dump valve

GFB’s 8060 FX-R race version Fuel Pressure Regulator is capable of flowing enough fuel for up to 1500hp, and features two -6AN ORB (O-Ring Boss) inlet ports, two 1/8” NPT gauge ports, and one -6AN ORB outlet port. The two inlet ports can be used for single or dual rails, and the two gauge ports allow the use of both a mechanical gauge and electronic pressure sensor. 2 x -6AN ORB inlet ports 2 x 1/8” NPT gauge ports 1 x -6AN ORB outlet port 1 x 1/16” NPT manifold reference port Supplied with: FX-R Fuel Pressure Regulator, Mounting bracket, 2 x 1/8” NPT pressure plugs for gauge ports not being used, 1 x -6AN plug for inlet port not being used, 1 x 1/16” NPT x 5/32” (4mm) hose barb.       All GFB FX Regulators Feature: 1:1 FUEL PRESSURE RISE RATE SUITABLE FOR UNLEADED, ETHANOL, METHANOL AND DIESEL FUELS DOUBLE LAYER/DOUBLE REINFORCED DIAPHRAGMS WITH A BURST STRENGTH EXCEEDING 1000PSI TEFLON CO-POLYMER SEAT WITH STAINLESS VALVE TO RETAIN FUEL PRESSURE LONGER AFTER SHUT DOWN FULLY SEALED UPPER BOOST/VACUUM REFERENCE CHAMBER STATIC PRESSURES ADJUSTABLE FROM 28PSI TO 72PSI (2-5BAR) COMPLETELY SERVICEABLE MULTIPLE BODY PORTS ALLOW FOR A LARGE VARIETY OF SETUP OPTIONS MANUFACTURED IN AUSTRALIA IN ACCORDANCE WITH ISO 9001 GFB’s Fuel Pressure Regulators are built with the same precision, machining quality, and reliability that is the foundation of all GFB products. The compact size of the GFB FX regulators conceals a large flow capacity, and the multiple ports allow for a variety of fuel system setups including multiple rails and gauge/pressure sensor monitoring. Internally, like all GFB products you’ll find unique features and small touches that make the difference between a good product, and a great one. For example, we use a double-layer, double-reinforced diaphragm with a burst strength exceeding 1000psi (68BAR)! Unlike others that use a metal-to-metal valve seat, the FX regulators feature a replaceable soft Teflon valve seat that helps retain fuel pressure longer after the car is shut down for easier re-starting. We even went to the trouble of adding an o-ring sealed spring hat to ensure no boost/vacuum leakage through the spring adjusting screw. All FX regulators have a 1:1 fuel pressure rise rate and a base pressure range from 28-72psi (2-5BAR).   ONLY COMPATIBLE WITH:   Porsche 911

Read more less

GFB’s 8060 FX-R race version Fuel Pressure Regulator is capable of flowing enough fuel for up to 1500hp, and features two -6AN ORB (O-Ring Boss) inlet ports, two 1/8” NPT gauge ports, and one -6AN ORB outlet port. The two inlet ports can be used for single or dual rails, and the two gauge ports allow the use of both a mechanical gauge and electronic pressure sensor. 2 x -6AN ORB inlet ports 2 x 1/8” NPT gauge ports 1 x -6AN ORB outlet port 1 x 1/16” NPT manifold reference port Supplied with: FX-R Fuel Pressure Regulator, Mounting bracket, 2 x 1/8” NPT pressure plugs for gauge ports not being used, 1 x -6AN plug for inlet port not being used, 1 x 1/16” NPT x 5/32” (4mm) hose barb.       All GFB FX Regulators Feature: 1:1 FUEL PRESSURE RISE RATE SUITABLE FOR UNLEADED, ETHANOL, METHANOL AND DIESEL FUELS DOUBLE LAYER/DOUBLE REINFORCED DIAPHRAGMS WITH A BURST STRENGTH EXCEEDING 1000PSI TEFLON CO-POLYMER SEAT WITH STAINLESS VALVE TO RETAIN FUEL PRESSURE LONGER AFTER SHUT DOWN FULLY SEALED UPPER BOOST/VACUUM REFERENCE CHAMBER STATIC PRESSURES ADJUSTABLE FROM 28PSI TO 72PSI (2-5BAR) COMPLETELY SERVICEABLE MULTIPLE BODY PORTS ALLOW FOR A LARGE VARIETY OF SETUP OPTIONS MANUFACTURED IN AUSTRALIA IN ACCORDANCE WITH ISO 9001 GFB’s Fuel Pressure Regulators are built with the same precision, machining quality, and reliability that is the foundation of all GFB products. The compact size of the GFB FX regulators conceals a large flow capacity, and the multiple ports allow for a variety of fuel system setups including multiple rails and gauge/pressure sensor monitoring. Internally, like all GFB products you’ll find unique features and small touches that make the difference between a good product, and a great one. For example, we use a double-layer, double-reinforced diaphragm with a burst strength exceeding 1000psi (68BAR)! Unlike others that use a metal-to-metal valve seat, the FX regulators feature a replaceable soft Teflon valve seat that helps retain fuel pressure longer after the car is shut down for easier re-starting. We even went to the trouble of adding an o-ring sealed spring hat to ensure no boost/vacuum leakage through the spring adjusting screw. All FX regulators have a 1:1 fuel pressure rise rate and a base pressure range from 28-72psi (2-5BAR).   ONLY COMPATIBLE WITH:   Porsche 911

