Performance - Polo MK4

The latest iteration of GFB’s feature-packed electronic boost controller now has the ability to monitor and display your engine’s air/fuel ratio in either Lambda or AFR. By connecting the analogue output of most wideband O2 controllers (i.e. Innovate LC-2, AEM UEGO etc, sold separately) to the G-Force III’s auxiliary input, you can toggle between boost pressure and air/fuel ratio display. Not only does this save you from having to install a separate AFR gauge in your car, it can also save your engine! A lean mixture at high boost can destroy an engine in seconds, and a stand-alone AFR gauge is next to useless when accelerating hard as your concentration is likely to be (and should be!) on the road in front of you. The G-Force III safeguards your engine against a lean mixture by lowering boost to the minimum setting, and visibly warning you by flashing the display lighting. Whether your car is a daily driver or an all-out track weapon, the G-Force III has the features to tailor boost to suit your needs. Set up to 6 boost presets and select on the fly, use the scramble feature for overtaking, launching, towing, or protecting the engine, and you can even customize the lighting colour to suit your interior! No other EBC on the market offers the features, control, ease of use, and value for money like the G-Force III! For boost pressures up to 50psi (3.45BAR, 345kPa) Adjust peak boost, rise rate, and closed-loop correction Display boost pressure in psi, BAR, or kPa 6 boost presets, individually programmable Unique “scramble” feature with remote switching Peak boost recall Air / Fuel Ratio display in AFR or Lambda (when connected to a wideband O2 controller) Separately adjustable overboost and lean mixture warning / boost cut Touch buttons with user selectable illumination colours Auxiliary input to switch boost presets or activate scramble ½ DIN size casing, fits standard stereo slot Supplied with MAC 3-Port Solenoid Manufactured in Australia in accordance with ISO 9001       GFB’s EBC (Electronic Boost Controller) range offers the most “bang-for-your-buck” of any EBC on the market, with features rivalling much more expensive units AND remaining incredibly easy to use. Boost control begins with a massive 50psi (3.5BAR) capability, and the 6 individually configurable presets allow for enough settings to suit all driving conditions. Presets can be selected at the press of a button or triggered remotely, and for each preset it is possible to tune the peak boost, boost rise rate, and the strength of the closed loop correction. This means you can change how much boost you have, how fast the boost comes on, and how hard the controller will correct for boost variations. Our unique “scramble” feature allows you to jump to a dedicated boost preset for a user-adjustable amount of time, and can be activated on the screen or remotely using any kind of switch, button, or programmable ECU output. The uses for this feature are limited only by your imagination – you can raise or lower boost based on time, a manual button or switch, or trigger automatically based on engine conditions. For example, use a toggle switch for high/low boost, steering wheel/gearshift button for push-to-pass, use the timer for launch control, or drop boost pressure if your oil/water temperature is high or the water/meth system runs dry. An important point of difference with GFB’s EBCs is the simple and intuitive user interface. By using capacitive touch buttons, scrolling text, and a logical menu layout, you’ll find our EBCs are a pleasure to use. You can even choose your preferred boost units and customize the button lighting colour to match your car’s dash! VNT/VGT turbos are typically found on late-model diesel engines (rarely used on petrol engines), and often the actuator can look similar to a wastegate actuator. If you are unsure of your turbo type, please consult your nearest dealer before purchasing.   Related Videos:     ONLY COMPATIBLE WITH: Audi A3 A4 TT     Citroen C4     Ford FIESTA FOCUS MONDEO MUSTANG     Holden COMMODORE     Mazda 3 6 CX-7 MX-5     Mitsubishi 3000 GT COLT ECLIPSE GTO GALANT LANCER STARION     Nissan 180 SX 200 SX 300 ZX PULSAR SKYLINE     Opel ASTRA K MOKKA / MOKKA X     Seat IBIZA LEON     Subaru FORESTER IMPREZA LEGACY     Toyota CELICA SOARER SUPRA     Vauxhall ASTRA CALIBRA CORSA INSIGNIA MOKKA / MOKKA X VX220 VECTRA Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less

