Filters

K&N Cleaning Kit Aerosol 99-5000EU K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.99-5000EU will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition   Can be used on both Foam & Cotton / Pleated  Labeled in English, Spanish, Swedish, Polish and Czech Restores filter to like new condition Removes road grime, engine exhaust and grease from K&N filters The only cleaner designed specifically for K&N cotton filters

Read more less

CEUK By Pipercross Panel Filter PP1743-CEUK measures 217mm x 161mm Made exclusively by Pipercross for CEUK, these UK Made foam filters are some of the highest quality Benefits of a CEUK/Pipercross panel filter: 30-40% more air flow over your OEM paper filter Better for the environment (washable and reuseable) Improved fuel economy Lifetime warranty on manufacturing defects Handmade in the UK The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track? 

Read more less

DESCRIPTION What vehicles does this fit? Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering! This air filter is a direct replacement part. If you’re unsure at all about choosing the correct part for your vehicle, just contact us via the contact form. This PRORAM performance filter has been designed to replace your standard OEM air filter inside your vehicles air box. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of Motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Key Dimensions Filter Type: Flat Filter Quantity: 1 Filter Shape: Unique Filter Length: 216mm Filter Width: 160mm Filter Depth: N/A Filter Internal Neck Diameter: N/A   Part Number Cross References This part is an equivalent replacement for the following manufacturers part numbers… OEM Part Numbers:  Ford 180530 Ford 2066235 Ford FA1935 Ford GN159601AA Mann Part Numbers: C22031 K&N Part Numbers: 33-3117 Pipercross Part Numbers: PP1998 ITG Part Numbers: WB-285 Other Part Numbers: BMC FM100220   Features  High flow, synthetic nanofiber filtration media Fits in the OEM Airbox and replaces inefficient paper filter Lifetime washable filter Precision injection molded for a perfect fit Guaranteed surface area using high quality custom blended polymer

Read more less

CEUK By Pipercross Panel Filter PP2008-CEUK Made exclusively by Pipercross for CEUK, these UK Made foam filters are some of the highest quality Benefits of a CEUK/Pipercross panel filter: 30-40% more air flow over your OEM paper filter Better for the environment (washable and reuseable) Improved fuel economy Lifetime warranty on manufacturing defects Handmade in the UK The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track? 

Read more less

DESCRIPTION This PRORAM performance filter has been designed to replace your standard OEM air filter inside your vehicles air box. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of Motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Key Dimensions Filter Type: Flat Filter Quantity: 1 Filter Shape: Unique Filter Length: 196mm Filter Width: 160mm Filter Depth: N/A Filter Internal Neck Diameter: N/A   Part Number Cross References This part is an equivalent replacement for the following manufacturers part numbers… OEM Part Numbers: FoMoCo CN11-9601-AD FoMoCo 8V21-9601-AB FoMoCo 8V21-9601-AB Ford 1836805 Ford 1729860 Ford 1803059 Ford 1793585 Ford 1810699 Ford 8V219601AA Ford 1516725 Ford 1516725 Mazda Y645-13Z40A Mann Part Numbers: C17006 K&N Part Numbers:33-2955 Pipercross Part Numbers: PX1743 ITG Part Numbers: WB-232 Other Part Numbers: BMC FB574/20   Features  High flow, synthetic nanofiber filtration media Fits in the OEM Airbox and replaces inefficient paper filter Lifetime washable filter Precision injection molded for a perfect fit Guaranteed surface area using high quality custom blended polymer

Read more less

PRORAM Replacement Panel Air Filter for Ford Focus MK4 1.0 1.5 2.0 EcoBoost This PRORAM performance filter has been designed to replace your standard OEM air filter inside your vehicles air box. These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of Motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Key Dimensions Filter Type: Flat Filter Quantity: 1 Filter Shape: Rectangle Filter Length: 268mm Filter Width: 205mm Filter Depth: N/A Filter Internal Neck Diameter: N/A   Part Number Cross References This part is an equivalent replacement for the following manufacturers part numbers… OEM Part Numbers: Ford 2210514 Mann Part Numbers: C 27 031 K&N Part Numbers: 33-3131 Pipercross Part Numbers: PP2008 ITG Part Numbers: N/A Other Part Numbers: N/A   Features  High flow, synthetic nanofiber filtration media Fits in the OEM Airbox and replaces inefficient paper filter Lifetime washable filter Precision injection molded for a perfect fit Guaranteed surface area using high quality custom blended polymer  

