Performance - Ibiza MK4 (6J)

All the Performance with the Noise! The Hybrid valve is back! In 1999, GFB’s first Hybrid valve pioneered the dual port design, which was so successful the technology has since been adopted by most other brands. By “staging” the two venting outlets, at low valve lifts most of the air is recirculated. As the car is driven harder, the valve opens further and more of the atmosphere venting port is exposed for a louder sound. As a benefit, this system makes it possible to use these valves on cars with sensitive airflow meters that often suffer issues such as backfiring and/or stalling, whilst still achieving the signature blow-off sound. Dual staged venting outlets, can be configured for full recirc, 50/50, or full atmosphere operation using plugs provided TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001   Complete Range of Fitment Options The Hybrid direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. ONLY COMPATIBLE WITH:       Audi A3 A4 TT     Ford FOCUS     Saab 9-3 9-3 CONVERTIBLE 9-5     Seat IBIZA LEON     Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less

All the Performance With or Without the Noise! GFB’s Mach 2 utilises GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce. With its single venting outlet, the Mach 2 is configured from the factory for full recirculation (i.e. plumb back, diverter, bypass) venting for the performance-minded who just want the benefits without the sound. Single venting outlet, factory configured for full recirculating operation Configure for full atmosphere venting with separate atmosphere conversion kit TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001   Complete Range of Fitment Options The Mach 2 direct bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. ONLY COMPATIBLE WITH:     Audi A3 A4 TT     Ford FOCUS     Saab 9-3 9-3 CONVERTIBLE 9-5 Seat IBIZA LEON     Volkswagen BORA GOLF NEW BEETLE PASSAT POLO  

Read more less

Takes over where the factory regulator stops Direct fit replacement for Bosch clip in regulators More than double the flow of the factory regulator, allows increased pump capacity without having to replace the factory fuel rail Gasoline, ethanol, and methanol compatible Double layer/double reinforced diaphragms with a burst strength exceeding 1000psi Teflon co-polymer seat with stainless valve to retain fuel pressure longer after shut down Spring pre-load adjustment platform is o-ring sealed and does not leak vacuum/boost Static pressures adjustable from 1.4-5bar (20-72psi – subject to pump flow and factory return line restriction) Completely serviceable GFB’s popular and compact FX-S Fuel Pressure Regulator is now also available as a direct drop-in replacement for the common Bosch regulators that clip into the fuel rail. If you increase the performance of your engine, you need to ensure your fuel system can deliver the goods or you’re going to have a bad day! Upgrading the fuel pump is the first step, but doing this alone will usually result in excessive fuel pressure, especially at idle. This is because the factory Bosch regulators typically don’t flow enough to support larger fuel pumps, especially with turbo E85 setups that demand high fuel flow rates. Rather than replacing the entire fuel rail, or using an adaptor with a separate fuel pressure regulator, simply clipping in the FX-S 8051 will allow you to run a much larger pump setup even with the factory rail. And if you need to adjust the fuel pressure, that’s no problem - unlike the fixed-pressure Bosch regulators, the FX-S can be adjusted from 1.4bar to 5bar. Like all GFB FX regulators, the FX-S 8051 is compatible with pump gas, Ethanol, or Methanol, and also incorporates a soft Teflon valve seat (rather than metal on metal) that will always positively seal and hold fuel pressure on shut down for reliable engine startups. The double layer diaphragm has twice the reinforcing material of the single layer type used in most regulators, and as a result the burst strength exceeds 1000psi! The 1/8” NPT port can be used for a fuel pressure gauge or electronic pressure sensor, or it can simply be plugged using the port plug provided.       All GFB FX Regulators Feature: 1:1 FUEL PRESSURE RISE RATE SUITABLE FOR UNLEADED, ETHANOL, METHANOL AND DIESEL FUELS DOUBLE LAYER/DOUBLE REINFORCED DIAPHRAGMS WITH A BURST STRENGTH EXCEEDING 1000PSI TEFLON CO-POLYMER SEAT WITH STAINLESS VALVE TO RETAIN FUEL PRESSURE LONGER AFTER SHUT DOWN FULLY SEALED UPPER BOOST/VACUUM REFERENCE CHAMBER STATIC PRESSURES ADJUSTABLE FROM 28PSI TO 72PSI (2-5BAR) COMPLETELY SERVICEABLE MULTIPLE BODY PORTS ALLOW FOR A LARGE VARIETY OF SETUP OPTIONS MANUFACTURED IN AUSTRALIA IN ACCORDANCE WITH ISO 9001 GFB’s Fuel Pressure Regulators are built with the same precision, machining quality, and reliability that is the foundation of all GFB products. The compact size of the GFB FX regulators conceals a large flow capacity, and the multiple ports allow for a variety of fuel system setups including multiple rails and gauge/pressure sensor monitoring. Internally, like all GFB products you’ll find unique features and small touches that make the difference between a good product, and a great one. For example, we use a double-layer, double-reinforced diaphragm with a burst strength exceeding 1000psi (68BAR)! Unlike others that use a metal-to-metal valve seat, the FX regulators feature a replaceable soft Teflon valve seat that helps retain fuel pressure longer after the car is shut down for easier re-starting. We even went to the trouble of adding an o-ring sealed spring hat to ensure no boost/vacuum leakage through the spring adjusting screw. All FX regulators have a 1:1 fuel pressure rise rate and a base pressure range from 28-72psi (2-5BAR).   Only Compatible With:   Alfa Romeo 145 155 156 166 GTV SPIDER Audi 100 80 A2 A3 A4 A6 CABRIOLET COUPE TT Holden COMMODORE Mazda 3 6 CX-7 MX-5 Mitsubishi 3000 GT COLT GTO GALANT LANCER STARION Nissan 180 SX 200 SX 300 ZX GT-R PULSAR SKYLINE Seat IBIZA LEON Subaru FORESTER IMPREZA LIBERTY Toyota CELICA SOARER SUPRA Volkswagen BORA GOLF PASSAT POLO

