Splitters and extensions

Add a sleek custom touch to your MKVII with a black honeycomb badgeless grille Designed to look like the OEM GTI grille, except badgeless, this one piece grille is an excellent way to add a custom touch to your vehicle. A direct bolt in installation, it is easier than ever to get a more aggressive look. Includes black plastic hood notch filler pieces that can be installed right out of the box, painted before installation to match, or the notches can be professionally filled and painted at a body shop. The installed photos show these three scenarios.

Read more less

Upgrade the exterior styling on your VW MK7 GTI with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" exhaust tips; compatible with OEM exhaust, although, we recommend large exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7 GTI Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Use the provided installation brackets to mount the center of the diffuser to the OEM lower valance brackets. The outer hardware nuts/bolts secure the outboard fins to the bumper cover. Ensure all the clips are fully engaged before tightening hardware.  *4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.*

Read more less

Raise the level of style on your Volkswagen MK7 GTI with the ECS Tuning Carbon Fiber Front Bumper Grille Flares. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  These were designed to provide the vehicle with a more aggressive look by accentuating the area around the inlet grilles, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Front Bumper Grille Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the fog lights, providing a similar, aggressive look to the R400 concept car Grille Flares extend around the inside of the inlet grille to cover any exposed paint Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team.    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Bumper Grille Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   **PLEASE NOTE: These are NOT compatible with Park Distance Control (parking sensors) as they directly interfere with the PDC sensors. ** ** Our ECS Tuning Front Lip Spoiler (ES3525095) shown is NOT included but is available separately. ** *4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.*

Read more less

Raise the level of style on your Volkswagen MK7.5 Golf R with the ECS Tuning Carbon Fiber Front Bumper Grille Flares and Bumper Trim "Tee" Overlays. This quality addition was engineered and designed in-house to fit directly to your factory front bumper, with no modifications required.  These were designed to provide your VW with a more aggressive look by accentuating the area around and inside the outer bumper grilles, providing bold, aggressive styling.  An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Outer Bumper Grille Inlet Duct Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Amplifies the shape of the OEM outer grille trim for aggressive styling  Outer Grille Trim "Tee" Overlays are designed to work cohesively in conjunction with the ECS Bumper Flares for further styling improvements  Applies directly to the front outer grille trim using the pre-applied heavy duty 3M adhesive tape to accentuate the area around the bumper grilles  Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Research and Development Team.   KIT CONTENTS This is for QTY 1 set of front, outer Bumper Grille Flares and QTY 1 set of front, inner Bumper Grille "Tee" Overlays (left and right). **All other products are shown for reference and are available separately. Please reference product images showing the parts that are included.**     PRODUCT DEVELOPMENT Our ECS Carbon Fiber Outer Bumper Grille Inlet Duct Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the carbon fiber components directly to the front bumper cover grille trim using the pre-applied adhesive tape. See our Installation Tips under the "Installation" tab for more detail. 

Read more less

Upgrade the exterior styling on your VW MK7.5 GTI with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 GTI Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Read more less

Raise the level of style on your Volkswagen MK7.5 GTI with the ECS Tuning Carbon Fiber Fog Light Trim and Front Bumper Grille Flare Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  These were designed to provide your VW with a more aggressive look by accentuating the area around the fog grilles, providing bold, aggressive styling.  An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Bumper Flares and Foglight Trim Overlays are made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Carbon Fiber Bumper Flares amplify the shape of the OEM fog light surround trim for aggressive styling  Carbon Fiber Fog Light Trim Overlays add a touch of premium carbon fiber to the factory fog light trim Both parts apply directly to the front-end using the pre-applied heavy duty 3M adhesive tape to accentuate the area around the fog lights and fog light trim Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Research and Development Team.   KIT CONTENTS This is for QTY 1 set of front Bumper Grille Flares (1 left and 1 right) and QTY 1 set of front Foglight Trim Overlays (Left and Right side, upper and lower- 4 pieces). **All other products are shown for reference and are available separately. Please reference green-highlighted image showing the parts that are included.**     PRODUCT DEVELOPMENT Our ECS Carbon Fiber Bumper Flares and Foglight Trim Overlays were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. Showcased on our ECS Tuning 2019 SEMA RallyWagen "2.0" South America VW GTI    INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the parts directly to the front bumper trim using the pre-applied adhesive tape. 

