Performance - MK2 Focus All Models

Currently made to order, please allow 2-3 weeks before dispatch. AutoSpecialists Design extended wheel arches for the Focus ST 225 (Pre-Facelift) Suitable for the Focus MK2 ST 225 Pre-Facelift to fit with standard front bumpers. These arches are finished in a very high standard and come finished in a gel coating. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  They can be fitted without cutting existing arches, but depending how the car sits depends on the work needed. (Without cutting existing arches, you may not be able to sit as low as you want.) Please note: Will fit Focus ST MK2 PRE-FACELIFT 3 door ONLY. Will not currently fit the 5 door model. Registered Design Right number 6016415

Read more less

Tuning levels on the Focus RS & ST have pushed the standard Ford oil filter housing to its limit, with the fagile diaphragm inside these housings splitting and also leaking due to the clip on design, a upgraded breather system was required, the AIRTEC Motorsport two-piece breather kit ticks all the boxes and more... The AIRTEC Motorsport two-piece breather kit includes the following: 1 x Modified & Baffled Ford oil filter housing, includes new oil filter element and oil seals for no fuss fitting 1 x AIRTEC Motorsport oil separator with billet mounting block and laser cut fitting washer that also doubles up as a template when drilling to attach separator to battery tray 5 x Pro Hoses oil resistant fluorosilicon lined hoses, custom made to fit your engine bay, far superior fitting than straight hoses and available in various colours to match your engine bay. Complete with full stainless steel chunky jubilee clips, very minor trimming of hoses may be required.  1 x Mini breather and alloy joiner, this attaches to bottom of oil separator hose which runs down back of engine and secures to the gearbox with a modified stainless 'P' clip, its positioned so any engine fumes exit underneath the floor pan   Exchange - we require your old oil filter housing before sending 2 piece breather kit. Once you have purchased, a kit will be allocated for you, when we have received your old ford oil filter housing we can send your new 2 piece AS breather kit Outright - you will receive full kit & if you wish to return your old oil filter housing we will refund you £149. This is good for international customers that can't send their old unit back & customers that wish to fit first and then return after installation Other colour hoses are available please state when ordering Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)

Read more less

As now fitted to our very popular AIRTEC manifolds. The original brake servo pipe measures 12.5mm but most upgrade inlet manifolds are fitted with a 12mm push fitting, this make the pipe too tight and nearly impossible to remove, the metal 12.5mm push fitting upgrade fits perfectly and easy to install. A new brake servo pipe is £100+ and a our upgrade push fit is only £8.99. Fits most upgraded Inlet manifolds, thread is 3/8 BSP

Read more less

IWG75 Ford Focus ST / XR5 2.5L Turbo 7psi Ford Focus ST Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part, the IWG is easy to install and requires no special tools or fabrication. We’ve taken the proven technology from our WG38, 40 and 45mm External Wastegates and applied it to the Internal Wastegate Actuator. Features:– Silicone diaphragm with Nomex reinforcement to withstand high temperatures.– High grade, billet aluminium construction.– Stainless steel rods and connecting clevis for corrosion resistance.– Locking Collar design cap allows for quick spring changes (Options from 3psi to 26psi available).– AIRTEC Branded product Ideal for use with any Turbosmart boost controller. Please note: Pictures are library pictures and may not relate to actual product. AIRTEC part no: TS-0941-1010

Read more less

Focus ST Full ECU cover for cold feed Air filter kits. Polished finish. Covers up old ECU & also act's as a bracket for the ECU.  Comes with high voltage warning logo & information logo. Made from stainless steel, not alloy like other cheap over priced covers!

Read more less

AIRTEC Motorsport Focus Mk2 Downpipe & De-cat package. Downpipe De-cat Gaskets Bolts Made to a high quality standard and all tubing is finished in brushed stainless steel. Designed and finished in the UK *This is a universal fitting product proven to give significant power gains as well as increased pops and bangs due to an improved flow of exhaust gases.* Expect more popping & deeper aggressive exhaust sound with a de-cat fitted. Gain 10bhp + (depends on spec of your car) 3″ de-cat & downpipe Please note: De-cat removes the standard catalytic converter and will not pass a UK MOT. Must be fitted with an aftermarket exhaust system We recommend this to be used with Stage 2 (ECU Software) but can be used with a standard car Manufactured from T304 grade stainless steel tube. Formed using the finest mandrel bending machines. AIRTEC part no: ATEXHFO2

Read more less

Focus ST225 Group A Cold Air Feed which is designed to work with all Group A Open filters. Supplies a cold air feed directly into the Group A Filter Improving and maximising the airflow and performance. The cold air feed comes with Cold feed guide which sits just below the filter securing the trunking. Each kit comes with a 780mm piece of ducting, 1 base plate with attached ram pipe and all required bolts and fixings. PLEASE NOTE: Silver finish is for illustrative purposes only.

