Performance - Mini Cooper S R56 JCW

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Mini Cooper S performance exhaust is made in 2.5"/63.5mm pipework and fits from the turbo to the centre exhaust to replace the standard catalyst. The sports cat exhaust option will enable you to pass a UK MOT emissions test or police road side checks. The de-cat sports exhaust option is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. All relevant fittings and gaskets are supplied (excluding turbo gasket). åÊ

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Mini Cooper S performance exhaust is made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note. Tailpipes - Twin 3.5" (88.9mm). All relevant fittings and gaskets are supplied. Some of the fitted images may show the resonated option. Media Example of Mini Cooper S sports exhaust (Cat back - Resonated). Example of Mini Cooper S sports exhaust (Cat-back - Non-resonated). Example of Mini Cooper S sports exhaust (Cat back - Non Resonated). Example of Mini Cooper S sports exhaust (Cat-back - Non-resonated).

Read more less

Scorpion Exhausts Mini Resonated cat-back system Fits Years 2007 to 2014 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Constructed from premium grade 304 stainless steel, the new cat back systems have been developed in partnership with the increasingly popular Mini Challenge series as a direct replacement of the more restrictive OEM systems. The non-resonated R56, R57, R58 & R59 system features 70mm pipework, a non-resonated centre section, acoustically refined rear silencer and can be tailored with your choice of tailpipe. We currently offer 90mm Daytona polished, Daytona black ceramic, Ascari carbon-fibre and Monaco polished or black ceramic tailpipes. The new professionally hand-built systems have been designed to improve on power by increasing gas flow and perfectly balancing back pressure. As well as advancing power, drivers will notice a sharper throttle response. With only the highest quality materials used in development and motorsport-based knowledge built from over 20 years’ experience in high-end race series, the cat back systems emit a stunning exhaust tone that is deeper than the original and emits a of sound pure quality. Both options fit with the OEM and Scorpion downpipe. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMN011CF Product Type Cat-Back Resonated Resonated Fitment Years 2007 - 2014 Fits To OEM / Scorpion Model Fitment Cooper S R56 / R57 / R58 / R59 Pipe Diameter 70mm/2.75" * Tailpipe Ascari Tailpipe Diameter 90mm Shipping Dimensions 91cm x 81cm x 31cm

Read more less

Scorpion Exhausts Mini Non-resonated GPF-back system Fits Years 2019 to 2020 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Scorpion Redpower are proud to be technical partners and joint lead sponsor of the MINI Challenge racing series which now supports the famous BTCC championship. This technical partnership follows the brands track to road technology transfer vision, everything the company gains from working with these professional racing series gets passed onto the end customer for the road and as a result of this we are pleased to release Mini Challenge exhaust options for the Cooper S inc JCW F56 GPF model (UK & European models only). Constructed from premium grade 304 stainless steel, the new GPF-back system has been designed in partnership with the increasingly popular Mini Challenge series as a direct replacement of the more restrictive OEM systems. The F56 GPF back non-resonated exhaust is made from 76mm/3" pipework and comes with 90mm twin STW polished tailpipes. Also, to compliment the system we have developed resonated or non-resonated GPF delete pipes. The new precision hand-built systems have been designed to improve power by increasing gas flow and perfectly balancing back pressure. As well as increasing power, buyers will notice a sharper throttle response. With high quality materials used in development and motorsport-based knowledge built from over 20 years’ experience in high-end race series. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMNS018CF Product Type GPF-Back Resonated Non-resonated Fitment Years 2019 - 2022 Fits To OEM / Scorpion Model Fitment Cooper S F56 GPF MODEL Pipe Diameter 70mm/2.75" * Tailpipe Ascari Shipping Dimensions 90cm x 78cm x 26cm Notes OE System requires cutting. Fits to John Cooper Works models. OEM Scorpion Change Weight Difference 14.2 KG 10.2 KG -4 KG

Read more less

Scorpion Exhausts Mini One/Cooper R56 1.4 & 1.6 Resonated cat-back system Fits Years 2007 to 2014 Fits to OEM Only Pipe Diameter 63.5mm/2.5 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Here at Scorpion Redpower we have updated our popular cat-back exhaust system for Mini Cooper S R56. The redeveloped system is now constructed from a higher flowing 70mm/2.75” pipework. This improved flow allows for the engine to perform greater than before as well as enhancing the tantalising soundtrack. Customers can select resonated or non-resonated cat-back systems with their choice of 90mm Carbon Ascari, Daytona or Monaco tailpipes, polished and black ceramic finishes to personalise the aesthetics of their system. Scorpion Exhausts are proud technical partners of the MINI CHALLENGE race series, the new 70mm exhaust system has been developed side by side with the latest Scorpion race system that is featured on the cars in the series. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMN006 Product Type Cat-Back Resonated Resonated Fitment Years 2007 - 2014 Fits To OEM Only Model Fitment R56 Pipe Diameter 63.5mm/2.5" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 125cm x 60cm x 28cm

