Performance - Mustang

If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: “Keep what works, replace what doesn’t” This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of “pilot operation” in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market. Key features: TMS Technology for faster boost recovery on gearshift and during throttle modulation Improved boost holding ability Atmosphere venting for blow-off sound Retains ECU control Simple, direct bolt-on kits include everything you need to install Manufactured in Australia in accordance with ISO 9001 VTA or DV+? Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet. Why choose a VTA over a “BOV spacer”? “BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance. Why choose a VTA over a kit that includes a solenoid? Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?       VTA BLOW-OFF VALVES ARE CONSTRUCTED WITH THE SAME MATERIALS AND VALVE MECHANISM AS THE DV+, AND THEY OFFER THE EXACT SAME PERFORMANCE AND BOOST HOLDING. HOWEVER, VENTING TO ATMOSPHERE GIVES IT THE SIGNATURE BLOW-OFF SOUND, WHILST THE DV+ KEEPS THINGS QUIET. COMPETITORS' PRODUCTS FOR THE SAME VEHICLES THAT MAKE SOUND (I.E. BOV "SPACERS") TYPICALLY RETAIN THE PERFORMANCE DEFICIENCIES OF THE FACTORY DIVERTER VALVE, DELETE THE ECU CONTROL, OR REQUIRE FREQUENT MAINTENANCE AND REBUILDS. THE VTA ON THE OTHER HAND IS THE COMPLETE PACKAGE - PERFORMANCE, FIT, RELIABILITY, AND SOUND! Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet. Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications. Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.   ONLY COMPATIBLE WITH:     Ford MUSTANG MK6 (2015 AND LATER) Variant Body Style Driven Wheels Years 2.3 EcoBoost 314hp Coupé Rear Wheel Drive 2015 and later 2.3 EcoBoost 317hp Fastback Rear Wheel Drive 2015 and later 2.3 EcoBoost 317hp Convertible Rear Wheel Drive 2015 and later

Read more less

GFB's DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles. By retaining the factory ECU control and recirculating the vented air, the DV+ is a purely performance-orientated product. GFB’s DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to “pilot actuation” to ensure better performance on stock or modified engines. Furthermore, these benefits won’t cost you the Earth! Rather than throwing the entire factory diverter valve system in the bin (like other manufacturer’s “solutions”), the DV+ keeps what works and replaces what doesn’t. It retains the factory solenoid and ECU control to ensure simple installation and reliable operation. 10% faster opening, 50% faster closing than the factory diverter Retains the factory solenoid for seamless integration Replaces plastic valve parts with metal for reliability and strength on stock or modified engines Direct-fit replacement with GFB’s TMS benefits Exclusive “pilot-actuated” valve mechanism for rapid response at high boost   Related Videos: ONLY COMPATIBLE WITH: Ford C-MAX FIESTA FOCUS GALAXY GRAND C-MAX KUGA MUSTANG S-MAX TOURNEO CONNECT TRANSIT CONNECT Mercedes-Benz A-CLASS B-CLASS C-CLASS CLA E-CLASS GLA-CLASS SLC SLK Proton EXORA PREVE SUPRIMA S Volvo S60 S80 V40 V60 V70 XC60 XC70

