Performance - Peugeot 208 GTI

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Peugeot 208 GTI performance exhaust is made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release Cobra Sport were keen to develop a system for the 208 GTi which would match the fun and sporty feel of the car. The decision was made to manufacture the systems with 2.5̢‰âÂå� (62.5mm) mandrel bent T304 stainless steel pipework to allow for maximum gas flow and to deepen the exhaust tone. The completed exhaust systems create a much improved sound track on the 208 GTi. During the 4,000 rpm static test the sound level of the resonated cat back system increased by 3.5db to register 78.4db on the sound meter. The non resonated system takes this a step further recording a more pronounced 82.5db an increase of 8db over the standard system. Our development car was fully tested on the rolling road with the Cobra Sport cat back exhaust upgrade fitted. This testing revealed a 3.35% increase in horse power recording and impressive 154.3bhp. The testing also revealed excellent gains in torque with a 11.4% increase with the total figure jumping up to just over 200 lb-ft. Mass also reduced providing a weight saving of just over 0.5kg in comparison to its OE counterpart even with the largely increased pipework bore size. All in all these are certainly impressive results for this little car. Styling options consist of standout 3"å� twin unobtrusive slash cut tailpipes which compliment the GTI's aesthetics nicely. All the exhaust variants are designed to remove the restrictive O/E first silencer which produces a more powerful sound track and overall, providing a purposeful but unobtrusive sound quality which in no way interferes with day-to-day drivability. Unrivalled quality is the hallmark of every Cobra Sport exhaust. Each exhaust is engineered to the highest tolerances. Mandrel bending of the stainless steel tubes ensures clean airflow. Jig manufacturing and TIG welding procedures ensure great looks and a superlative finish. Matt Thomas, Sales Manager at Cobra Sport says "The cat back exhaust system has provided us with some exciting results especially in the torque gained from the 1.6 turbocharged engine. We'veåÊgiven the GTI the sound that it deserved from the factory with the deeper more pronounced exhaust tone. For those looking for a further upgrade and more aggressive sound we are offering a sports cat or de-cat front pipe replacement to turn the 208 GTI into a great hot hatch." Media Example of the Cobra Sport Peugeot 208 GTi Exhaust (Non-Resonated Cat Back)

Read more less

Scorpion Exhausts Peugeot 208 Gti 1.6T Resonated cat-back system Fits Years 2012 to 2015 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 Embrace the Peugeot tagline of “Motion & Emotion” and feel the emotional response of a tantalising Scorpion performance exhaust. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SPG022 Product Type Cat-Back Resonated Resonated Fitment Years 2012 - 2015 Fits To OEM / Scorpion Pipe Diameter 63.5mm/2.5" * Tailpipe Daytona Tailpipe Diameter 83mm Shipping Dimensions 102cm x 64cm x 37cm

Read more less

Scorpion Exhausts Peugeot 208 Gti 1.6T Non-resonated cat-back system Fits Years 2012 to 2015 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 Embrace the Peugeot tagline of “Motion & Emotion” and feel the emotional response of a tantalising Scorpion performance exhaust. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SPGS022 Product Type Cat-Back Resonated Non-resonated Fitment Years 2012 - 2015 Fits To OEM / Scorpion Pipe Diameter 63.5mm/2.5" * Tailpipe Daytona Tailpipe Diameter 83mm Shipping Dimensions 102cm x 64cm x 37cm

Read more less

Scorpion Exhausts Peugeot 208 Gti 1.6T Downpipe with high flow sports catalyst Fits Years 2012 to 2015 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 Embrace the Peugeot tagline of “Motion & Emotion” and feel the emotional response of a tantalising Scorpion performance exhaust. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SPGX022 Product Type Turbo-Downpipe Fitment Years 2012 - 2015 Fits To OEM / Scorpion Pipe Diameter 63.5mm/2.5" * Shipping Dimensions 58cm x 33cm x 16cm Notes Engine management light may be activated, Stage 2 ECU remap recommended

Read more less

Scorpion Exhausts Peugeot 208 Gti 1.6T De-cat downpipe Fits Years 2012 to 2015 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 Embrace the Peugeot tagline of “Motion & Emotion” and feel the emotional response of a tantalising Scorpion performance exhaust. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SPGC022 Product Type Turbo-Downpipe Fitment Years 2012 - 2015 Fits To OEM / Scorpion Pipe Diameter 63.5mm/2.5" * Shipping Dimensions 58cm x 33cm x 16cm Notes Engine management light may be activated, Stage 2 ECU remap recommended Closed Circuit Product Yes

Read more less

Requires a stage 2 ECU remap Must be fitted with the Milltek Sport cat-back system Part No. Description Tailpipe Pipe Diameter Race EC MSPE15 Large-bore downpipe and hi-flow sports catalyst 2.50" (63.50mm) Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Resonated (quieter). Polished Tips. EC-Approved Part No. Description Tailpipe Pipe Diameter Race EC MSCN123 Front Silencer Assembly 2.50" (63.50mm) Yes MSPE17REP Non-resonated Centre Section Yes MSPE19 Rear Silencer Assembly Yes MSVW370 x2 Polished Trim Assembly {featuring new Roll-marked Milltek Sport logo} Twin 80mm GT80 Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Requires a stage 2 ECU remap Part No. Description Tailpipe Pipe Diameter Race EC MSPE15REP Large-bore Downpipe and Decat 2.50" (63.50mm) Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

The HJS tuning ECE Downpipes are specifically designed to be fully road legal within Europe (R103 compliant) while still providing the benefits of the High Flow Sports Cat. HJS ECE Cats do not require engine ECU software upgrades and will not trigger a check engine light, ranging between 200 to 300 cells and designed to fit with the OE cat back system or Milltek Sport cat back systems.       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

Non-resonated (louder). Cerakote Black Tips Part No. Description Tailpipe Pipe Diameter Race EC MSCN123REP Non-resonated Front Section 2.50" (63.50mm) MSPE17REP Non-resonated Centre Section MSPE19 Rear Silencer Assembly MSTIP177 x2 Cerakote Black Tips {featuring new Roll-marked Milltek Sport logo} Twin 80mm GT80 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Non-resonated (louder). Titanium Tips Part No. Description Tailpipe Pipe Diameter Race EC MSCN123REP Non-resonated Front Section 2.50" (63.50mm) MSPE17REP Non-resonated Centre Section MSPE19 Rear Silencer Assembly MSTIP192 x2 Titanium Tip Assembly Twin 80mm GT80 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less