Takes over where the factory regulator stops Direct fit replacement for Bosch clip in regulators More than double the flow of the factory regulator, allows increased pump capacity without having to replace the factory fuel rail Gasoline, ethanol, and methanol compatible Double layer/double reinforced diaphragms with a burst strength exceeding 1000psi Teflon co-polymer seat with stainless valve to retain fuel pressure longer after shut down Spring pre-load adjustment platform is o-ring sealed and does not leak vacuum/boost Static pressures adjustable from 1.4-5bar (20-72psi – subject to pump flow and factory return line restriction) Completely serviceable GFB’s popular and compact FX-S Fuel Pressure Regulator is now also available as a direct drop-in replacement for the common Bosch regulators that clip into the fuel rail. If you increase the performance of your engine, you need to ensure your fuel system can deliver the goods or you’re going to have a bad day! Upgrading the fuel pump is the first step, but doing this alone will usually result in excessive fuel pressure, especially at idle. This is because the factory Bosch regulators typically don’t flow enough to support larger fuel pumps, especially with turbo E85 setups that demand high fuel flow rates. Rather than replacing the entire fuel rail, or using an adaptor with a separate fuel pressure regulator, simply clipping in the FX-S 8051 will allow you to run a much larger pump setup even with the factory rail. And if you need to adjust the fuel pressure, that’s no problem - unlike the fixed-pressure Bosch regulators, the FX-S can be adjusted from 1.4bar to 5bar. Like all GFB FX regulators, the FX-S 8051 is compatible with pump gas, Ethanol, or Methanol, and also incorporates a soft Teflon valve seat (rather than metal on metal) that will always positively seal and hold fuel pressure on shut down for reliable engine startups. The double layer diaphragm has twice the reinforcing material of the single layer type used in most regulators, and as a result the burst strength exceeds 1000psi! The 1/8” NPT port can be used for a fuel pressure gauge or electronic pressure sensor, or it can simply be plugged using the port plug provided.       All GFB FX Regulators Feature: 1:1 FUEL PRESSURE RISE RATE SUITABLE FOR UNLEADED, ETHANOL, METHANOL AND DIESEL FUELS DOUBLE LAYER/DOUBLE REINFORCED DIAPHRAGMS WITH A BURST STRENGTH EXCEEDING 1000PSI TEFLON CO-POLYMER SEAT WITH STAINLESS VALVE TO RETAIN FUEL PRESSURE LONGER AFTER SHUT DOWN FULLY SEALED UPPER BOOST/VACUUM REFERENCE CHAMBER STATIC PRESSURES ADJUSTABLE FROM 28PSI TO 72PSI (2-5BAR) COMPLETELY SERVICEABLE MULTIPLE BODY PORTS ALLOW FOR A LARGE VARIETY OF SETUP OPTIONS MANUFACTURED IN AUSTRALIA IN ACCORDANCE WITH ISO 9001 GFB’s Fuel Pressure Regulators are built with the same precision, machining quality, and reliability that is the foundation of all GFB products. The compact size of the GFB FX regulators conceals a large flow capacity, and the multiple ports allow for a variety of fuel system setups including multiple rails and gauge/pressure sensor monitoring. Internally, like all GFB products you’ll find unique features and small touches that make the difference between a good product, and a great one. For example, we use a double-layer, double-reinforced diaphragm with a burst strength exceeding 1000psi (68BAR)! Unlike others that use a metal-to-metal valve seat, the FX regulators feature a replaceable soft Teflon valve seat that helps retain fuel pressure longer after the car is shut down for easier re-starting. We even went to the trouble of adding an o-ring sealed spring hat to ensure no boost/vacuum leakage through the spring adjusting screw. All FX regulators have a 1:1 fuel pressure rise rate and a base pressure range from 28-72psi (2-5BAR).   Only Compatible With:   Alfa Romeo 145 155 156 166 GTV SPIDER Audi 100 80 A2 A3 A4 A6 CABRIOLET COUPE TT Holden COMMODORE Mazda 3 6 CX-7 MX-5 Mitsubishi 3000 GT COLT GTO GALANT LANCER STARION Nissan 180 SX 200 SX 300 ZX GT-R PULSAR SKYLINE Seat IBIZA LEON Subaru FORESTER IMPREZA LIBERTY Toyota CELICA SOARER SUPRA Volkswagen BORA GOLF PASSAT POLO