Read more less

GFB’s 8060 FX-R race version Fuel Pressure Regulator is capable of flowing enough fuel for up to 1500hp, and features two -6AN ORB (O-Ring Boss) inlet ports, two 1/8” NPT gauge ports, and one -6AN ORB outlet port. The two inlet ports can be used for single or dual rails, and the two gauge ports allow the use of both a mechanical gauge and electronic pressure sensor. 2 x -6AN ORB inlet ports 2 x 1/8” NPT gauge ports 1 x -6AN ORB outlet port 1 x 1/16” NPT manifold reference port Supplied with: FX-R Fuel Pressure Regulator, Mounting bracket, 2 x 1/8” NPT pressure plugs for gauge ports not being used, 1 x -6AN plug for inlet port not being used, 1 x 1/16” NPT x 5/32” (4mm) hose barb.       All GFB FX Regulators Feature: 1:1 FUEL PRESSURE RISE RATE SUITABLE FOR UNLEADED, ETHANOL, METHANOL AND DIESEL FUELS DOUBLE LAYER/DOUBLE REINFORCED DIAPHRAGMS WITH A BURST STRENGTH EXCEEDING 1000PSI TEFLON CO-POLYMER SEAT WITH STAINLESS VALVE TO RETAIN FUEL PRESSURE LONGER AFTER SHUT DOWN FULLY SEALED UPPER BOOST/VACUUM REFERENCE CHAMBER STATIC PRESSURES ADJUSTABLE FROM 28PSI TO 72PSI (2-5BAR) COMPLETELY SERVICEABLE MULTIPLE BODY PORTS ALLOW FOR A LARGE VARIETY OF SETUP OPTIONS MANUFACTURED IN AUSTRALIA IN ACCORDANCE WITH ISO 9001 GFB’s Fuel Pressure Regulators are built with the same precision, machining quality, and reliability that is the foundation of all GFB products. The compact size of the GFB FX regulators conceals a large flow capacity, and the multiple ports allow for a variety of fuel system setups including multiple rails and gauge/pressure sensor monitoring. Internally, like all GFB products you’ll find unique features and small touches that make the difference between a good product, and a great one. For example, we use a double-layer, double-reinforced diaphragm with a burst strength exceeding 1000psi (68BAR)! Unlike others that use a metal-to-metal valve seat, the FX regulators feature a replaceable soft Teflon valve seat that helps retain fuel pressure longer after the car is shut down for easier re-starting. We even went to the trouble of adding an o-ring sealed spring hat to ensure no boost/vacuum leakage through the spring adjusting screw. All FX regulators have a 1:1 fuel pressure rise rate and a base pressure range from 28-72psi (2-5BAR).   ONLY COMPATIBLE WITH:   Porsche 911