Read more less

Are you content with the factory exhaust on your Volkswagen GTI but would like to upgrade to larger exhaust tips to properly fill out your diffuser, or just enhance the overall look? ECS Tuning has just what you need with our direct-fit , clamp-on 4.0" Exhaust Tips! Our ECS 4.0" Exhaust Tips were designed and engineered in-house as a direct-fit replacement to the factory tips. Simply cut the spot welds off your factory tips, slide on and clamp down your new ECS tips, then stand back and enjoy.    PART DESIGN Designed and Engineered in-house to fit directly to your OEM exhaust system, after removal of the OE tips Tips are made from T304 Stainless Steel and feature T304 band clamps, stainless bolts and zinc coated nuts Available in either chrome or black chrome finishes Tips feature a 4.0" Double Wall, Rolled Edge, Slant Cut outlet Precision laser etched "ECS Tuning" stacked logo    PRODUCT DEVELOPMENT Our ECS Exhaust Tips were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Requires cutting of the OE exhaust tip spot welds to remove the OEM tip.  Due to the OEM tailpipe length some of the OE pipe may be visible when looking inside the exhaust tip. For an improved aesthetic look you can trim the OE tailpipes to suit by using our Schwaben Exhaust Pipe Cutting Tool -  ES3106581.  Fits 2010 - 2017 Volkswagen GTI's with OEM catback exhaust. 

Read more less

Are you content with the factory exhaust on your Volkswagen GTI but would like to upgrade to larger exhaust tips to properly fill out your diffuser, or just enhance the overall look? ECS Tuning has just what you need with our direct-fit , clamp-on 4.0" Exhaust Tips! Our ECS 4.0" Exhaust Tips were designed and engineered in-house as a direct-fit replacement to the factory tips. Simply cut the spot welds off your factory tips, slide on and clamp down your new ECS tips, then stand back and enjoy.    PART DESIGN Designed and Engineered in-house to fit directly to your OEM exhaust system, after removal of the OE tips Tips are made from T304 Stainless Steel and feature T304 band clamps, stainless bolts and zinc coated nuts Available in either chrome or black chrome finishes Tips feature a 4.0" Double Wall, Rolled Edge, Slant Cut outlet Precision laser etched "ECS Tuning" stacked logo    PRODUCT DEVELOPMENT Our ECS Exhaust Tips were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Requires cutting of the OE exhaust tip spot welds to remove the OEM tip.  Due to the OEM tailpipe length some of the OE pipe may be visible when looking inside the exhaust tip. For an improved aesthetic look you can trim the OE tailpipes to suit by using our Schwaben Exhaust Pipe Cutting Tool -  ES3106581.  Fits 2010 - 2017 Volkswagen GTI's with OEM catback exhaust.

Read more less

Raise the level of style on your Volkswagen MK7 Golf R with the ECS Tuning Carbon Fiber Front Bumper Grille Flares. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  These were designed to provide the vehicle with a more aggressive look by accentuating the area around the inlet grilles, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Front Bumper Grille Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the outer bumper grilles, providing a similar, aggressive look to the R400 concept car Grille Flares extend around the inside of the inlet grille to cover any exposed paint Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team.    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Bumper Grille Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   ** All other products shown in installed photography are NOT included... This kit is for QTY 2 front bumper flares ONLY!  ** *2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

ECS Tuning Gloss Black Rear Diffuser - Mk7 Golf GTI Upgrade the exterior styling on your 2013 - 2017 Volkswagen MK7 GTI with our ECS Tuning Gloss Black Rear Diffuser.An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads!Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with the ECS Gloss Black Diffuser!  PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side) PRODUCT DEVELOPMENT The ECS MK7 GTI Rear Diffuser was designed, engineered, tested and quality inspected by ECS's own Research and Development team in their Wadsworth, Ohio facility. ECS strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Read more less

Raise the level of style on your VW MK7 GTI with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Carbon Fiber mounting brackets bolt to the existing lower valance mounting locations with supplied hardware, with an optional well nut insert and machine screw to secure the front center bumper support.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware make for an easy, non-permanent installation that provides a confident, secure fitment. Center post mounting hole location is optional. Drilling is only required for the center mounting post.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.*

Read more less

Raise the level of style on your VW MK7.5 GTI with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Mounts to existing lower valance mounting locations using heavy duty carbon fiber mounting brackets with supplied hardware Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less