Read more less

The 2.5" big boost pipe kit is a must for all remapped RSs, Everything you need is included in the kit. Features: Hot side (turbo to intercooler) is made from 2.5" light-weight alloy and connected with 5 ply silicone hose joiners. NEW! Now comes with 70mm coldside hose to fit standard size throttle body expanding up to 70mmPlease Note: This is a Symposer Delete Item Will fit With the following intercoolers AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5" hard pipe upgrade removes Ford's 2.0" restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increases over the standard Ford pipes and these gains were achieved by simply bolting on the kit.    This kit is designed for BIG BHP Focus RS' and will work best on 375bhp and over. All pipes have swaged ends to stop the pipes blowing off on BIG BHP Focus RS'.  Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay. Choose from options throttle body size:Standard Throttle Body  (63mm)Uprated Throttle Body (70mm) Fitting takes 1 - 2 hours. Please note: For Focus ST 225 - MUST Be fitted with 2.5" outlets on intercooler. Stock ST is 2".Will NOT fit Focus ST Stage 1/2 intercooler. WILL fit focus ST Stage 3 intercooler. Please Note: Pipework only available in pro-series black (not silver)

Read more less

A fixed 50/50 vented valve, the Turbosmart Shortie Kompact Dual Port valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also fit the popular Ford Ecoboost engines. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost, the new BW/KKK/Ecoboost Kompact valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve on all BorgWarner EFR, KKK and most Ecoboost turbos, the Kompact Shortie Dual Port provides better boost response and greater boost handling capability. Included with each Kompact Shortie kit is:Model specific valve, Straight and Banjo Nipples, and Mounting screws. Please note: Pictures are library pictures and may not relate to actual product.

Read more less

Small Group A style cotton air filter, to fit multiple different applications. Fits the following models: Focus Mk2 RS Stage 2 Carbon Fibre CAIS induction kit Focus Mk2 ST225 CAIS induction kit Focus Mk2 ST225 Group A induction kit Choose from AIRTEC spec cotton filter or genuine K&N replacement filter. *Please note, K&N RU-2800 will fit Focus ST225 Group A induction kit ONLY TRUMPET NOT INCLUDED

Read more less

AutoSpecialists Focus ST Carbon Fibre look Gen2 CAIS 'Cold Air Induction System' Gain 10 - 18 bhp depending on spec of your ST. 12 Month's of Proto types & testing has produced a Real Quality and Unbeatable value for money product. Our Gen1 CAIS worked great and feel it was the best value CAIS Money could buy and now we have gone that step further by making a bigger and better CAIS our New Gen2 version. Kit includes, Everything you will need to be able to fit. 'Apart from Tools' 1x CAIS canister with Carbo fibre look end section, CNC billet pipe flange fitting and Red cotton conical style filtter Element. 3x Blue,Black, Orange or Red High Pressure Silicon hoses with the highest quality 100% stainless steel jubilee clips. 1x Black Powder coated CAIS canister mounting cradle with stainless fittings 1x ECU relocation brackets, these brackets safely relocate your ECU behind the n/s/f Head light 1x Colour, Step by step fitting instuctions. Fitting should take approx 3-4 hours depending on Tools and Mechanical skill.  Slightly Deeper induction noise over Standard , Gain Power and enhance the look of your Engine bay with a AutoSpecialists Gen2 CAIS.

Read more less

AIRTEC Motorsport Downpipe includes :- Downpipe Gaskets Bolts Made to a high quality standard and all tubing is finished in brushed stainless steel. Designed and finished in the UK *This is a universal fitting product proven to give significant power gains as well as increased pops and bangs due to an improved flow of exhaust gases.* We recommend this to be used with Stage 2 (ECU Software) but can be used with a standard car Manufactured from T304 grade stainless steel tube. Formed using the finest mandrel bending machines. AIRTEC part no: ATEXHFO3

Read more less