Read more less

REVO OEM+ AIR INTAKE SYSTEM FORD FIESTA ST MK8 1.5 ECOBOOST The Revo OEM+ Air Intake System for the 1.5 EcoBoost engine improves performance whilst utilising the stock airbox. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo ECU Software. Engineered to directly replace the restrictive pipework and filter, this kit comes complete with a front silicone hose, aluminium pipe, three-layer foam filter, turbo inlet silicone and fitting kit. KEY FEATURES Increased Performance Improved Air Flow Efficiency Increased diameter crossover Three Stage Foam Filter Utilises stock airbox   OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. OEM+ systems replace any restrictive components with parts precisely engineered to reduce turbulence and improve airflow. Revo Flush Fit silicone hoses avoid unwanted turbulence at joins and increase the rate at which air can flow ensuring maximum performance at any level of tuning. CROSS OVER PIPE The Revo engineering team knew that to create the most effective kit, every component had to be considered to maximise and smooth airspeed. The system is designed around the aluminium cross over pipe, mandrel-bent to maintain the internal diameter in the corner and to remove the restrictions found in the OEM pipe. The direct routing and increased diameter pipe offer superior flow and deliver more air to the turbocharger over a shorter period.   SILICONE HOSES The plastic hoses on the stock system are designed with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbo. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement.   AIR FILTER The standard paper filter found in most vehicles performs well under normal conditions, however, with the increased power it becomes a major choking point in the system. Revo filters work by trapping dirt particles within each of the oiled foam layers while allowing air to negotiate its way through, reducing restriction and offering much longer service intervals. The new Revo filter features a direct replacement three-layer foam filter,   MOUNTING BRACKET AND FITTING KIT The Revo kits come complete with a full fitting kit that allows for easy installation. Included is a fully machined crossover bracket which increases the strength of this fixture point and alleviates any possibility of bracket failure from engine movement.     RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled dyno testing. The Revo Fiesta Mk8 OEM+ air intake system was tested in-house to compare the performance against that of the Ford OEM intake. First tested on a vehicle running the OEM intake with Revo Stage 1 software, Revo Intercooler and a Milltek GPF back exhaust, the Revo intake was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA The results show improvement throughout the whole rev range, but especially towards the top end of the rev range. The Revo intake offering an average gain of +4WHP, and +6NM torque over the stock part. Increased airflow also delivers impressive peak performance gains of +11WHP @6100rpm and +13NM @6100RPM over the stock intake system. AIRFLOW More air, less restriction. The Revo system was tested on a flow bench to highlight the efficiency of the kit in allowing more air to reach the turbo, quickly and with less restriction. The OEM system reached its maximum potential of 490 cubic feet per minute with a restriction of 1082 mmWg, compared to the Revo system which was able to flow 570 CFM with a restriction of only 1029 mmWg. This difference allows the engine to still make power at the top of the rev limit, whilst also highlighting the efficiency and less restriction at the lower end, resulting in smoother and increased throttle response.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Fiesta ST 1.5 EcoBoost 2018 onwards DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford Fiesta MK8 ST OEM+ Intake System Instructions NOTES Simple replacement of the OEM part Stock airbox not included

Read more less

CEUK By Pipercross Panel Filter PP2069-CEUK Made exclusively by Pipercross for CEUK, these UK Made foam filters are some of the highest quality Benefits of a CEUK/Pipercross panel filter: 30-40% more air flow over your OEM paper filter Better for the environment (washable and reuseable) Improved fuel economy Lifetime warranty on manufacturing defects Handmade in the UK The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track? 

Read more less

OVERVIEW Designed to increase horsepower Washable, reusable, and engineered to last for the life of your vehicle Designed to provide high airflow and exceptional filtration Engineered to fit easily into your factory air box 10-Year/Million Mile Limited Warranty Only needs cleaning every 50,000 miles under normal highway driving conditions Emissions legal in all 50 States Will not void vehicle warranty   DETAILED INFO Air Filter Shape Panel Filter Material Cotton Gauze Washable Yes Height 1.625 in (41 mm) Outside Length 10.563 in (268 mm) Outside Width 8.063 in (205 mm) Package Contents 1 Air Filter Package Quantity 1 Warranty 1,000,000 Miles/10 Year Product Style Panel Air Filter Weight 1.5 lb (0.7 kg) Filter Re-Oiling Amount 2.18 oz (64 ml) Product Box Height 11.56 in (294 mm) Product Box Length 10.44 in (265 mm) Product Box Width 1.75 in (44 mm)

