Performance - Golf MK8 All Models

REAR BODY BRACE Want to sharpen up your Golf 7 & 7.5 handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. WHAT DOES IT DO? Modern cars like the Golf 7 & 7.5 run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That's why the Clubsport S Golf gets a factory rear brace.  The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together. The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis. By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do. Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible. Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace. LOW PROFILE Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation. EASY INSTALL/REMOVE Clever design means fitting is quick and simple. Completely reversible without trace for removal.  NO DRILLING No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify. PRACTICAL Compatible with rear seats up or down, and we've even added in the luggage tie-downs into the mounting points. LIGHTWEIGHT A ruthless approach to weight-saving. Billet aluminium mounting brackets bonded to ultra stiff 3K twill carbon link bars. ADJUSTABLE Every mass-produced car body has small differences in dimensions. The brace is tensioned after fitment for ultra-tight alignment to your car. Confirmed Fitment Golf Mk7 Hatch Golf Mk7.5 Hatch Golf Mk7 Estate Golf Mk7.5 Estate  

Read more less

Racingline Sport Lowering Springs VW Golf Mk8 R (Hatch) – VWR31G80R Lowering Range:* 20mm Front and Rear Racingline lowering springs are the perfect first addition to your Mk7 Golf R. If you use your car on a daily basis and are only looking to uprate one aspect of your car, you can’t do better than our VWR Sport Springs. They replace the car’s four standard springs with re-engineered, different-rate and slightly shorter Sport Springs. The vehicle’s center of gravity is lowered, reducing body roll for better dynamics, whilst maintaining the ride quality and comfort of your car. Meanwhile, the car’s appearance is transformed. By getting rid of those nasty wheelarch gaps, it’ll look like it always should’ve from the factory! Compatibility VW Golf 8 R 2021+ (Hatchback models only) Perfect Performance. Many experts consider suspension development to be as much an art as a science. In truth, it’s a bit of both. Go lower or stiffer than our springs and your car will bounce and crash as the dampers are mismatched to spring-rate, and the springs themselves run out of travel. Our progressive-rate spring construction means the spring rate in the middle of travel is very similar to standard. It’s only towards the end of the spring’s travel (so, when braking or cornering hard) that we have engineered the spring to stiffen up. It’s this progressive-rate spring design that gives such good ride quality. Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR31G80R

Read more less

Racingline Adjustable Rear Droplinks MQB/MQB Evo – VWR520000 Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements. Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier. Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. Vehicle FItment – VW Golf Mk8 2020+– VW Golf Mk7 & Mk77.5 2013-2020– VW Passat B8 2015+– VW Arteon 2017+– VW T-Roc 2017+– VW Tiguan II 2016+– Audi S3 8Y 2020+– Audi A3 8Y 2020+– Audi S3 8V 2013-2020– Audi A3 8V 2013-2020– Audi RS3 2.5 TSI 8V 2017-2020– Audi TT 3 8S 2014+– Audi TTRS 8S 2017+– Audi SQ2 2018+– Audi RSQ3 F3 2019+– Audi Q3 2019+– Audi Q2 2017+– Cupra Leon IV FW 2020+– SEAT Leon III 5F 2015-2020– Cupra Ateca 2018+– Cupra Formentor 2020+– SEAT Tarraco 2018+– Skoda Octavia IV NX 2020+– Skoda Octavia III 5E 2014-2020– Skoda Superb III 3V 2015+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR520000

Read more less

When using the car on track it is impossible to setup proper rear camber with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment.  Now it is possibile to easily setup and maintain desired camber on your track car. For that reason we have come up with inserts for wheel bearing housing and rear lower wishbone that the spring sits on. Our inserts use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track TTRS. Product functionalities:– no rubber to bend, you will not loose the geometry while cornering that was set when doing aliment Features:– CNC machined form 7075 aluminium and anodized in black and silver– M18 and M16 uniball– metal bushings galvanized in black What is included:– four inserts (this is a kit for one car) Used in  cars (type numbers in brackets): 2013 +  Audi A3/S3/RS3 (8V & 8VFL MQB) 2013 +  Audi A3 (8V & 8VFL MQB) 2015 +  Audi TT/ TTS /TTRS (8S MQB) 2013 + Volkswagen Golf/GTI (Mk7 MQB + Mk8) 2013 + Volkswagen Golf/GTI/R (MkVII MQB) 2012 + Seat Leon (5F MQB) 2017 + Audi Q2 (quattro) Replaces:– 1K0505553A / 1K0 505 553A – uprights bush– 5Q0505553 / 5Q0 505 553 – inner bush Note: Installation of this rear insert kit will introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.

