exhaust-systems

Milltek Sport Fiesta ST 180 Cat Back Exhaust ( Non Resonated Race Version) - Milltek Sport Exhaust Essential for Maximum Performance Class Quality and Guarantee of the Milltek Sport Brand. fitting kit included Huge Increase in bore size to 70mm Use OEM Gasket Release the Flow from the new Mk7 Fiesta ST 180 Ecoboost engine with a Milltek Sport Non resonated Race Version Sports Exhaust System. A New Release from Milltek Sport : The ST180 Mk7 Ford Fiesta Ecoboost gains a the fantastic 70mm Stainless steel performance exhaust system. With a beautiful engine note the new Ford Turbo 1.6 Ecoboost engine is brought to life with this piece of artwork again crafted by the masters at Milltek Sport. So what is the difference between the two non resonated Milltek Systems ? The cost of the non resonated vs the Race non resonated is exactly the same. Its all about the internal design of the full flow 70mm pipework . The Race Version has less silencing than the normal non resonated.. The standard non resonated noise level is all taken care of by some very special full bore trickery within the single rear silencer box. Its not about restricting flow, its about reflecting sound waves internally to create a perfectly tuned rear silencer.

Read more less

Milltek Fiesta ST GPF Cat Back The new ecoboost makes a fantasic noise so why not show it off with millteks latest Exhaust The system features a full 70mm bore size, full stainless pipework and 2x GT90 Style Tailpipes Gasket and fitting kit Huge Increase in bore size 70mm Class Quality and Guarantee of the milltek sport brand Retains original Valve so sports modes work as stock Fantastic choice of tailpipe trims - choose from drop down menu Please note: Although we carry a large amount of stock in house, there may be times of the year where delays are caused due to sell outs. If concerned please contact us to check stock

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Fiesta performance exhausts are made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these parts replace the centre and rear sections. This resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version (excluding the centre silencer) which is a louder option. All relevant fittings and gaskets are supplied. Cobra Sport Product Review Fords exciting little Fiesta 1.0L EcoBoost is a real punchy little number that is just crying out for an exhaust upgrade to add to all the fun. The team at Cobra Sport were able to work their usual magic and create a stainless steel exhaust worthy of the car’s sporty reputation. The results are pretty amazing, if we do say so ourselves! But don’t just take our word for it, get involved and buy one and let us know what you think! As we realise everyone is individual in their tastes for sound, we have created the exhaust system to come from the Catalytic Converter backwards in both a resonated and non-resonated versions. This allows those in need of some extra drama to opt for the non-resonated system and those seeking a more subtle enhancement to go with the resonated option. With the OE system, on tick over, coming in at 62dB, the resonated option at 75dB and the non-resonated version at 79dB, both variations will add a more noticeable soundtrack. As always Cobra Sport haven’t left the visual appeal of the system go unnoticed, adding a smart twin 3” (76.2mm) tailpipe shaped to follow the clean lines of the Fiesta’s rear valance, which really enhances the vehicle’s aesthetic appeal. The usual Cobra Sport refinements come as standard, CNC mandrel bent tubing and precision TIG welding on all joints, with the entire system being hand finished, using grade 304 stainless steel throughout. We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

Read more less

REAR DIFFUSER + MILLTEK RS UPGRADE KIT - FORD FIESTA MK8 ST & MK8.5 ST (2018-2024) FITS ONLY: FITS ONLY: FORD FIESTA ST MK8 / MK8.5 (2018-Onward) Kit designed for Ford Fiesta MK8 ST & MK8.5 ST with Milltek sport exhaust system already installed (changing car look to RS style). COMPLETE SET CONTAINS:- Rear diffuser - Milltek RS upgrade extension kit MILLTEK DESCRIPTION: Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance. We always recommend the exhaust is fitted by a competent garage or tuning workshop so normally avoid issuing install guides. There is a generic one on their website here - MILLTEK INSTALLATION GUIDE MILLTEK EU TYPE-APPROVAL CERTIFICATE REAR DIFFUSER DESCRIPTION: ** This product is a replacement for original diffuser **  CHARACTERISTICS OF REAR DIFFUSER:- Gloss Black- Adds aesthetic value.- Lightweight and offers some flexibility.- This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION ABOUT REAR DIFFUSER:- No additional work is required to finish the product.- The product will arrive with a protective film.- Removal of the protective film will void any returns, only remove once you are certain the product will fit.- We cannot be held responsible for the incorrect installation or use of this product.- Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.- We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.- This product has been TUV MATERIALGUTACHTEN certified.- The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. Product is made of ABS plastic. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Large Bore Downpipe and Hi-Flow Sports Cat-Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXFD096 Large Bore Downpipe and Hi-Flow Sports Cat-Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap 69.85 2.75 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Cat-back-Race system. Non-resonated (louder) with Twin 80mm GT80 Polished Tips Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXFD100 Cat-back-Race system. Non-resonated (louder) with Polished Tips 69.85 2.75 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Replacement motor for the exhaust valve on the MK8 Fiesta ST Ideal if yours is damaged or if you have a post 2020 model with the different valve which wont fit with exhausts! These are plug and play fitment 

