Enhanced Edition H7 HID Kit A fantastic upgrade to any vehicle providing exceptional light output and very low power consumption 35w quick start technology  choice of colour temps  For best vision remain between 4500k and 6000k - although HID are bright, the higher the kelvin you go, the more blue is produced and ultimately the darker the colour the less vision  have you been #Enhanced? Please Note: Some vehicles may require a HID clip, this is sold seperately! Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Show your support for the number one car lighting company in the UK by becoming part of our team! Several colours available

Read more less

This is an over stock clearnce product and due to differences we no longer work with Stern Kit comprises of: 1x Rear Seat delete Bar - Gloss Black 1x Cargo Net - Black Rear Seat Delete Carpet - Black Brand new and never been installed - will fit all MK8 and MK8.5 Models Full RRP of this kit is £666 + carriage - as this is clearance its listed for £400 This is none returnable as a clearance item!  

Read more less

Please note: As the 1.0 EcoBoost engine is present across multiple vehicles of car & van - the spacing on hoses can differ! As such the smallest of the 3 hoses is made for the biggest spacing necessary and on some models may require 0.5-1 inch trimming off each end prior to install Full hose kit for the 1L EcoBoost Fiesta - available for 1 weekend Only!    Kit includes -Primary Induction Hose -Alloy crossover Pipe -Secondary Hose -Turbo Hard Pipe -Intercooler Hoses   RRP £355, your price £300 Please Note: the oil breather hose requires trimming to fit inside the secondary hose. Intercoolers and induction kits also available to finish off the bay       

Read more less

The AIRTEC Motorsport Air-Ram Scoop and RS Slam Panel for Group A induction kit just got better! Now offered with an AIRTEC Motorsport-branded RS slam panel that fits both pre-facelift and facelift models. The Group A open air filter kit has been a great addition to the ST225 product range through the years, however ensuring it has a constant feed of cold air feed can prove tricky. AIRTEC Motorsport has come up with the ideal solution with our Air-Ram diverter scoop that has a factory appearance with in the engine bay but works to continually force cold air towards the filter, ensuring consistent flow and performance. The optional AIRTEC Motorsport slam panel fits all ST models and works with the Air-Ram diverter scoop for the perfect combination. Please note, this currently only fits AIRTEC’s Group A induction kit. Kit includes: 1x Alloy fabricated Air-Ram feed finished in Pro-Series satin black 3x Billet alloy spacers and stainless-steel fittings Optional AIRTEC Motorsport RS slam panel that fits both pre-facelift and face lift models AIRTEC part no: ATMSFO45

Read more less

DE-RES HOSE FOR HYUNDAI I20N  

Read more less

PLEASE NOTE – THE UNDER TRAY IS NOT INCLUDED You will need to cut the original under tray to fit this product  TECHNICAL DATA As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our front cooling guide upgrade suitable for track or fast road use. The guide offers a simple solution to improving the transmission and transfer box’s cooling ability, which helps to ensure rising temperatures don’t cause any damage. How it worksWhen the oil inside the gearbox and transfer box gets hot, its ability to lubricate and protect both the gears and LSD is reduced. This is more likely to occur during extended periods of hard use, such as on track, so it is beneficial to stabilise and reduce temperatures in order to limit premature wear. The AIRTEC Motorsport cooling guide works by directing fast-flowing air passing underneath the car towards the gearbox and transfer box casings. By providing a sustained flow of fresh air to towards these items, their ability to withstand heat soak is increased, which therefore allows them to better control operating temperatures in comparison to standard. Available in a high-quality and durable powder coated red finish, the guide fits to the original undertray and comes complete with all the correct fixtures and fittings, as well as detailed instructions. PLEASE NOTE – THE UNDER TRAY IS NOT INCLUDED You will need to cut the original under tray to fit this product  Features: Directs a flow of fresh air to help cool the gearbox and transfer box casings Helps to reduce transmission running temperature Made from lightweight aluminium High-quality red powder coated finish Attaches to the original undertray AIRTEC Part No: ATMSYGR09

