Performance - T-Roc R 2.0 TSI - WITH GPF

Racingline Stage 2 ‘EVO’ MQB Golf 7/8, S3, Cupra Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Golf 8 2020+> VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi A3 8Y 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TSI 8V evo 2017-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi TTRS 3 2.5 TFSI 8S 2017+> Audi SQ2 2018+> Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+> SEAT Leon IV FW 2020+> SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 5F 2015-2020> Cupra Ateca 2018+> SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Octavia IV NX 2020+> Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

Racingline RP700 Rear Brake Pads Our new RP700 Brake Pads are replacement brake pads for cars using the standard brake hardware, with applications for multiple MQB (and some other) performance models. Drive your car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP700 Brake Pads come in. Using an advanced high friction material, these new pads provide a dramatic improvement in the braking department.  A straight replacement for the factory pads using the standard brakes, yet delivering a much higher resistance to high temperature fade.

Read more less

Racingline RP700 Performance Brake Pads – 340mm Larger Brake Setup Drive your car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP700 Brake Pads come in. A straight replacement for your factory pads, using the standard brakes, yet delivering a much higher resistance to high temperature fade. You will gain a lot of performance with our upgraded brake pad set. These new High Performance RP700 Brake Pads use an advanced high friction material to provide a dramatic improvement in the braking department. Ideal for demanding driving. Perfect for fast road driving and occasional track day use. Yet without any compromise in daily driving Designed for use with your car’s factory brake hardware – simple direct replacement fitment Extensive testing of our RP700 compound has found the sweet-spot between excellent cold bite and high temp fade resistance A key development focus has been around perfecting pedal feel – resulting in progressive braking with unparalleled pedal response Available as sets of front pads or rear pads, with multiple applications (see below). Unlike other aftermarket pad brands, we offer two choices of rear pad, to suit either ventilated or solid rear discs. Pad Options VWR670004 – FRONT: // 340mm x 30mm front disc HIGH PERFORMANCE Our key development brief for the RP700 pads is to deliver near-zero brake fade under high temperature use, yet without requiring a warmup period – essential for cars that have to perform in daily driving, fast road and occasional track use. RP700 COMPOUND Our testing programme has been underway for over a year on road and track. The resulting medium hardness pad construction uses an aramid fibre compound that gives the ‘sweet spot’ of high performance and an unrivalled pedal feel underfoot. ECE R 90 APPROVED It’s a legal requirement in most countries to carry ECE R90 certification – yet many aftermarket pads do not. Giving you the peace of mind that the pads will work just as well when cold as when up to full track temperatures.   Confirmed Fitment VW Golf 8 R 2021+ (non-performance pack) VW Golf 8 GTI 2020+ VW Golf 8 GTI Clubsport 2020+ VW Golf 7 & 7.5 R 2013-2020 VW Golf 7 & 7.5 GTI 2013-2020 // Performance Package only VW Golf 7 & 7.5 GTI Clubsport & Clubsport S 2016-2020 VW Golf 7 & 7.5 GTI TCR 2017+ VW Passat B8 2015+ 3G // 2.0 TSI (280PS) and 2.0 BiTDI (240PS) VW Arteon 2.0 TSI 2017+ // 2.0 TSI (280PS) and 2.0 BiTDI (240PS) *rear pads use VWR670005 VW T-Roc R 2019+ VW Tiguan II 2016+ // higher power models (2.0 TSI & BiTDI 240PS) VW Tiguan II Allspace 2017+ // all models Skoda Octavia III 2013+ 5E // vRS and 1.8 & 2.0 TSI Skoda Superb III 2015+ 3V // 2.0 TSI (280PS) Skoda Karoq 2018+ // all models Skoda Kodiaq 2018+ // vRS, 2.0 TDI, 2.0 TSI Audi S3 2020+ 8Y Audi S3 2013-2020 8V Audi SQ2 2018+ Audi Q3 2018+ // 2.0 TSI SEAT Leon Cupra IV 2020 KL SEAT Leon Cupra III 2014-2020 5F // Not for models with Brembo 4-pot front brakes SEAT Tarraco 2018+ // all models Cupra Formentor 2020+ // 2.0 TSI Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR670006

Read more less

Racingline Stage 2 ‘EVO’ MQB Golf 7/8, S3, Cupra Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Golf 8 2020+> VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi A3 8Y 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TSI 8V evo 2017-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi TTRS 3 2.5 TFSI 8S 2017+> Audi SQ2 2018+> Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+> SEAT Leon IV FW 2020+> SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 5F 2015-2020> Cupra Ateca 2018+> SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Octavia IV NX 2020+> Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR652000

Read more less

350mm 2-Piece Floating Rear Brake Rotor Upgrade for MQB VW & Audi is a complete replacement brake rotor and caliper carrier kit, designed to work flawlessly with the factory rear calipers. Upgrading your rotors will increase overall braking performance in street, track, and HDPE driving conditions, as they keep your brakes cool and strong all day long!Weighing in at approximately 14lbs, each rotor reduces rotational weight by 1lb on each corner over the factory 15lb rotors and increases rotor diameter from 310mm to 350mm! This increases stopping power and reduces rotational weight! While reducing weight, the rotor retains proper thermal mass in the rings to adequately capture, and dissipate heat.The central hat portion of the 034Motorsport rotor is made of 6061-T6 aircraft specification aluminum. The disc is constructed out of a proprietary metal alloy that can withstand immense braking temperatures while holding form. The rotor utilizes 72 directionally curved veins to forcefully flow cool air through the rotor to dissipate heat.The face of the rotor utilizes J-Hook slots to clean the pad surface of contaminants and allows hot pad outgassing.The rotor and hat have a floating mount system that utilizes high strength alloy steel bobbins. The pins take the load from braking actions while maintaining the axial and radial float between the hat and disc, allowing for safe expansion and contraction from heat. FEATURES: Lightweight Construction (14lb 350mm 034Motorsport Rotor vs. 15lb 310mm OE Rotor) Floating, 2-Piece Design Aerospace Grade Aluminum Hats CM-250 Special Alloy Rotor Rings J-Hook Slotted Friction Face OEM Fitment & Functionality 72 Curved Vanes Force Cooling Air through Brake Disc Floating Bobbins Mounting System Replaceable Rotor Rings Lower Long-term Maintenance Cost WHAT'S INCLUDED: 034Motorsport 2-Piece Floating Rear Rotor Pair Caliper carrier conversion brackets

