performance-st180

CEUK By Pipercross Panel Filter PP1743-CEUK measures 217mm x 161mm Made exclusively by Pipercross for CEUK, these UK Made foam filters are some of the highest quality Benefits of a CEUK/Pipercross panel filter: 30-40% more air flow over your OEM paper filter Better for the environment (washable and reuseable) Improved fuel economy Lifetime warranty on manufacturing defects Handmade in the UK The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track? 

Read more less

C:Performance Maf Housing to suit the following Vehicles: MK7.5 Fiesta ST180 / ST200 70mm Internal Diameter Made from Cast aluminium then machine finished these were part of our MK7 Fiesta ST180 Intake kits! These are reduced to clear due to our recent Rebrand from "C:Performance" to "Enhanced Performance" They come in raw metal and require painting or powder coating - This can be done with a spray can for cost effectiveness making this a really cheap addon, or powder coated for the ultimate finish Picture does not show screws, however this will be provided with 2x Small threaded screws for the sensor Designed to work With CEUK/Airtec/Forge etc Stage 2 & 3 intake kits Features iconic C Logo Raised on both sides  Knurled on silicone hose side to prevent slippage Machine finished for a perfect fit every time Will fit any 70mm inlet hose and filter

Read more less

Enhanced Performance Replacement Fiesta ST Air Filter, with a 70mm diameter outlet, suitable for Enhanced Intake Kit for the ST, or as a simple upgrade! It is recommended to purchase a maf housing to work with this filter. Suitable for all the following Cars; Fiesta ST180 181ps Petrol Fiesta ST200 200ps Petrol The replacement Fiesta ST Air Filter is supplied pre-oiled and ready for installation.

Read more less

As part of our expanding Fiesta ST180 product range, AIRTEC Motorsport are proud to launch our RS-style 76mm top induction pipe suitable for track or fast road use. Inspired by the design of our Focus RS top induction pipe, we’ve created a large, free flowing pipe that joins the turbo inlet to the intake with a substantial increase in overall internal volume to reduce restriction and improve flow. A direct replacement part for the ST180, it offers increases in performance and response, as well as sound and aesthetics. Made from high quality aluminium for an improved look and feel, the pipe maintains a constant 76mm internal diameter throughout, compared to the 70mm standard item, and features a design with less bends and restrictions. It also features an AIRTEC plaque and is available in a powder-coated black finish for a subtle OEM+ look. The comprehensive package includes Pro Hoses silicone connectors and fixtures and fittings, which makes installation a simple task. There is also the option to add an AIRTEC Motorsport induction kit, featuring an aluminium intake pipe with billet MAF sensor boss, laser cut shield and a choice of a cotton of foam air filter. With valuable performance gains and an improved look to the engine bay, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars. Features: Comprehensive kit designed specially for the ST180 platform Optional induction kit with laser cut shield and cotton or foam filter Improved soundtrack and under bonnet aesthetics Huge improvement to turbo air flow Made from lightweight aluminium Long lasting, high quality black powder coat finish AIRTEC Motorsport plaque Includes all fixtures and fittings AIRTEC Part No: ATMSFO131

Read more less

The new design Stage 2 induction kit that works perfectly with the standard Fiesta ST180. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off.  Features. Removes ugly original plastic & restrictive airbox Adds power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield Adds style to your ST engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) Choose from Red filter or Black Foam Filter Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering! 

Read more less

The new design Stage 3 induction kit that works perfectly with the standard Fiesta ST180. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Replaces bigger silicone hoses with hard pipes Adds more power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield Adds style to your ST engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) AS good AS it gets. Comes with 24 month warranty 'conditions apply' Will fit Fiesta ST 200 Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering! 