Read more less

AIRTEC Motorsport are proud to offer the oil cooler kit for the Fiesta ST 180 Long overdue but it’s been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality. Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters. Kit Includes. 13 row high performance AIRTEC motorsport oil cooler Aerotec 90 degree Black anodised fittings with Black Oil hose Billet anodised hose line seperators x 4 Gearbox mounted hose securing bracket finished in ProSeries Black Designed to fit with AIRTEC stage 3 intercooler & suppled with a bracket for cars running standard or other aftermarket intercooler! Today’s high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for “normal” driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. AIRTEC offers the solution to marginal cooling systems—race proven lightweight and efficient oil coolers designed to fit in the smallest practical space. Registered Design Right number: 6030031 AIRTEC part no: ATOILFO4

Read more less

AIRTEC Motorsport’s solution to improving the original set up is utilise the available space behind the front bumper and develop a direct replacement radiator that’s both wider and thicker. This means capacity is increased by a 65% over standard, whilst frontal area is also increased by 13% to help cool the extra capacity. AIRTEC part no: ATRADBMW5 TECHNICAL DATA As part of our expanding BMW platform product range, AIRTEC Motorsport is proud to launch our auxiliary radiator upgrade aimed at BMW M2 Competition/M3 & M4 models for fast road or track use. AIRTEC Motorsport’s solution to improving the original set up is utilise the available space behind the front bumper and develop a direct replacement radiator that’s both wider and thicker. This means capacity is increased by a 65% over standard, whilst frontal area is also increased by 13% to help cool the extra capacity. Despite the significant increases, the radiator fits neatly behind the bumper and requires no modifications to fit, using the OEM mounts and the original coolant connectors.  Furthermore, to protect the larger core in its vulnerable position at the front of the car, there is also a mesh stone guard fitted in place, as OEM radiators can often become damaged over time, which limits their cooling ability.  Finished in a high-quality powder-coated black finish, the comprehensive fitting kit includes a detailed instruction fitting guide. Also available individually.  Dimensions:OEM radiator:Width: 250mmHeight: 183mmDepth: 40mmCapacity: 9.9 litresFrontal area: 425cm² AIRTEC Motorsport radiator:Width: 262mmHeight: 183mmDepth: 58mmCapacity: 2.8 litresFront area: 479cm² Features:  65% increase in capacity to the original 13% larger frontal surface area Offers improved cooling ability Stone guard to protect the core Direct fit with no cutting or trimming Comprehensive fitting guide AIRTEC part no: ATRADBMW5

Read more less

A pair of mandrel bent Alloy boost pipes for the Peugeot 207 GTI and Citroen DS3 turbo. These have been designed to maximise flow and reduce the resistance of the original OEM fitment. Connecting hose available in red,blue,and black. Please select your choice in the options. Due to variations in fitment we supply alternative hoses within the kit.

Read more less

This Intercooler Resonator delete hose fits the 2007 onwards BMW Mini Cooper S. This hose replaces the two OEM hoses and a sound resonator. The purpose of the OEM resonator is to reduce the roar / whoosh noise that can often be associated with air passing through pipe work. By removing this resonator with a smooth bore hose the resistance is reduced. Several of our competitors claim horsepower gains for the installation of this type of hose, but our own testing showed these to be marginal so we prefer not to make such claims. We did however see change in the torque characteristics with between 10 and 15 ft/lbs improvement on our own test car. It is always difficult to quantify gains for a specific product as a lot will depend on other modifications that have been carried out.Typically if the car is running tuned software with a free lowing downpipe and exhaust, changes made on the intake, with the fitment of this hose and or a intake filter kit will be more dramatic. From a drivers perspective, after fitting this hose on its own, we did not perceive any increase in noise, but there was a noticeable change in the willingness for the engine to accelerate, which can be associated with the torque improvement and small gain in horsepower.As an added bonus this hose is available in red, blue, or black (a real stealth install) and will withstand greater temperatures and pressures than the original hose.   •    The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.•    This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.•    The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically•    The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.•    Lifetime warranty* *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Bonnet latch surround with stainless fittings fits all Focus Mk8 models including ST-Line and ST200. Surround has cut out for bonnet ajar switch Fitting is really simple, remove old bonnet latch bolts, fit new stainless latch surround and secure with new stainless bolts provided. Part no: ASCOVFO109

Read more less