Read more less

AG MQB Lightweight Alloy Lower Front Control Arm Kit SuperPro's lightweight alloy front control arm kits deliver more caster, camber and eliminate unwanted flex.Exclusive to SuperPro, their alloy arms feature DuroBall rear bushings which are spherical joints embedded in the firm's unique Polyurethane for incredible control without introducing noise, vibration or harshness.These arms are the best upgrade available. Caster and camber increase gives more steering weight and feel as well as more fun.ALOY0018K offers a 38% weight saving over the OE arms, increased strength, increased caster, increased camber and much longer service life than the standard factory arms...and they look incredible too!SuperPro Tip:Care needs to be taken with aggressively lowered vehicles with non standard tyre and wheel packages to avoid tyre/guard contact.We also offer standard alignment steel front control arms (TRC1070-MOD) for the same MQB-chassis vehicles which, although they are heavier and don't feature caster increase bushes / anti-lift, they do have upgraded SuperPro bushes so will be a long-lasting simple upgrade. Kit Includes: 2 x Arms Shipping Weight: 7.7250kg Stock Details: Country of Origin: AUEAN: 9317745781158 Suitable for: Audi A3 MK3 8V1 3-Door Hatchback Front Wheel Drive (2012 to 2016) Audi A3 MK3 8VA 5-Door Sportback Front Wheel Drive (2012 to 2016) Audi A3 MK3 8V1 3-Door Hatchback quattro (2012 to 2020) Audi A3 MK3 8VA 5-Door Sportback quattro (2012 to 2020) Audi A3 MK3 8VS Saloon / Limousine Front Wheel Drive (2013 and later) Audi A3 MK3 8VS Saloon / Limousine quattro (2013 and later) Audi A3 MK3 8V7 Cabriolet Front Wheel Drive (2013 to 2019) Audi A3 MK3 8V7 Cabriolet quattro (2014 to 2019) Seat Leon MK3 Front Wheel Drive (2012 and later) Skoda Karoq NU7 Front Wheel Drive (2017 and later) Skoda Octavia MK3 All-wheel Drive (2012 and later) Skoda Octavia MK3 Front Wheel Drive (2012 to 2016) Volkswagen Caddy MK3 Typ 2K Second Facelift Front Wheel Drive (2015 to 2021) Volkswagen Golf MK7 4MOTION (2012 to 2019) Volkswagen Golf MK7 Front Wheel Drive (2012 to 2019) Volkswagen Golf MK8 Front Wheel Drive (2019 and later) Volkswagen Golf MK8 4MOTION (2020 and later) Volkswagen Golf Alltrack BA5 All-wheel Drive (2014 to 2020) Volkswagen Tiguan AD Front Wheel Drive (2016 and later) Volkswagen Tiguan AD 4MOTION (2016 to 2020) Volkswagen T-ROC A11 4MOTION (2017 and later) Volkswagen T-ROC A11 Front Wheel Drive (2017 and later)

Read more less

Please note: all lowering amounts are measured off of standard shassis models, this would not include Sports, Slines or Msports unless stated. These models may be lower then the standard chassis models out of the factory meaning you will not see the full measurment stated. SPORTLINE | Sport Performance Springs Extreme Performance Meets Extreme Style Race-Car Like Handling Lower than our Pro-Kit. Progressive Spring Design for Excellent Ride Quality Part of the Eibach B12 Sportline Eibach Sportline is the extreme-performance spring set created for the extreme enthusiast the one who craves a racecar attitude for maximum street performance with the lowest possible drop, but with the exceptional ride quality you expect from Eibach. Engineered with the same care as our Pro-Kit springs, Eibach Sportline springs achieve legendary handling by aggressively lowering your car?s centre of gravity, using our precision-engineered progressive spring rates. By radically lowering your car?s centre of gravity, our Sportline springs dramatically reduce squat during acceleration, body roll in corners and nose-dive under braking. By using our proprietary, progressive spring design, our Sportline springs provide the ultimate balance between high performance, extreme lowering and comfortable ride quality. When combined with wider or lower offset wheels, the result is a car that handles just as great as it looks.     Vehicle Fitments for Eibach Sportline Performance Spring Kit E20-85-051-06-22 Make Model Spec VW GOLF VIII (CD1) 2.0 R 2020 - On