Read more less

GFB’s 8060 FX-R race version Fuel Pressure Regulator is capable of flowing enough fuel for up to 1500hp, and features two -6AN ORB (O-Ring Boss) inlet ports, two 1/8” NPT gauge ports, and one -6AN ORB outlet port. The two inlet ports can be used for single or dual rails, and the two gauge ports allow the use of both a mechanical gauge and electronic pressure sensor. 2 x -6AN ORB inlet ports 2 x 1/8” NPT gauge ports 1 x -6AN ORB outlet port 1 x 1/16” NPT manifold reference port Supplied with: FX-R Fuel Pressure Regulator, Mounting bracket, 2 x 1/8” NPT pressure plugs for gauge ports not being used, 1 x -6AN plug for inlet port not being used, 1 x 1/16” NPT x 5/32” (4mm) hose barb.       All GFB FX Regulators Feature: 1:1 FUEL PRESSURE RISE RATE SUITABLE FOR UNLEADED, ETHANOL, METHANOL AND DIESEL FUELS DOUBLE LAYER/DOUBLE REINFORCED DIAPHRAGMS WITH A BURST STRENGTH EXCEEDING 1000PSI TEFLON CO-POLYMER SEAT WITH STAINLESS VALVE TO RETAIN FUEL PRESSURE LONGER AFTER SHUT DOWN FULLY SEALED UPPER BOOST/VACUUM REFERENCE CHAMBER STATIC PRESSURES ADJUSTABLE FROM 28PSI TO 72PSI (2-5BAR) COMPLETELY SERVICEABLE MULTIPLE BODY PORTS ALLOW FOR A LARGE VARIETY OF SETUP OPTIONS MANUFACTURED IN AUSTRALIA IN ACCORDANCE WITH ISO 9001 GFB’s Fuel Pressure Regulators are built with the same precision, machining quality, and reliability that is the foundation of all GFB products. The compact size of the GFB FX regulators conceals a large flow capacity, and the multiple ports allow for a variety of fuel system setups including multiple rails and gauge/pressure sensor monitoring. Internally, like all GFB products you’ll find unique features and small touches that make the difference between a good product, and a great one. For example, we use a double-layer, double-reinforced diaphragm with a burst strength exceeding 1000psi (68BAR)! Unlike others that use a metal-to-metal valve seat, the FX regulators feature a replaceable soft Teflon valve seat that helps retain fuel pressure longer after the car is shut down for easier re-starting. We even went to the trouble of adding an o-ring sealed spring hat to ensure no boost/vacuum leakage through the spring adjusting screw. All FX regulators have a 1:1 fuel pressure rise rate and a base pressure range from 28-72psi (2-5BAR).   ONLY COMPATIBLE WITH:   Porsche 911

Read more less

TECHNICAL DATA AIRTEC Turbosmart Shortie Kompact Series valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also fit the popular Ford Ecoboost engines. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost,  the new BW/KKK/Ecoboost Kompact valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve on all BorgWarner EFR, KKK and Ecoboost turbos, the Kompact Shortie Plumb Back provides better boost response and greater boost handling capability. Included with each  Kompact Shortie kit is:Model specific valve, Straight and Banjo Nipples, Mounting screws and Spring clamps. APPLICATION: Buick Regal 2.0 Turbo Chevrolet Cobalt SS (2008-2010)Chevrolet HHR SS (2008-2011) Ford F150 3.5 EcoBoost  (2011-2012) – Requires two valvesFord Focus MK3 ST 2.0 EcoBoostFord Fusion 2.0 EcoBoostFord XR5/RS 2.5 5-cylinder (2004-2010) Holden HSV Astra VXR Opel Astra G TypeOpel Astra H TypeOpel Astra VXR J type Pontiac Solstice GXP Porsche 911 Turbo (997) – Requires two valvesPorsche 911 GT2 (997) – Requires two valves Saturn Sky Redline Vauxhall Astra 1.6 GTCVauxhall Astra G TypeVauxhall Astra H TypeVauxhall Astra VXR J typeVauxhall Corsa VXR 1.6Vauxhall Zafira A or B Volvo C30 T5Volvo C70 T5Volvo S40 T5Volvo S60 T5Volvo V50 T5 (FWD/AWD)Volvo V70 T5 AIRTEC part number: TS-0941-1004