Read more less

All the Performance With or Without the Noise! GFB’s Mach 2 utilises GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce. With its single venting outlet, the Mach 2 is configured from the factory for full recirculation (i.e. plumb back, diverter, bypass) venting for the performance-minded who just want the benefits without the sound. Single venting outlet, factory configured for full recirculating operation Configure for full atmosphere venting with separate atmosphere conversion kit TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001   Complete Range of Fitment Options The Mach 2 direct bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. ONLY COMPATIBLE WITH:     Audi A3 A4 TT     Ford FOCUS     Saab 9-3 9-3 CONVERTIBLE 9-5 Seat IBIZA LEON     Volkswagen BORA GOLF NEW BEETLE PASSAT POLO  

Read more less

All the Performance with the Noise! The Hybrid valve is back! In 1999, GFB’s first Hybrid valve pioneered the dual port design, which was so successful the technology has since been adopted by most other brands. By “staging” the two venting outlets, at low valve lifts most of the air is recirculated. As the car is driven harder, the valve opens further and more of the atmosphere venting port is exposed for a louder sound. As a benefit, this system makes it possible to use these valves on cars with sensitive airflow meters that often suffer issues such as backfiring and/or stalling, whilst still achieving the signature blow-off sound. Dual staged venting outlets, can be configured for full recirc, 50/50, or full atmosphere operation using plugs provided TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001   Complete Range of Fitment Options The Hybrid direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. ONLY COMPATIBLE WITH:       Audi A3 A4 TT     Ford FOCUS     Saab 9-3 9-3 CONVERTIBLE 9-5     Seat IBIZA LEON     Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less

All the performance with or without the noise! If cars like yours typically suffer issues such as backfiring and stalling when using a fixed-ratio atmosphere-venting BOV, the Respons can help. By adjusting the venting bias to suit the car you can achieve a blow-off sound without having to put up with the issues. Like all GFB valves, the Respons utilises GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce. How GFB’s patented venting bias adjustment works Twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed.This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between. Complete Range of Fitment Options The Respons direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. Performance AND sound without compromise! Patented Venting Bias Adjustment system - can be infinitely adjusted between full recirc (silent) and full atmosphere (loud) Change the venting bias simply by twisting the adjustment ring TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001     Related Videos:     ONLY COMPATIBLE WITH:     Audi A3 A4 TT       Ford FOCUS       Seat IBIZA LEON       Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less

Go on, admit it. There are times you wish you could have that signature turbo blow off sound, but you’re not prepared to listen to it all the time. GFB’s Deceptor Pro II delivers just what you need – the ability to control how loud your BOV sound is, from the driver’s seat. To top it off, if your car typically suffers issues such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. Complete range of fitment options The Deceptor Pro II direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. ONLY COMPATIBLE WITH:     Audi A3 A4 TT       Ford FOCUS       Seat IBIZA LEON       Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less

European manufacturers are pushing their engines to the limit. Get a DV to match. GFB's DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles. By retaining the factory ECU control and recirculating the vented air, the DV+ is a purely performance-orientated product. GFB’s DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to “pilot actuation” to ensure better performance on stock or modified engines. Furthermore, these benefits won’t cost you the Earth! Rather than throwing the entire factory diverter valve system in the bin (like other manufacturer’s “solutions”), the DV+ keeps what works and replaces what doesn’t. It retains the factory solenoid and ECU control to ensure simple installation and reliable operation. 10% faster opening, 50% faster closing than the factory diverter Retains the factory solenoid for seamless integration Replaces plastic valve parts with metal for reliability and strength on stock or modified engines Direct-fit replacement with GFB’s TMS benefits Exclusive “pilot-actuated” valve mechanism for rapid response at high boost   Related Videos:     ONLY COMPATIBLE WITH:       Audi A3 A4 TT       Saab 9-3 9-3 CONVERTIBLE 9-5       Seat IBIZA LEON       Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less

Suitable for T9107, T9111, T9112 (2 required) and T9125       You asked, we delivered. Many times we have been asked for a replacement trumpet that gives a different sound, and here it is.     ONLY COMPATIBLE WITH:    Audi A3 A4 TT       Seat IBIZA LEON       Subaru FORESTER       Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less