performance-st180

AIRTEC Motorsport lightweight alloy header tank for Fiesta MK7 ST180 – Complete with sight glass! No drilling required, uses original fixing points and is a direct replacement of the original Ford plastic header tank. Registered Design Right number: 6064605 AIRTEC part no: ATMSFO89

Read more less

Brake reservoir cap cover with information logosGrooved inside so it fits perfectly over original Ford brake reservoir capA must for any show car, or detailed, road car!Please note, this cap is machined from alloy not stainless steel. Fits all Focus Mk2 & Fiesta Mk7 & MK8 (Including STs)

Read more less

Fits all Petrol & Diesel Mk7 Fiesta's including ST Turbo This cover, covers up black plastic auxilary fuse box cover which is located in the Engine bay. Finished in mirror finish stainless steel and comes with strong self adhesive pads for easy fitting.

Read more less

Large round washer stopper with washer logo Has double ‘O’ ring securing systemTo fit Mk2 Focus, Mk6/7 Fiesta.To fit, remove old washer cap and simply push new polished washer stopper in place.Please note these are made from cnc billet alloy and polished to a mirror finish.

Read more less

Power steering cap cover with Power steering logo Perfectly cnc'd with cog type profile inside for the perfect fit, then polished to a mirror finish To fit Mk4, Mk5, Mk6, Mk7, Mk8 Fiesta, Mk1/2 Focus and Mondeo mk2 puma Now made in Aluminium.

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically: Your screws will never rust You can select any colour you want! This kit is for the MK7 / 7.5 Fiesta, and it comes in 3 options Option 1. All screws in Engine bay Contents: 11x Washer - 11x Stainless Steel Screw Locations: Headlights, Wings, Bonnet latch. Option 2. All screws above, Plus 4 replacement stainless steel screws that go directly into the existing plastic clips on your slam panel;. Contents: 15x Washer - 15x Stainless steel screw. Locations: Headlights, Wings, Bonnet latch, Slam Panel Option 3. All screws above, Plus boot dress up kit! Contents: 19x Washer - 19x Stainless Steel Screw Locations: Headlights, Wings, Bonnet latch, Slam Panel, Boot You've seen these on eBay for £7, So why buy from us you ask... Well, The ones on eBay come with M6 screws. We can assure you that these screws will not fit in your car. Also, our washers are made from a premium grade aluminium and anodized to last, Unlike their cheap counter parts. Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

After being very popular for other ford models, AutoSpecialists are pleased to announce their Bonnet spacer kit for Fiesta Mk7 and 7.5 including ST180 The spacers raise the rear of the bonnet up by 23mm and can be fitted within 30 minutes with special inverted bolts. HOW DO THEY FIT? Lift the bonnet up and put a soft cloth under the bottom corner of the bonnet and then one side at a time remove the 2 x 10mm bolts attaching the bonnet hinge to the bonnet, discard the old bolts and install the billet spacer block and use new inverted bolts to secure. It's that easy! A great low cost way to change the look of your Fiesta and release high under bonnet temperatures for Fast Road or Track use £34.95 for a complete kit 2 x Billet spacers and complete with stainless fixings

Read more less

To fit Black Top Zetec, Mk6, Mk7, Mk8 Fiesta, Mk3 FocusPush ‘n’ twist oil Filler Cap, with Raised Oil Can Logo.Made from solid billet alloy and polished to a mirror finish, this is a complete replacement cap.Please note this replacement cap is not made from stainless steel

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

The new VUDU Battery Tie down for the Fiesta ST180 and the ST MK8 is a little bit of style that that will enhance the visual aesthetics of your engine bay.Designed as a direct replacement for the OEM battery tie down.Made using billet aluminium and laser etched with the trademark VUDU the Battery tie down with its sleek design is rigid enough to keep your battery in place with the bonus of giving your engine bay added beauty.  

Read more less

We are proud to bring you the AET Motorsport VUDU Engine Oil Cap providing a complete replacement for the plastic OEM version. This precision machined solution not only offers an aesthetically pleasing upgrade but it far stronger and is not prone to fatigue. CNC Machined from aircraft grade billet aluminium and hard anodised in anthracite grey with laser etched VUDU branding this is the most highly detailed oil cap on the market. Dress your engine bay with a VUDU oil cap.

Read more less