Read more less

034Motorsport's Dynamic+ Camster Mounts are engineered to significantly improve handling performance for Volkswagen and Audi MQB & MQB Evo vehicles. Designed as a true drop-in upgrade, the Dynamic+ Camster Mount Pair provides an additional 1.5 degrees of negative camber at each of the front wheels to improve both turn in and cornering grip. 034Motorsport Dynamic+ Camster Mounts also add 1.0 degree of additional caster to each of the front wheels to improve high speed stability and cornering ability. This addition of positive caster increases dynamic negative camber while cornering, maximizing the available grip when turning. Dynamic+ Camster Mounts are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, and precise steering response. Equally well-suited for the street and track, Dynamic+ Camster Mounts deliver a perfect balance of performance, durability, and comfort. Most importantly, Dynamic+ Camster Mounts provide a fixed camber and caster increase without the cost, noise, and complexity of adjustable camber plates.   DYNAMIC+ CAMSTER MOUNT BENEFITS: Reengineered Suspension Geometry for Performance Driving Additional 1.5 Degrees of Negative Camber at Each Front Wheel (Compared to Factory Strut Mounts) Additional 1.0 Degree of Caster at Each Front Wheel (Compared to Factory Strut Mounts) Significantly Enhanced Cornering Grip Improved Steering Feel & Handling Response Reduced Strut Mount Deflection to Maintain Proper Strut Alignment Under Cornering Load Significantly Reduced NVH (Noise, Vibration, Harshness) Increase Compared to Spherical Camber Plates Billet Aluminum Construction with Replaceable Density Line Rubber Inner Pucks MORE CAMBER, MORE CASTER, MORE GRIP: Dynamic+ Camster Mounts are machined from 6061-T6 Aluminum and feature 75 Durometer Density Line Rubber center pucks to minimize strut shaft deflection, while simultaneously preventing unwanted noise, vibration, or harshness (NVH) from being transmitted into the cabin. The Dynamic+ Camster Mount Pair is fully rebuildable, and includes new high-grade strut mount bolts for installation.These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Dynamic+ Camster Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.Dynamic+ Camster Mounts were tested extensively on the street and at the track with multiple 034Motorsport Development Vehicles before release to ensure that they deliver excellent performance and durability. FEATURES & FITMENT: Features: Complete Drop-In Replacements for Factory Strut Mounts CNC-Machined from 6061-T6 Aluminum with Clear Anodized Finish Proprietary 75 Durometer Rubber Inner Pucks Durable, Rebuildable Design Sold in Pairs - New High-Grade Strut Mount Bolts Included

Read more less

Golf Mk8 ‘R’ Hatch Spring and Damper Kit Racingline Performance Dampers: When it comes to sport dampers the compromise between performance and comfort has been a persistent dilemma for keen drivers and enthusiasts. With the RacingLine Performance Sport Damper kit, which consists of two front and two rear shocks, this dilemma becomes a thing of the past for MQB multi-link platform at an affordable price. Fitting the RacingLine Performance Sport Damper kit ensures superior road-holding and a positive transformation in handling characteristics without compromising comfort. Our Sport Dampers are designed to maximise comfort and performance on all road conditions, and driving styles; guaranteeing greater stability, control and therefore driving pleasure. Racingline Performance Lowering Springs are also included in this kit. Lowering Range:20-25mm Front and Rear Special Notes:Only suitable for 3-door and 5-door Hatch ModelsNot suitable for ‘ST’ Estate/Wagon ModelsNot suitable for vehicles with DCC / Magnetic ride suspension Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR30G80R

Read more less

Golf Mk8 GTI Hatch Spring and Damper Kit Racingline Performance Dampers: When it comes to sport dampers the compromise between performance and comfort has been a persistent dilemma for keen drivers and enthusiasts. With the RacingLine Performance Sport Damper kit, which consists of two front and two rear shocks, this dilemma becomes a thing of the past for MQB multi-link platform at an affordable price. Fitting the RacingLine Performance Sport Damper kit ensures superior road-holding and a positive transformation in handling characteristics without compromising comfort. Our Sport Dampers are designed to maximise comfort and performance on all road conditions, and driving styles; guaranteeing greater stability, control and therefore driving pleasure. Racingline Performance Lowering Springs are also included in this kit. Lowering Range:20-25mm Front and Rear Special Notes:Only suitable for 3-door and 5-door Hatch Models Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR30G8GT