Read more less

Non-Resonated: GPF/OPF Bypass Non-Resonated for Fitment to Milltek Sport Cat Back Only Requires Stage 2 ECU Remap Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXFD273 GPF/OPF Bypass Non-Resonated 70 2.76 Yes No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.   Resonated: GPF/OPF Bypass Resonated for Fitment to Milltek Sport Cat Back Only Requires Stage 2 ECU Remap Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXFD275 GPF/OPF Bypass Resonated 70 2.76 Yes No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Milltek Sport Fiesta ST 180 Back Box Delete Pipe - Race Pipe - Milltek Sport Exhaust Fully Stainless Steel Open Pipe workfits to existing Milltek Mid pipe and Tail Pipes The Milltek Cat Back Exhaust system has many different versions, all contain a rear silencer box but there are two versions already. Non Resonated - which has theperfect mid ground tone(Race) Non Resonated - which was the loudest availableand Now Milltek have made this !!The Full Race Rear Box Delete which lifts noise another step higher whilst still providing a beautiful deep tone. This Milltek Rear Box Delete for the Fiesta ST180 will fit all existing Milltek systems and remove the rear silencer totally from the car.Your existing Milltek detatchable tail pipes will fit the two outlet pipes and exit in the excat same place as they do now Not for Road Use Designed for Motorsport / Race Applications only to be fitted with Milltek Sport Centre Sections only Part No. Tip Style Pipe Diameter Race EC Valvesonic SSXFD200 2.76'' (70mm) Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Description Scorpion Exhausts GPF Back WITH Valve - MK8 Fiesta ST Brand new from Scorpion, Created on our very own MK8 ST we present to you the brand new GFP (Gasoline Particulate Filter) back exhaust system for the MK8 ST The system is a full 70mm diameter none resonated with the option of valved or none valved (This listing is for WITH Valve) Twin 90mm Daytona Tips in either Polished or Black Ceramic are available with this system. Scorpion are currently developing a downpipe with catalyst and a GPF Replacement to follow   Since the early 1970’s Ford have been associated with producing an array of performance cars for the road beginning with the Mk1 Escort RS1600 which paved the way for the iconic models of the mid 80’s including the Escort RS Turbo & Sierra RS Cosworth’s through to the current day ST & RS models all of which benefitted from the development of performance Scorpion exhausts over the years. Success in rallying and touring cars along with Scorpions know how in producing sports exhausts sees true track to road technology transfer across the range. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SFDS089CF Product Type GPF-Back Valve Yes Fitment Years 2018 - 2020 Fits To OEM / Scorpion Model Fitment Fiesta ST MK8 (Pre September 2020) Pipe Diameter 70mm/2.75" * Tailpipe Ascari Tailpipe Diameter 90mm Shipping Dimensions 102cm x 42cm x 33cm Notes Original System will need cutting for fitting.Fits Pre September 2020 models.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Fiesta ST performance exhausts are made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. This sports exhaust is part of the Cobra Sport Venom range and is extremely loud. This exhaust is sold for non road use only and will exceed all legal noise regulations. All relevant fittings and gaskets are supplied. Cobra Sport have taken their range of exhausts for the Ford Fiesta ST180 to the next level with the release of a Venom style system finished with either a single or twin tailpipe. The new Venom systems remove the back box found in our cat back systems to offer an exhaust system with unrivalled sound and tone. The bore size has been increased to 3” (76.2mm) and the stainless steel pipework which runs the full length of the vehicle allowing unrivalled flow rates whilst creating the pitch perfect aggressive sound preferred by many ST180 owners. The Cobra Sport system Venom system delivers a significant weight saving over standard. Testing of the Venom system resulted in a staggering 21% reduction in weight from the OE system’s 14.42kg, with the Cobra Sport system weighing in at only 11.2kg. The most significant improvement of the Venom system is the incredible sound quality produced by the simplified pipework. The volume of the Venom cat back system which includes a resonated section increases by +8.7db to 89.9db at 4000rpm. Matched with the additional Sports Cat front pipe the sound levels at 4000rpm rise by +15db to 96.2db creating an incredibly vibrant deep sporty exhaust tone. Part number: FD77 We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

Read more less

Non-Resonated: Non-resonated (louder). Polished Tips. Requires Fiesta Zetec S rear valance (part number 1833264) available from your local Ford dealer Part No. Description Tailpipe Pipe Diameter Race EC **MSFD239** **Connecting Pipe from Milltek Cat Back to OE Cat 2.37" (60.30mm) MSFD241REP Front Silencer Rep Pipe MSFD200 Over-Axle Pipe MSFD201 Rear Silencer Assembly   **{Not required when fitting as a turbo back system}** Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK. Resonated: Resonated (quieter). Polished Tips. Requires Fiesta Zetec S rear valance (part number 1833264) available from your local Ford dealer Part No. Description Tailpipe Pipe Diameter Race EC MSFD239 Connecting Pipe from Milltek Cat Back to OE Cat 2.37" (60.30mm) MSFD241 Front Silencer MSFD200 Over-Axle Pipe MSFD201 Rear Silencer Assembly Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less