Performance - Mini Cooper F56 S

Mini F56 Quickshifter kit The Forge Motorsport F56 Cooper S Quickshifter offers increased feel while shifting, and up to 40% reduction in front to back travel of the gearstick. This reduces shift times along with reducing the chance of selecting the wrong gear, ideal for track day and fast road driving.  Machined in the UK from aircraft grade billet aluminium and clear anodised to prevent corrosion. As with all Forge Quickshifters you can personally customize the throw to suit your own preference, due to a large adjustment range on the pivot mechanism. The pivot point can be adjusted whilst on the vehicle using a 16mm spanner. The Quickshifter kit is supplied with a billet tool to help with the removal of the OEM shifter arm.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

As the official and preferred supplier of tuning products to the Mini Challenge, http://www.minichallenge.co.uk/ ,we can now officially release to the public, the Forge adjustable rear tie bars for various Mini models. This product has been developed for, and tested in, the harshest racing environment of the Mini challenge. After many months of rigorous testing on the F56 model we are now confident we have the perfect solution for a vast range of road going Mini’s.   We started by adding the means of adjustment, and then added strengthening, especially as the development vehicle was used on the track. Then we had polyurethane bushes made by the industries finest Powerflex https://www.powerflex.co.uk/   If you ignore the obvious benefits of reducing uneven tyre wear and improving the tyre surface contact area, the ability to adjust the geometry allows the fine tuning that helps produce faster lap times and race winners. Compared to the OEM installation, you find that the tram lining feel disappears and the turn in is far crisper. For fast road use or track enthusiasts this modification is a must. Of course, if you have other modifications on your car this may be the only way to achieve their full potential.   Manufactured from the highest quality high tensile steel and with EN16T adjusters. Supplied with custom made dirt ingress covers. Forge Mini tie bars are enhanced with a corrosion resistant powder coating process to ensure the   maximum longevity even in the worst environments. Fitted with Powerflex polyurethane bushes which use advanced unique technology. These have the ability to offer high performance without vibration or noise but with exceptionally long life and ideally suited to both road and track. Manufactured in the UK and covered by our industry leading Lifetime warranty.   *See terms and conditions, exclusions may apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a replacement for OEM part number 17517617598 Please note this product does not fit the Mini F57 JCW Official supplier to www.minichallenge.co.uk The Forge F56 intercooler gives a massive 64% increase in frontal area over stock and a correspondingly large increase in volume of 68%. Pressure drop under 1 Psi. CNC machined intercooler couplers to ensure a precision fit to the OEM Hose couplers. Supplied with all fitting hardware, and instructions no additional purchases necessary This intercooler is designed as a direct replacement for the OEM intercooler and requires no cutting of bodywork etc. This product is designed, developed and manufactured entirely in Great Britain and is covered by our Worldwide lifetime warranty. High flow cast end tanks to ensure optimum air transition for cooling efficiency Adds more aggressive styling to the front end. Provides a smoother power curve. The Forge intercooler for the F56 utilises a race specification Forge Alsus* designed air core. Dyno proven horsepower and torque gains Forge Motorsport are first to market with a full range of intercoolers for the Mini (Petrol) F56 Turbo range, 1.5 Turbo Cooper, 2.0 Turbo Cooper s and 2.0Turbo JCW. *Please note - this product does not fit the 2017 JCW cabriolet* Please look through the front grill to ascertain which cooler you need. The FMINT8 has 7 tubes the FMINTMF56 has 11 FMINT8 Or FMINTMF56                                                                                                                                                                                                                      Fitment of the core is involved but straightforward using the instructions that we provide, together with a full fitting kit. No cutting is required, this core simply replaces the original.     PLEASE NOTE: THIS WILL NOT FIT THE JCW MODEL.  FOR OUR JCW INTERCOOLER PLEASE VIEW FMINT7   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Developed from our direct involvement with the Mini Challenge series, Forge is proud to release an oil cooler adapter plate for the BMW Mini B48 engine found in the Mini Cooper S and JCW models (2013-2015). This kit allows the fitment of an external oil cooler in location of your choice, ideal if you are preparing a track or racecar that is using non-standard bodywork or mounting points.  In the Box:1x Billet Aluminium adapter plate1x Plug bolt1x Copper washer2x Adapters M22 to AN-102x Bonded washers *FMOC7 replaces the BMW OEM part P/n: 11428585236   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