Read more less

Racingline Performance Stainless Steel Braided Brake Line Set The ideal first upgrade for your Stock Braking System Racingline Performance Stainless Steel Brake Lines are engineered to replace the standard brake lines with a harder wearing hose that is less prone to expansion under high temperatures.These will not only give a better pedal feel than the standard brake lines, but also last much longer. Compatible with all DOT4 and Performance Brake Fluids This Kit consists of:– 2x Rear Brake Lines– 4x Banjo Washers IMPORTANT NOTES:– YOU WILL NEED TO RE-USE THE EXISTING BANJO BOLTS– THE REAR HOSES ARE ONLY SUITABLE FOR VEHICLE WITH ELECTRONIC HANDBRAKE   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR69G7RR

Read more less

Racingline Performance Stage 3 Brake Kit - 380mm - MQB Cars The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing.Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. What's in the Kit? - Monoblock Front Brake Calipers (Pair)- Caliper Mounting Brackets (Pair)- Full Mounting Bolt Kit- Braided Steel Front Brake Line Set- Sport Brake Pad Set (Fast Road Use)- 380mm Fully Floating 2 Piece Brake Discs (Pair)If you are looking for replacement brake pad options for this brake kit, Please -- Contact UsNotes: - 380mm kit will fit under 19" Alloy Wheels- Factory 19" wheels and other brands may require spacers- Racingline and Neuspeed 19" wheels will not require Spacers- When using this kit on Track, it is important to remove the dust boots from the caliper pistons.

Read more less

Racingline Performance Stage 3 Brake Kit - 355mm - MQB Cars The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing.Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 355mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. What's in the Kit? - Monoblock Front Brake Calipers (Pair)- Caliper Mounting Brackets (Pair)- Full Mounting Bolt Kit- Braided Steel Front Brake Line Set- Sport Brake Pad Set (Fast Road Use)- 355mm Fully Floating 2 Piece Brake Discs (Pair)If you are looking for replacement brake pad options for this brake kit, Please --> CLICK HERE!! <--Notes: - 355mm kit will fit under 18" Alloy Wheels- Factory 18" wheels and other brands may require spacers- Racingline and Neuspeed 18" wheels will not require Spacers- When using this kit on Track, it is important to remove the dust boots from the caliper pistons.

Read more less

Racingline Brake Caliper and Disc Upgrade PQ35 Platform 345mm 4 Pot – VWR65G501 All the power in the world is next to useless if your stock brakes aren’t up to it. Our RacingLine Monoblock Performance Brake Upgrade for PQ35 cars is an ultra-durable, fast-road & track solution developed exclusively for VWG cars. We’ve developed these brakes from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet, all at an affordable price. What’s in the Kit? – Monoblock Front Brake Calipers (Pair)– Caliper Mounting Brackets (Pair)– Full Mounting Bolt Kit– Braided Steel Front Brake Line Set– Sport Brake Pad Set– Tripple Groove Brake Discs (Pair)   Technical Details – Caliper, Pads & Bracket combined weight – 4.4kg (9.7lb) per side– Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers– A bigger, 345mm ‘triple-groove’ disc gives greater heat capacity, thus reducing the effect of fade– Smart design features such as our ‘Tru-Loc’ hub adapter system– Built-in Brake Pad Wear Indicator– Racingline’s extensive development program on piston sizes gives a beautiful progressive pedal feel.   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR65G501

Read more less

Racingline Performance Stainless Steel Braided Brake Line Set The ideal first upgrade for your Stock Braking System Racingline Performance Stainless Steel Brake Lines are engineered to replace the standard brake lines with a harder wearing hose that is less prone to expansion under high temperatures.These will not only give a better pedal feel than the standard brake lines, but also last much longer. Compatible with all DOT4 and Performance Brake Fluids This Kit consists of:– 2x Front Brake Lines– 2x Rear Brake Lines– 8x Banjo Washers IMPORTANT NOTES:– YOU WILL NEED TO RE-USE THE EXISTING BANJO BOLTS– THE REAR HOSES ARE ONLY SUITABLE FOR VEHICLE WITH ELECTRONIC HANDBRAKE   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR69G7KIT

Read more less

Replacement Brake Pads for the Racingline ‘Stage 2’ 4-Piston Calipers – Stock CompoundThese are designed for standard road use and light fast road use. These are the ones which come in the kit when new.Wear indicators are fitted to these pads – Sport Plus CompoundThese are designed for more aggressive fast road use and ocasional ‘beginner’ track days. They have the same bite from cold as the stock compound, but an extended heat range.Some additional ‘pad noise’ and brake dust will be noticedWear indicators are not fitted to these pads – Track CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature.Additional pad noise and brake dust will be noticed.Wear indicators are not fitted to these pads Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR67000

Read more less