Performance - Toyota Yaris GR

CEUK By Pipercross Panel Filter PP2069-CEUK Made exclusively by Pipercross for CEUK, these UK Made foam filters are some of the highest quality Benefits of a CEUK/Pipercross panel filter: 30-40% more air flow over your OEM paper filter Better for the environment (washable and reuseable) Improved fuel economy Lifetime warranty on manufacturing defects Handmade in the UK The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track? 

Read more less

Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow, whilst improving response, sound and aesthetics within the engine bay. AIRTEC Part No: ATIKYGR01 TECHNICAL DATA AIRTEC Motorsport Induction Kit Upgrade for Toyota Yaris GR   We’re proud to announce the launch our induction kit upgrade suitable for the Yaris GR model for fast road or track use.   Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow, whilst improving response, sound and aesthetics within the engine bay.   Featuring larger 80mm pipework throughout with two hard pipes and two high-quality silicone connectors, the huge cotton air filter replaces the restrictive OEM air box set up. To ensure the new air filter doesn’t suffer with heat soak issues from the confines of the engine bay, a laser cut heat shield protects the air filter and provides a shroud to ensure it channels only fresh air from the front intake.   The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay.   The kit is a direct replacement that requires no additional drilling or cutting to fit, and comes complete with all the correct fixtures and fittings, as well as detailed instructions.   Features: Larger 80mm hard pipes throughout Comprehensive kit is a direct replacement for original air box Large air filter for improved flow and increased performance Improved soundtrack and under bonnet appearance Laser cut shield protects from heat soak and directs cold air to the filter Long lasting, high quality black powder coat finish Direct fit and comes with all bolts, brackets and fixings AIRTEC Part No: ATIKYGR01

Read more less

Description This is a performance enhancing induction kit for the Toyota Yaris GR. Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 14-16bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Black powdercoated 4" inlet pipe 4" red pleated filter Silicone joiner Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2020 Toyota Yaris 1.6 GR 2021 Toyota Yaris 1.6 GR

Read more less

As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our Carbon Fibre Closed Air Induction System suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving flow whilst maintaining low intake temperatures, which improves performance, response, sound and aesthetics within the engine bay. Having previously designed a shielded induction kit for the Yaris GR model, we were keen to develop a more extensive intake package to offer further improvements. Using our experience from developing and producing our WRC-inspired Closed Air Induction System (CAIS) for the Focus RS that is proven to dramatically increase power and torque, we embarked on developing an entire replacement air box carefully moulded to our design in a lightweight carbon fibre material to help thermal efficiency. Sealed inside is a large Group-A style cotton air filter that draws fresh air solely from the front intake, ensuring minimal heat soak issues and the lowest possible intake temperatures. Our design also features a replacement MAF housing and rear intake pipe, both 80mm in diameter and finished in black powder-coated finish. The kit comes complete with high quality Pro Hoses silicone connectors, as well as all fixtures and fittings required for a simple installation. The kit is a direct replacement that comes complete pre-built and ready to install. It requires no additional drilling or cutting to fit and comes with detailed fitting instructions.   DYNO TESTEDDeveloped on our own comprehensively modified AIRTEC Motorsport Yaris GR, with the Closed Air Induction System the car produced 335bhp, 5hp more than our open filter induction kit, whilst our thermal imaging camera showed it continued to repel heat build-up from the local area.  Overall, the result is a complete kit that offers increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay that is perfectly suited to the GR. Tegiwa Imports Air Intake Test.Vehicle fitted with aftermarket cat back and GPF delete, plus upgraded panel filter. Stock GR Yaris Air Box – Dyno Power 277BHP / 272.2 FT LBS AIRTEC Motorsport Enclosed CAIS – Dyno Power 289.3BHP / 275.9 FT.LBS 12.3BHP gain over stock. Features: Comprehensive intake kit Enclosed air box ensures the lowest intake temperatures Front intake directs constant feed of cold air to the filter Large cotton air filter for improved flow and increased performance Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish on all aluminium hard pipes Lightweight carbon fibre air box Includes all fixtures and fittings

