Performance - Transporter T6

The engineers at Forge have developed this high performance tube & fin intercooler to replace the OEM intercooler found on the new VW T6 2.0 TSI. This van uses a derivative of the high performance “EA888” 2.0TSI engine found in the ever-popular Golf GTI. During the extensive development process for this intercooler, several different core options and constructions were tested and evaluated before settling on this tube and fin core approximately 695x311x62mm.  Offering significantly reduced inlet temperatures over the OEM and an increase in power of +7 BHP and 8Nm of torque when fitted to a stock vehicle.       With this extra intercooler capacity, remapping the vehicle would bring further performance gains. The intercooler is a direct fit to the vehicle and no modification or trimming of the bumper is required. The intense, yet OEM appearance of the durable black powder coating is what gives this intercooler a superior finish, in both quality and performance.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Developed for the new VW T6 Transporter 2.0TSI engine. A set of four high quality silicone boost hoses with clamps to uprate the OEM T6 Boost hoses. A must for mapped engines. Available in red. blue, and black The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* These hoses replace the OEM hoses part numbered:7E0 145 709 B7E0 145 708 A7E0 145 980 B7E0 145 790 A   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by your turbocharger. This design has been created to withstand the harshest of environments and are designed to assist in the protection and prolonging of your engine components. Its unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product fits the T78, T88, and T6 turbochargers.   ·       Stainless Steel Rivets ·       Stainless Steel Fasteners ·       Carbon fabric Outer Shell ·       Calcium Magnesium Silicate Wool constructed Inner Core ·       High temperature silica fabric Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This hose kit has been designed to allow the vehicle owner to modify or colour code the visible chargecooler hoses consisting of 2x Boost hoses (3 included in kit dependant on engine model) and 2x coolant hoses. The kit replaces the hoses shown below: These hoses have been carefully replicated to produce a product that exceeds the OEM specification (Silicone does not break down over time compared with rubber based products).The hose kit comes with all of the hose clamps necessary to complete the installation. In this 5 hose kit you will only require 4 out of the 5 hoses, this is dependant on your engine model. Below we have detailed which hoses will fit which engine type: T6 -180PS kit uses Hoses #1883, #1884, #1885 & #1906 T6 - 204PS kit uses Hoses #1883,#1884, #1885 & #1886 Available in a range of colours, simply choice between red,blue, or black using the drop down menu. Suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge has a well-established reputation for offering the best in chargecooler radiator upgrade kits for high-performance German vehicles - Audi S4 to Mercedes AMG A45’S. Using the knowledge gained in developing these uprated chargecooler radiators, we have used our proven testing and development procedure to develop an uprated kit for the Volkswagen T6 2.0TDI 180 & 204PS Transporter. The Forge all-aluminium construction chargecooler radiator offers extra reliability over the OEM type radiator with plastic endtanks that can fail with time. Maximising the available space behind the bumper of the vehicle the Forge chargecooler radiator offers a 50% increase in frontal area and a 50% increase in volume over the OEM. The radiator is a single pass design with inlet and outlet at diagonal opposites optimising the flow of coolant across the entire radiator core. Available in our highly durable stain black powdercoated finish. The kit is supplied with: 1x chargecooler radiator1x coolant hose kit2x billet aluminium hose couplerAll the necessary hoses clips and fixings   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less