Performance - Seat Leon MK2

FRONT SPLITTER SEAT LEON MK2 CUPRA / FR fits: Seat Leon mk2 CUPRA / FR (FACELIFT) 2009-2012   COMPLETE SET CONTAINS:    SPLITTER /FRONT BUMPER LIP SPOILER  Mounting kit  Mounting manual   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability. Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.  This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

REVO AIR INTERCOOLER 1.8/2.0 TFSI The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow thus decreasing turbulence and increasing airspeed into the bespoke bar and plate core. These features enhance charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures even compared to the Audi S3 (8P) cast aluminium intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & Plate Core Design Fully Cast End Tanks OEM Fitment 51% Increased Core Volume over a standard cooler 21% Increased Core Volume over an OE S3 cooler Lower Intake Temperatures INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Designed from the ground up, the Revo Intercooler has a much larger core volume than the OEM part and offers perfect fitment, improving cooling by utilising the full volume of the stock location space as well as cold ambient air from the front of the vehicle. END TANK DESIGN End tanks play an important part in managing pressure drop and work in harmony with the core to promote airflow, the stock ones are inefficiently designed and create turbulent air in corners. These sections create a naturally small cross-sectional flow area, slowing charge air and increasing pressure drop. The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core by removing these turbulent pocket areas found in the OE design. Coupled with a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions from turbulent air pockets found in the OE intercooler. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR AND PLATE CORE Designed with a bar and plate core to maximise the efficiency of heat transfer and minimise flow resistance, the Revo Intercooler easily outperforms similar tube and fin alternatives in both aspects. The Revo Intercooler goes a step farther: featuring carefully specified fin sizing and geometry to further optimise the balance between air cooling and flow restriction. The ambient core side utilises shorter fins with specially designed louvres to slow ambient air passing through the core, which improves heat transfer. While the charge core side features an offset internal fin design to balance surface area and air resistance to aid cooling ability and minimise pressure drop.   SILICONE HOSES Supplied with stronger oil resistant silicone hoses, the Revo Intercooler can be installed using the stock pipework or recommended Revo Intercooler pipework (Coming soon). The internal diameter of each silicone is precisely matched to the inner diameter of the ribbed intercooler inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components.   BRACKETS To ensures precision fitment, Only Revo offers a CNC machined bracket system. Produced to a superior tolerance than that of a cast mounting system, this unique feature also ensures that the supporting brackets are strong and less prone to failure.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout of the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OE S3 (8P) intercooler with a Revo K04 Kit, Revo production KO4 software, a Revo air intake system and full Eurojet exhaust, the Revo Intercooler was then installed and tested in the same controlled environment to highlight the benefits of it's enhanced cooling. PERFORMANCE DATA Golf GTI TSI EA888 Gen1 with Revo K04 upgrade, OE S3 (8P) intercooler and Revo open cone air intake system and full Eurojet exhaust. Showing the last of five consecutive dyno runs, the efficiency of the Revo Intercooler over the OE S3 intercooler is highlighted. With max gains of +8 HP & +11NM Torque, along with increased performance throughout the entire rev range, the stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout, losing no peak power over the 5 runs. INLET TEMPERATURE This is a metric used to confirm that testing on the Revo Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the inlet temperatures during testing were equal between both coolers, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency advantage. OUTLET TEMPERETURE This graph illustrates the increased cooling performance of the Revo intercooler vs OEM S3 (8P) aluminium intercooler over all five runs. The Revo Intercooler keeps temperatures well below the OE S3 intercooler throughout all 5 runs.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 (8P) 1.8 / 2.0TFSI 2004-2013 Audi S3 (8P) 2.0 TFSI 2006-2012 Seat Altea 1.8 / 2.0 TFSI/TSI 2004-2010 Seat Leon (MK2) 1.8 / 2.0 TFSI/TSI 2004 - 2012 Seat Toledo 1.8 / 2.0 TFSI 2004 - 2009 Skoda Octavia (MK2) 1.8 / 2.0 TFSI/TSI 2004 - 2013 Skoda Superb (B6) 1.8 / 2.0 TSI 2008 - 2013 Skoda Yeti* 1.8 / 2.0 TSI 2010 - 2013 VW EOS 2.0TSI 2006 - 2016 VW Golf (Mk5/6) 1.8 / 2.0 TFSI/TSI 2004 - 2014 VW Jetta (Mk5) 1.8 / 2.0 TFSI 2006 - 2010 VW Scirocco 2.0 TFSI/TSI 2009 - 2014 VW Tiguan* 2.0TFSI 2007-2010 * Yeti / Tiguan fitment for FWD vehciles only. Does not fit AWD.  DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo TFSI Intercooler Instructions NOTES Simple replacement of the OEM part Also available for the MQB Platform

