCE FEATURES Reduces front subframe deflection by bracing both front control arm mounting points   PRODUCT DEVELOPMENT Our ECS Billet Front Subframe Brace was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing

Read more less