Performance - Ibiza MK3 (6L)

AP Racing Formula DOT 5.1 Road / Competition Clutch & Brake Fluid. Formula DOT 5.1 is a premium specification Motor Vehicle Brake and Clutch Fluid which conforms to and exceeds the current international specifications U.S. FMVSS No 116, DOT 3, DOT 4, and DOT 5.1, S.A.E. J1703, SAE J1704 and ISO4925. - Suitable for High Performance Road Applications including vehicles fitted with ABS and ESP. - Superior -40°C (-40°F) viscosity makes it suitable for vehicles operating in cold climates. - AP Racing Formula DOT 5.1 is non silicone based. - AP Racing Formula DOT 5.1 fluid will mix safely with other DOT 5.1 fluids along with DOT 3 and DOT 4 Fluids conforming to the above specifications. - Family Part No. - CP4510-20 (20 Bottles).- Typical™ New Dry Boiling Point - 275°C (527°F)- Wet™ E.R. (Equilibrium Reflux) Boiling Point - 184°C (363°F)

Read more less

WHEEL FITMENT: Whilst we do try to ensure all our brake kits fit behind the majority of wheel types both stock and aftermarket, we make no guarantees that they will. There is a chance you will need wheel spacers to clear our brake kits. Please take the appropriate steps to ensure wheel clearance before final installation. DRILLED DISCS: Drilled discs are intended for light use, if crack form from drilled holes they have been used too hard and this is not something that is covered under warranty. If outright performance is required we strongly recommend grooved or J hooked. FITS: AUDI A1 8X AUDI A3 8L SEAT IBIZA 6J SEAT IBIZA 6L SEAT LEON 1M SKODA FABIA 5J SKODA FABIA 6Y SKODA FABIA NJ SKODA OCTAVIA 1U VW BORA 1J VW GOLF MK4 VW POLO 6R/6C VW POLO 9N PRICES: - All prices shown exclude and include VAT and are correct at time of publishing and are subject to change without prior notice. - Prices do not include Shipping or Installation fees. VAT: - VAT is charged at the current rate of 20% to customers within the European Union Community. BREXIT 2021 EUROPEAN TAXATION CHANGES: For European Customers prices now displayed in cart once you enter your address will have 20% UK VAT Tax removed, however you will have to pay some form of Duties / VAT prior to delivery of your goods. If you are unsure of charges we recommend you should contact your local authorities ahead of placing your order. DISPATCH AND DELIVERY: - Our week day cut off time for same day dispatch on stocked items is 13:00 (GMT/BST). - If you need an item quickly, please contact us by phone on 0044 (0) 161 804 9888 prior to placing the order online to ensure that the item(s) you require is in stock ready to ship, - If you have ordered later than 13:00 (GMT/BST) and are looking for a same day dispatch, this can sometimes be accommodated, but please contact us first so that we can put things in place to achieve this for you. STOCK: - Our website does not display any information regarding an items stock level. Whilst we try to keep plenty of stock of our most popular items, it is not always possible for us to keep one of every option of every product on the shelf ready to ship. - If you need an order by a certain day/date, we strongly recommend you contact a member of our sales team to check the availability of the item(s) you require. - If you are planning to have your items fitted professionally, please wait until you have received and checked your goods before making any workshop or garage appointments. OVERSEAS CUSTOMERS: - We are able to export most of our product range. - If you are situated outside of the European Union Community, UK VAT is not payable. - Depending on delivery destination there may be import taxes/fees, these are your responsibility to pay. - Customers within the EC are charged VAT unless you have a VAT registered business and are able to provide us with a valid VAT number and proof of your business address such as a letterhead or company website. - Due to specific restrictions there are some countries that we can only accept bank transfer payments from.

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Seat Ibiza III 1.4 2002-2009. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Seat Ibiza III 1.8Turbo Cupra 2002-2009. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Seat Ibiza III 1.9 TDi 2002-2009. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Seat Ibiza III 1.9 TDi Sport 2002-2009. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Seat Ibiza III 1.9 SDi 2002-2009. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Seat Ibiza III 1.6 Sport 2002-2009. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

RACE APPLICATION ONLY - NOT FOR ROAD USEThe calipers included in this kit are 6 Piston made by AP Racing. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less

Type of Application:DS2500 - Off Road Use'Track Day' - Front and Rear of vehicle'Rally' - Rear of vehicle'Circuit Sprint' - Rear of vehicle'Formula' - Front and Rear of vehicle DS3000 - Off Road Use'Rally' - Front and Rear of vehicle'Circuit Sprint' - Front of vehicle'Formula' - Front and Rear of vehicle As a general guide we recommend that you consider the following when making your material compound selection: 4WD cars = same compound front and rear Rear traction cars = same compound front and rear. Front traction cars = high friction level in the front axle (i.e. DS3000), lower friction level on the rear axle (i.e. DS2500, 4003). For further advice please contact us. DS2500 (H)Track day & light race use for all vehicle types.Road style refinement but with race material ability to withstand heat with respect to life and μ.Average friction coefficient of 0.42 over working temperature range of 20°C to 500°C. DS3000 (R)Heavy duty all-round material choice.Multiple applications - touring car, rally, single seat.Average friction coefficient of 0.48 over working temperature range of 200°C to 650°C.

Read more less

RACE APPLICATION ONLY - NOT FOR ROAD USEThe calipers included in this kit are 6 Piston made by AP Racing. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less