Read more less

VW GOLF MK6 GTI HIGH FLOW AIR FILTER INTAKE SYSTEM Our full air filter intake kit offers the following:  Replaces the complete standard airbox and includes heat-shield to the conical filter Includes full fitting kit and instructions for simple fitting Increases engine note – releasing the real noise of your engine Longer lifespan before cleaning required, compared to original or cotton filters Easy cleaning, no dirt caught like with V shaped filter grooves Bench tested for improved fuel economy, power and torque outputs The triple layer foam design The low maintenance and long lifespan aspects of a Revo filter come from the special triple layer foam that is used on all of our air filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions.   VEHICLE APPLICATIONS      Manufacturer Model Engine Year Audi A3 (8P) 2.0 TSI 2003 - 2012 Seat Leon MK2 2.0 TSI 2005 - 2012 Skoda Octavia Mk2 1.8 / 2.0 TSI 2005 - 2013 VW Golf MK6 2.0 TSI 2008 - 2013 VW Beetle 2.0 TSI 1999 > VW Scirocco 2.0 TSI 2008 > VW Tiguan 2.0 TSI 2007 > Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi A3 (8P) 1.6 / 1.9 / 2.0 TDI  2003 - 2012 Audi A3 (8P) 1.8 / 2.0 TFSI  2003 - 2012 Audi Q3 (8U) 2.0 TDI  2011 > Audi Q3 (8U) 2.0 TFSI  2011 > Audi TT (8J) 1.8 / 2.0 TFSI  2008 - 2014 Audi TT (8J) 2.0 TDI  2008 - 2014 Seat Alhambra 1.4 / 1.8 / 2.0 TSI  2010 > Seat Alhambra 2.0 TDI  2010 > Seat Altea 1.8 / 2.0 TFSI  2006 - 2015 Seat Altea  1.6 / 1.9 / 2.0 TDI  2004 - 2015 Seat Leon (Mk2) 2.0 TFSI  2009 - 2012 Seat Leon (Mk2) 1.6 / 1.9 / 2.0 TDI  2005 - 2012 Skoda Octavia (Mk2) 1.8 / 2.0 TSI  2005 - 2013 Skoda Octavia (Mk2) 1.6 / 1.9 / 2.0 TDI  2005 - 2013 Skoda Superb (Mk2) 2.0 TFSI  2008 - 2015 Skoda Superb (Mk2) 1.6 / 1.9 / 2.0  2008 - 2015 Skoda Yeti 1.8 TSI  2009 > Skoda Yeti 1.6 / 2.0 TDI  2009 > VW Beetle 1.4 / 2.0 TSI  2011 > VW Beetle 1.6 / 2.0 TDI  2011 > VW Caddy 1.6 / 2.0 TDI  2015 > VW Golf V (Mk5) 1.4 / 2.0 TSI  2005 - 2009 VW Golf V (Mk5) 1.9 / 2.0 TDI  2005 - 2009 VW Golf Vl (Mk6) 1.4 / 2.0 TSI  2008 - 2014 VW Golf Vl (Mk6) 1.6 / 2.0 TDI  2008 - 2014 VW Scirocco 1.4 / 2.0 TSI  2008 > VW Scirocco 2.0 TDI  2008 >  ** More applications. This Filter fits more applications, please cross-reference using the list above.   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

REAR DIFFUSER V.2 SEAT LEON MK2 CUPRA/FR (2005-2012)  fits only: SEAT LEON MK2 CUPRA/FR (2005-2012)      COMPLETE SET CONTAINS:    REAR DIFFUSER  Mounting kit   Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