Read more less

If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: “Keep what works, replace what doesn’t” This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of “pilot operation” in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market. Key features: TMS Technology for faster boost recovery on gearshift and during throttle modulation Improved boost holding ability Atmosphere venting for blow-off sound Retains ECU control Simple, direct bolt-on kits include everything you need to install Manufactured in Australia in accordance with ISO 9001 VTA or DV+? Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet. Why choose a VTA over a “BOV spacer”? “BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance. Why choose a VTA over a kit that includes a solenoid? Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?       VTA BLOW-OFF VALVES ARE CONSTRUCTED WITH THE SAME MATERIALS AND VALVE MECHANISM AS THE DV+, AND THEY OFFER THE EXACT SAME PERFORMANCE AND BOOST HOLDING. HOWEVER, VENTING TO ATMOSPHERE GIVES IT THE SIGNATURE BLOW-OFF SOUND, WHILST THE DV+ KEEPS THINGS QUIET. COMPETITORS' PRODUCTS FOR THE SAME VEHICLES THAT MAKE SOUND (I.E. BOV "SPACERS") TYPICALLY RETAIN THE PERFORMANCE DEFICIENCIES OF THE FACTORY DIVERTER VALVE, DELETE THE ECU CONTROL, OR REQUIRE FREQUENT MAINTENANCE AND REBUILDS. THE VTA ON THE OTHER HAND IS THE COMPLETE PACKAGE - PERFORMANCE, FIT, RELIABILITY, AND SOUND! Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet. Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications. Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.   ONLY COMPATIBLE WITH:     Ford MUSTANG MK6 (2015 AND LATER) Variant Body Style Driven Wheels Years 2.3 EcoBoost 314hp Coupé Rear Wheel Drive 2015 and later 2.3 EcoBoost 317hp Fastback Rear Wheel Drive 2015 and later 2.3 EcoBoost 317hp Convertible Rear Wheel Drive 2015 and later

Read more less

GFB's DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles. By retaining the factory ECU control and recirculating the vented air, the DV+ is a purely performance-orientated product. GFB’s DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to “pilot actuation” to ensure better performance on stock or modified engines. Furthermore, these benefits won’t cost you the Earth! Rather than throwing the entire factory diverter valve system in the bin (like other manufacturer’s “solutions”), the DV+ keeps what works and replaces what doesn’t. It retains the factory solenoid and ECU control to ensure simple installation and reliable operation. 10% faster opening, 50% faster closing than the factory diverter Retains the factory solenoid for seamless integration Replaces plastic valve parts with metal for reliability and strength on stock or modified engines Direct-fit replacement with GFB’s TMS benefits Exclusive “pilot-actuated” valve mechanism for rapid response at high boost   Related Videos: ONLY COMPATIBLE WITH: Ford C-MAX FIESTA FOCUS GALAXY GRAND C-MAX KUGA MUSTANG S-MAX TOURNEO CONNECT TRANSIT CONNECT Mercedes-Benz A-CLASS B-CLASS C-CLASS CLA E-CLASS GLA-CLASS SLC SLK Proton EXORA PREVE SUPRIMA S Volvo S60 S80 V40 V60 V70 XC60 XC70

Read more less

If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: “Keep what works, replace what doesn’t” This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of “pilot operation” in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market. Key features: TMS Technology for faster boost recovery on gearshift and during throttle modulation Improved boost holding ability Atmosphere venting for blow-off sound Retains ECU control Simple, direct bolt-on kits include everything you need to install Manufactured in Australia in accordance with ISO 9001 VTA or DV+? Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet. Why choose a VTA over a “BOV spacer”? “BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance. Why choose a VTA over a kit that includes a solenoid? Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?       VTA BLOW-OFF VALVES ARE CONSTRUCTED WITH THE SAME MATERIALS AND VALVE MECHANISM AS THE DV+, AND THEY OFFER THE EXACT SAME PERFORMANCE AND BOOST HOLDING. HOWEVER, VENTING TO ATMOSPHERE GIVES IT THE SIGNATURE BLOW-OFF SOUND, WHILST THE DV+ KEEPS THINGS QUIET. COMPETITORS' PRODUCTS FOR THE SAME VEHICLES THAT MAKE SOUND (I.E. BOV "SPACERS") TYPICALLY RETAIN THE PERFORMANCE DEFICIENCIES OF THE FACTORY DIVERTER VALVE, DELETE THE ECU CONTROL, OR REQUIRE FREQUENT MAINTENANCE AND REBUILDS. THE VTA ON THE OTHER HAND IS THE COMPLETE PACKAGE - PERFORMANCE, FIT, RELIABILITY, AND SOUND! Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet. Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications. Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.