Read more less

The ITG Maxogen PRO intake, (induction kit) air filter system is the best product on the market for the Ford Fiesta ST. This intake system enables the best airflow and has been dyno proven and offers performance gains and increased induction sound. Why not buy the cheaper Forge, J1 or Ramair filter?  AET Motorsport having tested hundreds of Ford Fiesta ST 180s running non-ITG filters, We have seen everything from EML lights poor running and loss of performance. Once we have removed the offending filter and fitted an ITG filter the performance increased, intake temps were lower and induction noise increased.  Designed and tested to work with all of the PERON tuning range it is the best air filter on the market for the Ford Fiesta ST180.  Spec List Perfect location for cold high-pressure air Heat soak is reduced Short direct path for air flow High-quality world leading multi-layer foam design Filter size increase by over 50% Perfectly sized CNC MAF housing means short term fuel trims are not affected Increased turbo intake noise and divertor valve discharge PERON has proven to over + 300HP - we use this kit on all stock turbo, hybrid and P3XX turbo systems at power levels in excess of 370hp Ford Fiesta ST MK7 ITG cross over pipe designed specifically for the Fiesta ST. Optimized to allow maximum airflow this best works with the ITG Maxogen air filter  The fully mandrel bent aluminium 70mm pipe helps improve intake efficiency and throttle response. Designed as a direct replacement for the restrictive stock item, this is a must for anyone running stage 3.  Applications Fits all global 2013 and newer Ford Fiesta ST 1.6T MK7 180Will not fit the 1.0ltr EcoBoost  Download Instructions  

Read more less

All Direnza Cold Air Induction Systems are supplied with a high quality, cone style air filter; designed to replace the OEM airbox, offering more surface area compared to the standard filter. Direnza air filters are manufactured from premium grade, washable cotton, ensuring long-lasting performance enhancements. Direnza Cold Air Induction Kits include lightweight alloy pipework mandrel-bent for accurate placement on your vehicle, and coated with a premium grade, black textured finish for a sleek appearance. Designed in-house by Direnza engineers, our Cold Air Induction Kits reduce blockages and significantly enhance air flow into the engine compared with stock induction arrangements, boosting your car’s soundtrack and performance. Heat-resistant silicone hoses are supplied with every Direnza Cold Air Induction Kit. An often-overlooked item, our easy-fit silicones are layered for extra durability, their 5mm wall consisting of four polyester layers finished with jet black pigment. Fitment Ford Fiesta MK7 ST180 EcoBoost 2013 – 2018 Models Please note – Installing this kit may cause the EML to illuminate due to the increased airflow. This can be corrected with an ECU remap. Product Category Air Induction Air Induction - Pipe Bore (mm) 70-76 Air Induction - Clamps 2 Air Induction - Silicone (mm) 69 Air Induction - Bolts 2 Air Induction - Brackets 1 x Heat Shield Air Induction - Filter Bore (mm) 76

Read more less

Enhanced Performance Maf Housing to suit the following Vehicles: MK7.5 Fiesta ST180 / ST200 70mm Internal Diameter Made from CNC Aluminium with a smooth flow internal design and correct scaling to allow the perfect amount of air to flow into the system as well as take an accurate reading from the MAF. Designed to work With CEUK/Airtec/Forge etc Stage 2 & 3 intake kits Features iconic EP Logo on exterior of the duct  Professionally Anodised Machine finished for a perfect fit every time Raised ends for enhanced hose grip   Will fit any 70mm inlet hose and filter  

Read more less

"Its so good we put our name on it" Giving you the brand new Enhanced Pro Filter - Made by ProRam exclusively for CEUK (RamAir) The filter itself has a 90mm Inlet, and comes with 4x Reducer Rings allowing it to be installed to an 85mm, 80mm, 75mm and 70mm inlet also! A metal end cap allows for our EP Logo & the iconic CEUK logo to be laser engraved, whilst durable rubber polymer is used at the base to provide strength! Reinforced wire mesh holds this synthetic black cotton piece together with the grab bar featuring the iconic ProRam Logo.  The perfect replacement filter for your air intake kit! Neck Inside Diameter (A): 90mm Overall Width (B): 150mm Overall Length: 165mm

Read more less

Motorsport Filtration Technology Induction Technology Group (ITG) are the suppliers for the highest level of motorsport including championship winning F1, WRC and BTCC teams. This same technology and design skill has filtered into their range of fast road / track day products. The Fiesta ST's standard air box is a major restriction when the power levels are increased, the ITG cold air system makes improvements over the standard design in every aspect. Spec List Perfect location for cold high pressure air Heat soak is reduced Short direct path for air flow High quality world leading multi layer foam design Filter size increase by over 50% Perfectly sized CNC MAF housing means short term fuel trims are not affected Increased turbo intake noise and divertor valve discharge PERON proven to over + 300HP - we use this kit on all stock turbo, hybrid and P3XX turbo systems at power levels in excess of 370hp Applications Fits all global 2013 and newer Ford Fiesta ST 1.6T

Read more less

Replacement filter for the ITG induction kit

Read more less