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory air box and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High airflow with three layers of foam Lifetime warranty Lasts up to 60,000 miles before cleaning is required depending on driving conditions Works with original manufacturers air box   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing airflow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full air flow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to original purchaser with proof of purchase)     FITTING        Manufacturer Model Engine Year Audi A3 (8V)  1.8 / 2.0 TFSI  2012 > Audi A3 (8V)  1.6 / 2.0 TDI  2012 > Audi TT (Mk3)  1.8 / 2.0 TFSI  2014 > Audi TT (Mk3)  2.0 TDI  2014 > Seat Leon (Mk3)  1.8 / 2.0 TSI  2012 > Skoda Octavia (MK3)  1.8 / 2.0 TSI  2013 > Skoda Octavia (MK3)  1.6 / 2.0 TDI  2013 > Skoda Superb (Mk3)  1.8 / 2.0 TSI  2015 > Skoda Superb (Mk3)  1.6 / 2.0 TDI  2015 > VW Golf Vll (Mk7)  1.8 / 2.0 TSI / GTI / R  2012 > VW Golf Vll (Mk7)  1.6 / 2.0 TDI / GTD  2012 > VW Golf Vlll (Mk8)  GTI 2.0 TSI  2019 > VW Golf Vlll (Mk8)  2.0 TDI  2019 > VW Passat  1.8 / 2.0 TSI  2014 > VW Passat  1.6 / 2.0 TDI  2014 > VW Polo GTI  2.0 TSI  2018 > VW Tiguan  2.0 TSI  2016 > VW Tiguan  2.0 TDI  2016 > VW Touran  1.8 TSI  2015 > VW Touran  1.6 / 2.0 TDI  2015 >

Read more less

REVO CONE CONE AIR INTAKE SYSTEM AUDI S1 2.0 TFSI The Revo open cone Air Intake System for the Audi S1 improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo Software. Engineered to directly replace the stock airbox, pipework and filter on the Audi S1. The Revo System offers a high-quality open cone replacement complete with a heat shield to improve airflow and the performance of your vehicle. KEY FEATURES Increased performance +13HP at hubs & +18NM Torque Improves Air Flow Efficiency 53% Larger Hose & Inlet Volume Three Stage Foam Filter with Mesh Silicone Coolant Hose OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and silicone hose which joins directly to the turbo inlet. Revo Flush Fit joins eliminate unwanted turbulence and increase the rate at which air can flow, ensuring maximum performance at all tuning stages. SILICONE HOSE The Revo silicone hose is designed to directly replace the plastic hose and rubber corrugated parts. Increased inlet diameter of 21% reduces restriction and promotes smooth airflow while an integrated wire helix reinforces the hose and prevents collapsing under negative pressure.   MACHINED INLET The machined inlet replaces the restrictive OEM plastic elbow and is designed to securely fit the OE unit using locking tabs and integrated O-rings. Only the Revo intake kit features an inlet almost double the cross-sectional area. This means air can stabilise and distribute before a smooth tapered transition to the turbo.   FILTER AND HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points and rubber mounting bushings to provide an easy and secure installation.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled Dyno testing. AIRFLOW  An overall air volume increase of 50% over the OE part allows for faster and increased airflow. The carefully designed silicone hose has its own support bracket mated to a machined hose fitting, maintaining the correct position during engine movement. A constant taper in the hose ensures a smooth transition of airflow from the air filter to turbo and results in an increase in air volume over the stock part. Further helped by the machined inlet that matches the turbo inlet for the ultimate in airflow characteristics.   DYNO GRAPH Testing was carried out on an Audi S1 2.0 TFSI (6 Speed manual) with Revo Stage 1 Software fitted with the OEM system and then the Revo Air Intake System. With a consistent gain throughout the rev range, the Revo intake offered a peak gain of 12HP at the hubs over the stock part. A maximum increase in airflow of up to +16 kg/hr gives impressive gains of 13HP @5100rpm and 18NM @5100RPM over using the stock intake system.   FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi S1 2.0 2014>  

Read more less

MMR Performance Cotton Panel Air Filter For The BMW M135i / M235i The MMR Performance Cotton Panel Air Filter allows your BMW M135i or M235i model to breath to it's maximum capability with a high performance and high quality panel filter. MMR Performance developed their own range of performance air filters to provide significant enhancements to that of the original airbox with improved filtration, performance and induction noise enhancements.  Please select the material you require from the drop down menu with a lightly oiled or dry filter material to choose from. Key Features: Enhanced engine performance Enhanced induction tone Designed to be used with the OE air filter housing Available in a lightly oiled, or dry filter material Easily fitted and completely washable. Lifetime guarantee Applications: BMW M135i BMW M235i  Fitting the MMR Performance Panel Air Filter is simple and can be done quickly and easily from your own home. Should you require a fitting from one of our technicians, please get in contact with a member of the team at AET Motorsport.  Call or Email to discuss: Tel: 01924 228042 | Email: info@aetmotorsport.com

Read more less