Read more less

Racingline MQB Propshaft Bearing Alignment Kit Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment every time, all of the time. Our precision-engineered, Propshaft Bearing Alignment Kit centralises the factory centre support bearing carrier by cutting out the enlarged factory hole tolerances. Meaning your propshaft is held in perfect true orientation at all times. The oversize holes on the factory brackets are designed to allow several degrees of ‘twist’ on the centre bearing carrier, causing unnecessary long-term stresses on the prop, bushes and bearings. That may be great to help the factory with quick production-line assembly, but will lead to accelerated wear on the bush and rubber housing from misalignment. Every hard launch & shift provokes movement in the drivetrain – over time this risks shifting the factory prop mount out of alignment. This simple alignment kit reduces the bolt hole size down from M14 to M8, allowing no further twist from the brackets and ensuring that your prop cannot move from this position. Fit this Propshaft Bearing Alignment Kit once, then forget it. Drive your car safe in the knowledge that your propshaft will remain in the correct alignment forever more and prolong the life of the bearings and bushings. Prior to our development, we were amazed how many cars were out of alignment from factory! Confirmed Applications For all MQB & MQB Evo AWD modelsVWR810009 VW Golf 8 R 2020+VW Golf 7 & 7.5 R 2013-2020VW Passat 2.0 BiTDI 4Motion B8 2015+VW Arteon 2.0 BiTDI 4Motion 2017+VW Arteon R 2.0 TSI 320ps 2020+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 BiTDI 2016+ Audi S3 8Y 2020+Audi S3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon III Cupra ST 4Drive 5F 2017-2020SEAT Tarraco 2.0 TSI 190ps 2018+Cupra Ateca 2018+Cupra Formentor 310PS 2020+ Skoda Superb III 2.0 TDI 3V 2015-2020Skoda Kodiaq vRS 2018+

Read more less

Racingline Front Subframe Brace for MQB/MQB EVO MQB & MQB ‘evo’ cars rely on either a thin stamped-steel or cast alloy OE front subframe. This subframe has to channel all of the immense forces generating by hard driving. ​RacingLine’s bolt-in Front Subframe Brace provides much needed support and rigidity to aid accurate handling dynamics. Not surprisingly, with all of these forces combining in your subframe, significant deflection results, which affects wheel alignment and harms the precision in your steering as it flexes. RacingLine’s Billet Front Subframe Brace stiffens up the rear of the subframe with an intricately machined aluminium replacement, greatly improving stiffness under load. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. This is a highly recommended upgrade to protect and enhance your car – whether it’s hard-driven, high-power or used on track. Confirmed Applications For all MQB & MQB EVO AWD ModelsVWR810006 VW Golf 8 GTI 2020+VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Golf 7 & 7.5 GTI & Clubsport 2013-2020VW Golf 7 & 7.5 R 2013-2020VW Golf 7 & 7.5 2013-2020VW Passat 2.0 TSI B8 2015+VW Arteon 2.0 TSI 2017+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 TSI 2016+VW Jetta VII GLI 2018+ Audi S3 8Y 2020+Audi A3 8Y 2020+Audi S3 8V 2013-2020Audi A3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon IV FW 2020+SEAT Leon III Cupra 5F 2014-2020SEAT Tarraco 2.0 TSI 2018+SEAT Leon III 5F 2015-2020 Cupra Leon IV FW 2020+Cupra Ateca 2018+Cupra Formentor 2020+ Skoda Octavia IV vRS NX 2020+Skoda Octavia IV NX 2020+Skoda Octavia III vRS 5E 2014-2020Skoda Superb III 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810006

Read more less

Please note: spacers are sold as PAIRS! If you want to do front and rear than qty x2 is needed! 5x112 Stud Pattern - 57 Centre Bore Eibach Pro-Spacer Kit 10mm - 10mm per Spacer 12mm - 12mm per Spacer 15mm - 15mm per spacer 20mm - 20mm per Spacer 25mm - 25mm per Spacer Please check if this spacer will fit your car before ordering as they are none returnable! Contact support@ceuk.org if you are unsure! PRO-SPACER | Wheel Spacers Made from high-tensile-strength aluminium alloy Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance All applications tested in rigid durability and fatigue tests High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021) Significant weight advantage compared to wheel-spacers made from steel Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick". With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That's how the cars look gets its final touch. By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behaviour combined with higher stability, as the roll of the chassis is influenced in a positive manner. Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer! You'll achieve optimum looks and enhanced handling by moving your wheels flush with the outer edges of the wheel wells. Simply measure the wheel-well/tyre gap, as shown here, and order the corresponding Pro-Spacers to put your wheels and tyres out where they belong. Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less