Read more less

Product Description After discussions with many GR Yaris owners about airbox modifications, Forge Motorsport are proud to release the Toyota Yaris GR Inlet Duct. The Forge inlet duct allows you to add an aesthetically pleasing carbon fibre part to your Yaris GR’s engine bay and help keep your inlet temperatures down during spirited driving and whilst on the track or rally stage.    By utilising 3D scans and SolidWorks CAD, our development team have been able to optimise the size of the inlet duct, creating an increase in uninterrupted cold air to be scooped into the stock airbox. 3D printed test parts were used alongside CAD simulation to ensure the optimum size and geometry. This inlet duct performance car part is much larger than stock with a close fit to the front bumper and airbox to ensure that the heat from the engine causes minimal effect. During testing on track days, the original duct caused inlet air temperatures to be heavily influenced by heat soak and fluctuated dramatically. Meanwhile the Forge inlet duct kept the inlet air temperatures not only reduced but at a more consistent temperature. A reduced consistent temperature is of great importance because any high temperature peaks will cause the ECU to retard the ignition and reduce the power you have available. The Forge inlet duct design incorporates a free-flowing path to both the upper and lower opening of the airbox, whereas the stock design has no flow management to the lower opening and the upper is small and not fully sealed. It is worth understanding that the lower opening is of far greater importance to the performance of your Yaris GR. There is a vacuum operated flap which is activated when under full throttle conditions, therefore the Forge Motorsport Inlet Duct ensures that your Yaris is getting colder directed air when the engine needs it the most. Data was collated and logged live by a passenger on a track day running in conjunction with an aftermarket intercooler on a 5 lap open pit session back to back against the stock inlet scoop (another 5 lap session). Inlet air temps had been reduced from 42°C to between 35 and 36°C. We even saw temperatures of up to 45°C on the stock duct. Fluctuation between temperatures on the stock inlet duct were greatly improved when air was fed to the secondary inlet scoop via the composite Forge Motorsport inlet feed. Please browse our Toyota Yaris GR performance parts today for other products in addition to this GR Yaris induction kit which you can fit to improve your track/rally experience. A Forge induction kit will unleash the power of your vehicle and help your engine breath. A recirculating or dump valve will be solution to the many failures that have occurred on the OEM part. With the OEM design including open sections, baffles, and noise restrictors to disrupt the airflow, the inlet duct is part of our acclaimed Hi Flow range and will ensure that your Yaris is getting critical cold air. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the engine bay some character. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.      

Read more less

As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our Closed Air Induction System suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving flow whilst maintaining low intake temperatures, which improves performance, response, sound and aesthetics within the engine bay. AIRTEC Part No: ATIKYGR02 TECHNICAL DATA As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our Closed Air Induction System suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving flow whilst maintaining low intake temperatures, which improves performance, response, sound and aesthetics within the engine bay. Having previously designed a shielded induction kit for the Yaris GR model, we were keen to develop a more extensive intake package to offer further improvements. Using our experience from developing and producing our WRC-inspired Closed Air Induction System (CAIS) for the Focus RS that is proven to dramatically increase power and torque, we embarked on developing an entire replacement air box carefully moulded to our design in a GRP composite material to help thermal efficiency. Sealed inside is a large Group-A style cotton air filter that draws fresh air solely from the front intake, ensuring minimal heat soak issues and the lowest possible intake temperatures. Our design also features a replacement MAF housing and rear intake pipe, both 80mm in diameter and finished in black powder-coated finish. The kit comes complete with high quality Pro Hoses silicone connectors, as well as all fixtures and fittings required for a simple installation. The kit is a direct replacement that comes complete pre-built and ready to install. It requires no additional drilling or cutting to fit and comes with detailed fitting instructions.   DYNO TESTEDDeveloped on our own comprehensively modified AIRTEC Motorsport Yaris GR, with the Closed Air Induction System the car produced 335bhp, 5hp more than our open filter induction kit, whilst our thermal imaging camera showed it continued to repel heat build-up from the local area.  Overall, the result is a complete kit that offers increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay that is perfectly suited to the GR. Features: Comprehensive intake kit Enclosed air box ensures the lowest intake temperatures Front intake directs constant feed of cold air to the filter Large cotton air filter for improved flow and increased performance Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish on all alloy hard pipes Grp body painted in high gloss black finish Includes all fixtures and fittings AIRTEC Part No: ATIKYGR02

Read more less

ITG Filters Panel Air Pro Filter for the Toyota Yaris GR. The ITG Panel Air Filter for the Toyota Yaris GR is a cheap and simple upgrade for the Yaris GR. The ITG Air Filter is a direct replacement for the restrictive OEM filter found in the stock models. Replacing the stock filter for the ITG filter results in an increase of airflow, while maintaining high quality filtration.  ITG Filters use foam in their filters rather than paper, which is what most OEM Filters are made from, because it allows for optimum airflow and filtration. Foam achieves optimum airflow, cleaning efficiency, and dust load tolerance, over their paper counterparts.  Key Features: - Increased Airflow  - Tri-Foam filtration. - Increase power output. - Hand washable & re-usable.  - Lasts 5x longer than paper filter. - Dust load tolerance.    ITG Filters are one of the leading manufactures of performance air filters. Their dedicated research and testing has built up their reputation over the years. Their Tri-Foam filter design is unmatched. Check out the graph below from ITG to see how their foam compares to other filter designs.

Read more less

This item is brand new for the GR Yaris, Benefits of a Pipercross panel filter: 30-40% more air flow over your OEM paper filterBetter for the environment (washable and reuseable)Improved fuel economyLifetime warranty on manufacturing defectsHandmade in the UKThe low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?

Read more less

ProfilterOver the years, itg have created the lightest, most capable filters for all fields of motorsport, from Formula 1 to the World Rally Championship.The same design skills, advanced technology and attention to detail are also used to produce our Profilter range of high grade replacement filters for both road and competition use.

Read more less

Uprated Air filter from HKS

Read more less