Read more less

Scorpion Exhausts Mini One/Cooper R56 1.4 & 1.6 Rear silencer only Fits Years 2007 to 2014 Fits to OEM Only Pipe Diameter 63.5mm/2.5 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Here at Scorpion Redpower we have updated our popular cat-back exhaust system for Mini Cooper S R56. The redeveloped system is now constructed from a higher flowing 70mm/2.75” pipework. This improved flow allows for the engine to perform greater than before as well as enhancing the tantalising soundtrack. Customers can select resonated or non-resonated cat-back systems with their choice of 90mm Carbon Ascari, Daytona or Monaco tailpipes, polished and black ceramic finishes to personalise the aesthetics of their system. Scorpion Exhausts are proud technical partners of the MINI CHALLENGE race series, the new 70mm exhaust system has been developed side by side with the latest Scorpion race system that is featured on the cars in the series. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMNB006 Product Type Rear Silencer Fitment Years 2007 - 2014 Fits To OEM Only Model Fitment R56 Pipe Diameter 63.5mm/2.5" * Tailpipe Imola Tailpipe Diameter 90mm Shipping Dimensions 119cm x 60cm x 28cm

Read more less

Scorpion Exhausts Mini One/Cooper R56 1.4 & 1.6 Non-resonated cat-back system Fits Years 2007 to 2014 Fits to OEM Only Pipe Diameter 63.5mm/2.5 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Here at Scorpion Redpower we have updated our popular cat-back exhaust system for Mini Cooper S R56. The redeveloped system is now constructed from a higher flowing 70mm/2.75” pipework. This improved flow allows for the engine to perform greater than before as well as enhancing the tantalising soundtrack. Customers can select resonated or non-resonated cat-back systems with their choice of 90mm Carbon Ascari, Daytona or Monaco tailpipes, polished and black ceramic finishes to personalise the aesthetics of their system. Scorpion Exhausts are proud technical partners of the MINI CHALLENGE race series, the new 70mm exhaust system has been developed side by side with the latest Scorpion race system that is featured on the cars in the series. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMNS006 Product Type Cat-Back Resonated Non-resonated Fitment Years 2007 - 2014 Fits To OEM Only Model Fitment R56 Pipe Diameter 63.5mm/2.5" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 125cm x 60cm x 28cm

Read more less

Scorpion Exhausts Mini Cooper S R56 / R57 / R58 / R59 Resonated Mini Challenge cat-back system Fits Years 2007 to 2014 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Scorpion Redpower are proud to be technical partners and joint lead sponsor of the MINI Challenge racing series which now supports the famous BTCC championship. This technical partnership follows the brands track to road technology transfer vision, everything the company gains from working with the professional racing series gets passed onto the end customer for the road. As a result of this we are pleased to announce the release of Mini Challenge exhaust options for the Cooper S R56, R57, R58, R59 & F56 none GPF model. Constructed from premium grade 304 stainless steel, the new cat back systems have been developed in partnership with the increasingly popular Mini Challenge series as a direct replacement of the more restrictive OEM systems. The non-resonated R56, R57, R58 & R59 system features 70mm pipework, a non-resonated centre section, acoustically refined rear silencer and 90mm twin polished tailpipes. The new professionally hand-built systems have been designed to improve on power by increasing gas flow and perfectly balancing back pressure. As well as advancing power, drivers will notice a sharper throttle response. With only the highest quality materials used in development and motorsport-based knowledge built from over 20 years’ experience in high-end race series, the cat back systems emit a stunning exhaust tone that is deeper than the original and emits a of sound pure quality. Both options fit with the OEM and Scorpion downpipe.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle.

