Performance - Vauxhall Astra J MK6 GTC

This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increasded or the engine has been modified.    In The Box:1 x FMDVCS14R Valve1 x Uprated Yellow Spring1 x Forge Sticker FITS: ChevyCruze 1.4 TurboSonic 1.4 TurboFordFocusRS MK3VauxhallAdam2014 Onwards (1.4T)AstraJ (2009-2016)2011-2015 (1.4T)Cascada2012-2018 (1.4T)CorsaD (2010-2015)2012-2015 (1.4T)E (2015 Onwards)(1.4T 2015 Onwards)Insignia2008-20142011-2014 (1.4T)Meriva2010-2017 (1.4T)Mokka2012-2017 (1.4T)Zafira2011-2019 (1.4T)

Read more less

Designed as a direct replacement for the OEM valve which is prone to failure when the engine has been tuned or had an upgrade to the engine management software. This valve is complete and ready to install with no fitting kit required. This valve is supplied assembled with our "green" coded spring which is suitable for standard or mildly tuned engines, and also comes with an uprated 'yellow' coded spring.    This valve is suitable for: Vauxhall/Opel Astra G or H type Z20LET Engine Astra VXR J Type Astra 1.6 GTC Corsa VXR 1.6 Turbo Z16LER Engine Vauxhall Zafira A or B with Z20LET Engine Bentley Continental GT 2003-11   In The Box:1 x FMDVK04D Valve1 x Uprated Yellow Spring1 x Forge Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A turbo actuator for the Vauxhall Astra VXR (J Type). Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACVXRJ Actuator1 x Forge Sticker This actuator is built with a green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 3, 048 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Replacement brake hoses manufactured from stainless steel braided PTFE hose coated in a protective PVC sheath and fitted with swaged high quality stainless steel fittings. We also include stainless steel hose support brackets to ensure a perfect installation. Our hoses eliminate all the problems associated with the original manufacturer’s rubber ones.Immediate brake pedal responseLifetime Warranty .Choice of colour.Reduces pedal sponginess under hard braking.Compatible with all brake fluids.Will not corrode.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less