Performance - RS3 8V

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Cat-back - Non-Resonated with Polished Trims (170x107mm) (Non-OPF/GPF Models Only) Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU770 Cat-back-Cat Back Non-Resonated with Polished Trims 76.2 3 No No Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Scorpion Exhausts release a new turbo downpipe to suit the Audi RS3 8V Sportback & Saloon plus Audi TT RS Mk3 GPF models The innovative new turbo downpipe is constructed from large bore 100mm & 76mm pipework and has been specifically designed for tuners seeking to maximise their vehicles performance. With performance in mind, the high flow design allows the exit of hot gas much quicker when comparing it to the more restrictive OEM downpipe.  The kit is formed of three main parts, the 100mm turbo downpipe, centre section which can be selected in two formats, a de-cat or 200 cell sports cat and the rear Y piece which connects to the OEM or Scorpion GPF-back system with the supplied fitting kit. (Fitting the downpipe removes the OE Catalyst & GPF. Engine light will illuminate when installed, remap recommended when installing either option). One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  Manufactured from premium 80mm/3.14” T304 Stainless Steel the RS3 system is offered for both GPF and non-GPF cars. When fitting to a non GPF model or one with a sports/de-cat downpipe we would recommend using our resonated system to prevent in cabin drone. When fitting to a GPF model we would recommend using our non-resonated system to bring the cars audio track to life. To compliment the Audi’s premium sporty looks we have designed our Carbon Ascari Evo tailpipes to sit precisely in the rear valance. Both systems come with the option of valved or non-valved to allow for a driver’s personalised sound. Valved - which uses the original motor and can be operated by the driver with the drive mode select button inside the car. The non-valved option deletes the valve completely for a continuous sportier tone. Our system gives the car a measurable reduction in weight when compared to the OE system, this is an improvement most drivers will find hard to rebuff. At the rear end of the system is an acoustically developed silencer to ensure zero drone throughout the rev range. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUX089 Product Type Turbo-Downpipe Fitment Years 2019 - 2022 Fits To OEM / Scorpion Model Fitment RS3 8V Sportback / RS3 8V Saloon / TTRS MK3 GPF Models Pipe Diameter 100mm/4" * Shipping Dimensions 73cm x 32cm x 32cm Closed Circuit Product Yes OEM Scorpion Change Weight Difference 13.5 KG 7.8 KG -5.7 KG

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi RS3 performance exhaust is made in 2.5"/63.5mm bore pipework and replaces the secondary catalyst (Cat Bypass). This de-cat sports exhaust is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. All relevant fittings and gaskets are supplied. Media Example of the Audi RS3 8V Performance Exhausts (Secondary Catalyst Delete Pipes).

Read more less

Direnza Performance Audi RS3 Decat Downpipe, manufactured from T304 grade, brushed stainless steel. Handcrafted by our specialist engineering team to ensure high quality & accurate fitment. Features back purged TIG welding and feature CNC-machines flanges for strength and durability. Our new performance downpipe eliminates the highly restrictive OEM catalytic converter, allowing exhaust gasses to flow more freely. Engineered to unleash untapped engine performance, improve throttle response & enhance sound. May require bypass software on vehicle ECU. 4″ Diameter to 2x 2.5″ T304 Stainless Steel TIG Welded Back Purged Replaces restrictive OE catalytic converter Improved throttle response Faster turbo spool Significantly improve engine performance when matched with a remap Fitment Audi RS3 8V Quattro 2.5 TFSI 2015 – 2020Audi RS3 8Y Quattro 2.5 TFSI 2020 – Present(Non-GPF models only) System Bore (mm) 101 – 2×63

Read more less

Direnza Performance Audi RS3 Decat Downpipe, manufactured from T304 grade, brushed stainless steel. Handcrafted by our specialist engineering team to ensure high quality & accurate fitment. Features back purged TIG welding and feature CNC-machines flanges for strength and durability. Our new performance downpipe eliminates the highly restrictive OEM catalytic converter, allowing exhaust gasses to flow more freely. Engineered to unleash untapped engine performance, improve throttle response & enhance sound. May require bypass software on vehicle ECU.   4″ Diameter to 2x 2.5″ T304 Stainless Steel TIG Welded Back Purged Replaces restrictive OE catalytic converter Improved throttle response Faster turbo spool Significantly improve engine performance when matched with a remap Fitment Audi RS3 8V Quattro 2.5 TFSI 2015 – 2020Audi RS3 8Y Quattro 2.5 TFSI 2020 – Present(Non-GPF models only) System Bore (mm) 101 – 2×63

Read more less

Cat Back Resonated (EC Approved) with Burnt Titanium Oval Trims Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU802 Cat Back Resonated (EC Approved) with Burnt Titanium Oval Trims 76.2 3 No Yes Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

GPF Back Exhaust Non-Resonated with Titanium Oval Trims Part No. Description Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXAU799 GPF Back Exhaust - Non Resonated 76.2 3 No No Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non-Resonated with Polished Oval Trims (170x107mm) (Non-OPF/GPF Models Only) Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU741 Cat Back Non-Resonated with Polished Oval Trims 76.2 3 No No Yes   Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non-Resonated with Cerakote Black Oval Trims (170x107mm) (Non-OPF/GPF Models Only) Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU740 Cat Back Non-Resonated with Cerakote Black Oval Trims 76.2 3 No No Yes   Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat Back Non-Resonated with Burnt Titanium Oval Trims Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU800 Cat Back Non-Resonated with Burnt Titanium Oval Trims 76.2 3 No No Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

80mm Resonated Cat Back with Titanium Trims - EC Approval Coming Soon Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU891 80mm Resonated Cat Back with Titanium Trims - EC Approval Coming Soon 80 3.15 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less