Read more less

GFB's DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles. By retaining the factory ECU control and recirculating the vented air, the DV+ is a purely performance-orientated product. GFB’s DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to “pilot actuation” to ensure better performance on stock or modified engines. Furthermore, these benefits won’t cost you the Earth! Rather than throwing the entire factory diverter valve system in the bin (like other manufacturer’s “solutions”), the DV+ keeps what works and replaces what doesn’t. It retains the factory solenoid and ECU control to ensure simple installation and reliable operation. 10% faster opening, 50% faster closing than the factory diverter Retains the factory solenoid for seamless integration Replaces plastic valve parts with metal for reliability and strength on stock or modified engines Direct-fit replacement with GFB’s TMS benefits Exclusive “pilot-actuated” valve mechanism for rapid response at high boost   Related Videos:

Read more less

FMDV2A – Atmospheric dump valve for the 2015-on Ford Mustang 2.3 Ecoboost The Forge Motorsport atmospheric dump valve for the 2015-on Ford Mustang 2.3 Ecoboost. The stock Ford valve is now a standard electronic solenoid type which we have seen failures of on other vehicles over the past few years. Our valve solution fully integrates with the ECU so that it still thinks the original valve is connected to the car, yet when it activates the valve, you now get the traditional dump valve ‘whoosh’ accompanying your gearchanges. Also our valve is fully serviceable, and rebuildable with a stronger spring should you increase the boost pressure with a remap.       Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport turbo actuator for the Ford Mustang 2.3 Ecoboost. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACMUST23 Actuator1 x Forge Sticker This actuator is built with a green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

GFB's DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles. By retaining the factory ECU control and recirculating the vented air, the DV+ is a purely performance-orientated product. GFB’s DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to “pilot actuation” to ensure better performance on stock or modified engines. Furthermore, these benefits won’t cost you the Earth! Rather than throwing the entire factory diverter valve system in the bin (like other manufacturer’s “solutions”), the DV+ keeps what works and replaces what doesn’t. It retains the factory solenoid and ECU control to ensure simple installation and reliable operation. 10% faster opening, 50% faster closing than the factory diverter Retains the factory solenoid for seamless integration Replaces plastic valve parts with metal for reliability and strength on stock or modified engines Direct-fit replacement with GFB’s TMS benefits Exclusive “pilot-actuated” valve mechanism for rapid response at high boost   Related Videos:

Read more less

If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: “Keep what works, replace what doesn’t” This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of “pilot operation” in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market. Key features: TMS Technology for faster boost recovery on gearshift and during throttle modulation Improved boost holding ability Atmosphere venting for blow-off sound Retains ECU control Simple, direct bolt-on kits include everything you need to install Manufactured in Australia in accordance with ISO 9001 VTA or DV+? Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet. Why choose a VTA over a “BOV spacer”? “BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance. Why choose a VTA over a kit that includes a solenoid? Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?       VTA BLOW-OFF VALVES ARE CONSTRUCTED WITH THE SAME MATERIALS AND VALVE MECHANISM AS THE DV+, AND THEY OFFER THE EXACT SAME PERFORMANCE AND BOOST HOLDING. HOWEVER, VENTING TO ATMOSPHERE GIVES IT THE SIGNATURE BLOW-OFF SOUND, WHILST THE DV+ KEEPS THINGS QUIET. COMPETITORS' PRODUCTS FOR THE SAME VEHICLES THAT MAKE SOUND (I.E. BOV "SPACERS") TYPICALLY RETAIN THE PERFORMANCE DEFICIENCIES OF THE FACTORY DIVERTER VALVE, DELETE THE ECU CONTROL, OR REQUIRE FREQUENT MAINTENANCE AND REBUILDS. THE VTA ON THE OTHER HAND IS THE COMPLETE PACKAGE - PERFORMANCE, FIT, RELIABILITY, AND SOUND! Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet. Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications. Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.

Read more less