Read more less

This actuator is compatable with the VAG 1.4 Twincharged engines found in the Audi A1, Seat Mk5 Ibiza / Bocenegra, Skoda Fabia and Volkswagen Polo. This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. Please note some 1.4 TSI twin-charged 160 BHP models have an electronic OE actuator and this Forge Motorsport vacuum operated actuator is not a compatible replacement for the electronic type. The majority of models associated VAG models are fitted with the vacuum type but please check to ensure your engine has the vacuum type before ordering the Forge Motorsport product we offer.   In The Box:1 x FMACVAG07 Actuator1 x Forge Sticker   For Multiple Vehicles

Read more less

This valve kit is for VAG vehicles equipped with the 1.4 TSI twincharged (supercharged and turbocharged) engines that have the electronically controlled bypass valves (2 bolt fitting). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures of the OEM valve, that have occurred. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.   In The Box:1 x FMDVATSI Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x 2000mm Length of 4mm Vac Hose1 x Vacuum Tap2 x M5 x 35 Self Tapper Screw1 x Uprated Blue Spring10 x Cable Ties1 x M5 x 12 Socket Button Screw1 x M5 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker

Read more less

This valve kit is for VAG vehicles equipped with the 1.4 TSI twincharged (supercharged and turbocharged) engines that have the electronically controlled bypass valves (2 bolt fitting). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures of the OEM valve, that have occurred. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.   In The Box:1 x FMDVRTSI Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Skoda Vacuum Tap2 x M5 x 35 Self Tapper Screw1 x Uprated Blue Spring10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x M5 x 12 Socket Button Screw1 x M5 Nyloc Nut1 x Instructions1 x Forge Keyring and Sticker   For Multiple Vehicles

Read more less