Read more less

Scorpion Exhausts Mini Cooper S R56 / R57 / R58 / R59 Resonated cat-back system Fits Years 2007 to 2014 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Constructed from premium grade 304 stainless steel, the new cat back systems have been developed in partnership with the increasingly popular Mini Challenge series as a direct replacement of the more restrictive OEM systems. The non-resonated R56, R57, R58 & R59 system features 70mm pipework, a non-resonated centre section, acoustically refined rear silencer and can be tailored with your choice of tailpipe. We currently offer 90mm Daytona polished, Daytona black ceramic, Ascari carbon-fibre and Monaco polished or black ceramic tailpipes. The new professionally hand-built systems have been designed to improve on power by increasing gas flow and perfectly balancing back pressure. As well as advancing power, drivers will notice a sharper throttle response. With only the highest quality materials used in development and motorsport-based knowledge built from over 20 years’ experience in high-end race series, the cat back systems emit a stunning exhaust tone that is deeper than the original and emits a of sound pure quality. Both options fit with the OEM and Scorpion downpipe. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMN011MC Product Type Cat-Back Resonated Resonated Fitment Years 2007 - 2014 Fits To OEM / Scorpion Model Fitment Cooper S R56 / R57 / R58 / R599 Pipe Diameter 70mm/2.75" * Tailpipe Monaco (twin) Tailpipe Diameter 90 x 76mm Shipping Dimensions 90cm x 78cm x 26cm

Read more less

Scorpion Exhausts Mini Cooper S R56 / R57 / R58 / R59 Resonated cat-back system Fits Years 2007 to 2014 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Constructed from premium grade 304 stainless steel, the new cat back systems have been developed in partnership with the increasingly popular Mini Challenge series as a direct replacement of the more restrictive OEM systems. The non-resonated R56, R57, R58 & R59 system features 70mm pipework, a non-resonated centre section, acoustically refined rear silencer and can be tailored with your choice of tailpipe. We currently offer 90mm Daytona polished, Daytona black ceramic, Ascari carbon-fibre and Monaco polished or black ceramic tailpipes. The new professionally hand-built systems have been designed to improve on power by increasing gas flow and perfectly balancing back pressure. As well as advancing power, drivers will notice a sharper throttle response. With only the highest quality materials used in development and motorsport-based knowledge built from over 20 years’ experience in high-end race series, the cat back systems emit a stunning exhaust tone that is deeper than the original and emits a of sound pure quality. Both options fit with the OEM and Scorpion downpipe. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMN011M Product Type Cat-Back Resonated Resonated Fitment Years 2007 - 2014 Fits To OEM / Scorpion Model Fitment Cooper S R56 / R57 / R58 / R59 Pipe Diameter 70mm/2.75" * Tailpipe Monaco (twin) Tailpipe Diameter 90 x 76mm Shipping Dimensions 90cm x 78cm x 26cm

Read more less

Scorpion Exhausts Mini Cooper S R56 / R57 / R58 / R59 Resonated cat-back system Fits Years 2007 to 2014 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 Following its launch in 1959 the classic Mini was soon on its way to becoming a global icon especially after partnering with Cooper in the early 60’s to develop the fabled Cooper & Cooper S variants. Not long after the Cooper S’s release it was entered in the Monte Carlo Rallye which sensationally it won in 1964 & 65. Production of the classic Mini continued until 2000 when the last one rolled off the production line however this was swiftly followed by the new generation BMW Mini which launched in the same year. Scorpion have been producing performance exhausts for the classic and new generation Mini’s for over 30 years, so it was natural that we became chief technical partner with the increasingly popular Mini Challenge race series ensuring true track to road technology transfer for our products.  Constructed from premium grade 304 stainless steel, the new cat back systems have been developed in partnership with the increasingly popular Mini Challenge series as a direct replacement of the more restrictive OEM systems. The non-resonated R56, R57, R58 & R59 system features 70mm pipework, a non-resonated centre section, acoustically refined rear silencer and can be tailored with your choice of tailpipe. We currently offer 90mm Daytona polished, Daytona black ceramic, Ascari carbon-fibre and Monaco polished or black ceramic tailpipes. The new professionally hand-built systems have been designed to improve on power by increasing gas flow and perfectly balancing back pressure. As well as advancing power, drivers will notice a sharper throttle response. With only the highest quality materials used in development and motorsport-based knowledge built from over 20 years’ experience in high-end race series, the cat back systems emit a stunning exhaust tone that is deeper than the original and emits a of sound pure quality. Both options fit with the OEM and Scorpion downpipe. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SMN011C Product Type Cat-Back Resonated Resonated Fitment Years 2007 - 2014 Fits To OEM / Scorpion Model Fitment Cooper S R56 / R57 / R58 / R59 Pipe Diameter 70mm/2.75" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 90cm x 78cm x 26cm

Read more less