Read more less

TECHNICAL DATA AIRTEC Turbosmart Shortie Kompact Series valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also fit the popular Ford Ecoboost engines. Unlike the standard, plastic valves that use un-reinforced diaphragms and are known to crack under increased boost,  the new BW/KKK/Ecoboost Kompact valves use O-Ring sealed piston which, coupled with their billet aluminium construction give them over 30PSI boost handling capability. Designed as a bolt-on replacement of the factory valve on all BorgWarner EFR, KKK and Ecoboost turbos, the Kompact Shortie Plumb Back provides better boost response and greater boost handling capability. Included with each  Kompact Shortie kit is:Model specific valve, Straight and Banjo Nipples, Mounting screws and Spring clamps. APPLICATION: Buick Regal 2.0 Turbo Chevrolet Cobalt SS (2008-2010)Chevrolet HHR SS (2008-2011) Ford F150 3.5 EcoBoost  (2011-2012) – Requires two valvesFord Focus MK3 ST 2.0 EcoBoostFord Fusion 2.0 EcoBoostFord XR5/RS 2.5 5-cylinder (2004-2010) Holden HSV Astra VXR Opel Astra G TypeOpel Astra H TypeOpel Astra VXR J type Pontiac Solstice GXP Porsche 911 Turbo (997) – Requires two valvesPorsche 911 GT2 (997) – Requires two valves Saturn Sky Redline Vauxhall Astra 1.6 GTCVauxhall Astra G TypeVauxhall Astra H TypeVauxhall Astra VXR J typeVauxhall Corsa VXR 1.6Vauxhall Zafira A or B Volvo C30 T5Volvo C70 T5Volvo S40 T5Volvo S60 T5Volvo V50 T5 (FWD/AWD)Volvo V70 T5 AIRTEC part number: TS-0941-1004

Read more less

This Blow Off, or Dump valve, is for the Mercedes 2.0 Turbo GDi engine found in the CLA250 that has the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. All parts require for installation are included, together with full installation instructions.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised

Read more less

Our uprated valve for the Hyundai i30N has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a fully atmospheric (blow off) valve, or a recirculating valve - you choose! Highlights: Utilising world leading springs for more precise operation and consistency All internal and external components have been made in the UK, ensuring top quality, and offering a valve with faster response times and longer service intervals The piston uses heat stabilised Viton O-rings Lubricated with high temperature Mobil1 grease to ensure a long life with minimal wear and very long service intervals A super durable and responsive aluminium piston Fully serviceable and rebuildable in minutes Available in anodised black Unlike other valves on the market, ours produces no check engine lights (EML) Covered by the unique Forge Lifetime Warranty*     This part replaces OEM Part No. 282342-CTA4 This kit will include all the parts required for atmospheric or recirculating set up.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Atmospheric blow off valve for the Fiat Grande Punto 1.4 T-Jet, Abarth and Abarth Essesse and Alfa Romeo Mito fitted with the T-Jet engine. The valve itself is of dual piston design for longevity with the ability to be tuned with replacement springs if required. If you require a recirculation valve please see FMDVPUNTR Please note: this product will NOT fit the 1.4 Multiair engine, please see our separate listing FMDVF14A    In the Box:1 x Atmospheric Valve1 x Wiring Harness1 x 2 Metres of Vacuum Hose10 x Cable Ties1 x Solenoid, Bracket, and Screws1 x M6 Socket Cap Screw1 x M6 Washer1 x 5mm Self Tapping Screw1 x P Clip2 x Vacuum Taps2 x Hose Clamps1 x Silicone Blanking Cap1 x Forge Sticker     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport Atmospheric blow off valve for the Audi S4 B9 This product is a solenoid operated valve that integrates seamlessly with the OEM electronics resulting in absolutely no-fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. These valves, designed and manufactured by Forge are engineered to remedy the failure issues experienced with the OEM solenoid valves when the diaphragm or plastic piston fails which would effectively result in a boost leak. Forge valves use full billet alloy construction with a piston based internal design that provides significantly improved reliability, lightning fast response and will withstand additional tuning upgrades. A recirculating valve replacement is also available. FMDV13R In The Box:1 x FMDV13 Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Blue Spring (Uprated)10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x Instructions1 x Forge Keyring and Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This valve is for the turbocharged 1.5-litre EcoBoost petrol engine. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.  In the Box:Solenoid & Bracket Wiring Harness Vac Tap Blue idle springForge Keyring & Sticker4mm Vacuum HoseCable Ties (x10)Instructions       Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Replaces OEM part Number CJ5G-9U465-BA This valve is for the turbocharged 2.3-litre EcoBoost petrol engine found in the Ford Focus ST280. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade.  Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind.  All of the necessary components and detailed instructions are included, and everything is designed to make installation as simple as possible.  

Read more less