The VTA is a performance blow-off valve solution for Audi, VW, Skoda and SEAT vehicles with an electronic factory diverter valve. If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: “Keep what works, replace what doesn’t” This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of “pilot operation” in the DV+, which works by repurposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market.   VTA or DV+?Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet. Why choose a VTA over a “BOV spacer”?“BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance. Why choose a VTA over a kit that includes a solenoid?Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?       VTA BLOW-OFF VALVES ARE CONSTRUCTED WITH THE SAME MATERIALS AND VALVE MECHANISM AS THE DV+, AND THEY OFFER THE EXACT SAME PERFORMANCE AND BOOST HOLDING. HOWEVER, VENTING TO ATMOSPHERE GIVES IT THE SIGNATURE BLOW-OFF SOUND, WHILST THE DV+ KEEPS THINGS QUIET. COMPETITORS' PRODUCTS FOR THE SAME VEHICLES THAT MAKE SOUND (I.E. BOV "SPACERS") TYPICALLY RETAIN THE PERFORMANCE DEFICIENCIES OF THE FACTORY DIVERTER VALVE, DELETE THE ECU CONTROL, OR REQUIRE FREQUENT MAINTENANCE AND REBUILDS. THE VTA ON THE OTHER HAND IS THE COMPLETE PACKAGE - PERFORMANCE, FIT, RELIABILITY, AND SOUND! Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet. Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications. Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.

Read more less

WHY CHOOSE THE K-BRACE?   > The main role of bracing is to increase rigidity and stability of a vehicle by preventing body roll, therefore improving grip, steering feedback and response. The K-Brace is an adaption of a strut/tower brace, but provides the same solution with significant enhancements. HEIGHTENED PERFORMANCE  > With the 4 fixing points and making use of a triangulation design, the K-brace is able to produce an undoubted amount of support in comparison to that from a singular bar strut brace. UNIQUE DESIGN > Car Manufacturers often use additional strengthening supports to the strut mountings of a standard vehicle. Therefore, by utilising those supports, in conjunction with the design of the K-Brace we are able to reduce the structural flex of the body or chassis especially during cornering. INNOVATIVE SOLUTIONS > The K-Brace will always be mounted in the most optimum position in your vehicle, while taking into consideration usability of the standard car. Rear folding seats remain fully functional, while boot space is optimised without compromising performance. TAILORED PREFERENCE > The industrial standard powder coating we provide is second to none. With 6 colours to choose from we are giving you the option to choose your alternative. SEAT LEON MK2 K-BRACE K-Brace can be installed using the Fitting aid Provided. Fits ALL SEAT LEON MK2 2005 - 2012 Available in Black-White-Grey-Red-Blue-Yellow or Unpainted International delivery available  21 Working Day lead time Quality guaranteed.   Please note; REQUIRES DRILLING AND SOME MODIFICATIONS TO THE CARPET. THERE ARE 6 - 13MM HOLES TO BE DRILLED TO ALLOW FOR RIVNUTS TO BE INSTALLED USING THE TOOL SUPPLIED.

Read more less

Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALLIPERS Our lightweight six-pot calliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The calliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the callipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITTING      Manufacturer Model Engine Year Audi A3 (8P) All 2003-2012 Audi S3 (8P) 2.0 TFSI 2003-2012 Seat Leon MK2 All 2005-2012 Skoda Octavia Mk2  All 2004-2013 VW Golf MK5/6 All 2003-2012 VW Scirocco All 2003-2012   Notes: Recommended Revo Authorised Dealer Fitment only Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi A3 (8P)  1.2 TFSI  2009 > Audi A3 (8P)  1.4 TFSI  2007 > Seat Altea  1.2 TSI  2010 > Seat Altea  1.4 TSI  2007 > Seat Leon (Mk2)  1.2 TSi  2010 > Seat Leon (Mk2)  1.4 TSI  2007 > Seat Toledo (Mk3)  1.4 TSI  2007 > Skoda Octavia (Mk2)  1.2 TSI  2010 - 2013 Skoda Octavia (Mk2)  1.4 TSI  2008 - 2013 Skoda Superb (Mk2)  1.4 TSI  2008 > Skoda Yeti  1.2 TSI  2009 > Skoda Yeti  1.4 TSI  2010 > VW Beetle  1.2 TSI  2011 > VW Golf (Mk5)  1.4 TSI  2007 > VW Golf (Mk6)  1.2 / 1.4 TSI  2009 > VW Jetta (Mk3)  1.2 TSI  2007 - 2010 VW Jetta (Mk4)  1.2 / 1.4 TSI  2011 > VW Passat  1.4 TSI  2010 > VW Scirocco (Mk3)  1.4 TSI  2008 > VW Tiguan  1.4 TSI  2010 > VW Touran  1.2 TSI  2010 >   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less