As the preferred and official supplier of intercoolers to Mini Challenge, we are proud to present our intercooler for the Mini JCW F56 Chassis (2014-on). As the originators of the stepped core design way back in 2006, we were best placed within the market to call on our vast expertise in order to deliver a direct fit intercooler that would enhance the performance potential of the BMW Group 2.0 petrol turbo engine. Our core offers a 31% increase in frontal area over stock (BMW Part no.17517617600) and a correspondingly large increase in volume of 41%. Our end tanks are cast aluminium, made from 3D printed prototypes that we manufactured ourselves in our dedicated R&D facility in Gloucester, UK. The bar and plate design we have used comes after months of testing different core designs and opting for the core with best internal and external airflow. Official supplier to Mini Challenge The Forge F56 JCW intercooler gives a respectable 31% increase in frontal area over stock and a correspondingly large increase in volume of 41% The Forge F56 JCW Intercooler leaves the opposition behind yet again being the first to market The Forge development team have used Solidworks software to improve the OEM end tank design, making the Forge cast version a much freer flowing and efficient unit Testing and flow analysis has made this product a clear market leader Pressure drop under 1 Psi. This product is designed, developed and manufactured entirely in Great Britain and is covered by our lifetime warranty. Click here to find out about information and care for your Forge Motorsport cooling product. *Please note - this product does not fit the 2017 JCW cabriolet*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This induction kit has been developed to fit Mini (Generation 3) vehicles fitted with a Bosch intake sensor part Number: 0 281 006 597.  Before purchasing this item please use the photo guide on this page to correctly identify the intake sensor fitted to your vehicle. Forge Motorsport have been at the forefront of Mini tuning since 2006, and proud sponsor of the Mini Challenge  in the UK which sees our performance parts fitted to both the R56 and F56 generations of Mini, across the entire grid. The intake itself features a bespoke aluminum heat shield, which doubles as a scoop to direct air from the cold air inlet on the slam panel, and it picks up on the stock mounting locations with rubber grommets to reduce vibration and noise. Take a look at our video to see the dyno test results and an impressive 10 BHP gain. The pipe to the filter is hand fabricated and features a precision machined MAF boss so that the cars original MAF can simply be bolted on to the new intake. The filter is manufactured to Forge’s specifications by Pipercross. Washable and reusable design. Layered multi-density foam technology. Designed and manufactured in Great Britain.  Improvement in engine power and torque with superior engine protection from dirt and dust ingress. Designed to flow stronger for longer. If you have the below sensor, this part will fit your vehicle. If you have the below sensor, this part will not fit your vehicle. Please purchase FMINDF56 Finally, the intake scoop and hard pipe are finished in hard-wearing crackle black powder coat to give an OEM style finish. Fitting is very straightforward, requires no cutting or modification to the vehicle so it can easily be removed if needs be, and can be completed in 20-30 minutes. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Please Note: This kit does not fit the 2018 model Mini F56 Cooper, Cooper S & JCW. Forge Motorsport have been at the forefront of Mini tuning since 2006, and proud sponsor of the Mini Challenge (www.minichallenge.co.uk)  in the UK which sees our performance parts fitted to both the R56 and F56 generations of Mini, across the entire grid. The Forge Motorsport intake for the latest generation of Mini (chassis F54, F55 and F56) has been developed specifically for the 2.0 petrol engine found in the Cooper S and Cooper JCW, though it will also fit the Cooper 1.5 petrol, as BMW use the same airbox from the factory. The intake itself features a bespoke aluminium heat shield which doubles as a scoop to direct air from the cold air inlet on the slam panel, and it picks up on the stock mounting locations with rubber grommets to reduce vibration and noise. Take a look at our video to see the dyno test results and an impressive 10 BHP gain. The pipe to the filter is hand fabricated and features a precision machined MAF boss so that the cars original MAF can simply be bolted on to the new intake.   If you have the below sensor, this part will fit your vehicle.  If you have the below sensor, this part will not fit your vehicle. Please purchase FMINDK26 The filter is manufactured to Forge’s specifications by Pipercross (www.pipercross.net) Washable and reusable design. Layered multi-density foam technology. Designed and manufactured in Great Britain.  Improvement in engine power and torque with superior engine protection from dirt and dust ingress. Designed to flow stronger for longer.   Finally the intake scoop and hard pipe are finished in hard-wearing crackle black powder coat to give an OEM style finish. In terms of performance, we have recorded increases of 10bhp with no other changes to the car, as can be seen on the attached video. Fitting is very straightforward, requires no cutting or modification to the vehicle so it can easily be removed if needs be, and can be completed in 20-30 minutes. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a replacement for OEM part number 17517617597 As the preferred and official supplier of to www.minichallenge.co.uk Forge Motorsport is proud to present our for the Mini Cooper 1.5 Turbo F56 Chassis. Our core offers a 123% increase in frontal area over stock (BMW Part no 17517617597). As the originators of the stepped core design way back in 2006, Forge Motorsport is best placed within the market to call on our vast expertise in order to deliver a direct fit that would enhance the performance potential of the BMW Group 1.5 Turbo 3 cylinder engine. Our end tanks are die cast in aluminium for improved internal flow characteristics, developed from 3D printed prototypes that we manufactured in-house at our dedicated R&D facility in Gloucester, UK. The bar and plate core design we have used comes after months of testing different core designs and opting for the core with of internal, external airflow and heat transfer characteristics. Please look through the front grill to ascertain which cooler you need. The FMINT8 has 7 tubes the FMINTMF56 has 11 FMINT8 Or FMINTMF56 Official supplier to www.minichallenge.co.uk The Forge F56 JCW gives a respectable 123% increase in frontal area. CNC machined couplers to ensure a precision fit to the OEM Hose couplers. Supplied with all fitting hardware, no additional purchases necessary This is designed as a direct replacement for the OEM and requires no cutting of bodywork etc. This product is designed, developed and manufactured entirely in Great Britain and is covered by our Worldwide lifetime warranty. Again Forge Motorsport are first to market with a full range of for the Mini (Petrol) F56 Turbo range, 1.5 Turbo Cooper, 2.0 Turbo Cooper s and 2.0Turbo JCW.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less