Forge Motorsport Shop

A simple way to tap into your manifold on the N14 and N18 eninge found in the Mini Cooper S Turbo, Citroen DS3 1.6 Turbo, Peugeot 207 GTi, Peugeot 208 GTi and Peugeot RCZ THP156 and THP200. This adaptor utilises the (MAP) pressure sensor on the inlet manifold under the airbox. Simply remove the existing sensor, fit our adaptor and refit the original sensor into our adaptor. You will then have a vacuum / boost connection suitable for 4mm tube or similar that can be used to install a boost gauge

Read more less

Boost gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines found in many new vehicles including the Golf Mk7, Audi S1, Audi S3 (8V chassis), Seat Leon Cupra 280 etc… This adaptor installs between the boost (MAP) sensor and the inlet manifold. Simple 5 minute install to give you a vacuum / boost connection suitable for installing a boost gauge or dump valve. Our design allows you to refit the original engine cover after installation and is totally reversible.

Read more less

Forge Motorsport Boost Tap for the Ford Mustang 2.3 Ecoboost and the Mk3 Focus RS. This adaptor plate is installed between the boost (MAP) sensor and the mounting surface. This allows a tap to run a vacuum operated valve or for connection to a boost gauge.   In the box:1 x Vacuum tap1 x Allen Cap Bolt10 x Cable Ties1 x 3000mm of 4mm Vacuum Tube

Read more less

Product Description This only fits vehicles from 2022 onwards This adaptor installs in between the intake manifold elbow and the vacuum pipe coming from it. Behind the two pipes circled below. Please check this before ordering as you may require FMBGFK21 A simple solution requiring no tools for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible. For this type of engine with the vacuum source here, this kit is required If your engine has the vacuum source in this location you will require FMBGFK21   In the Box:AdapterRetaining ClipSplit SleeveCable ties (x10)2 metres of 4mm Vacuum Hose Check your vehicle compatibility: Click here

Read more less

This adaptor plate installs between the boost (MAP) sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection to a boost gauge.   In The Box:1 x Vacuum Tap2 x M6 x 35 Socket Cap Bolts2 x M5 x 35 Self Tapper Screws1 x Instructions1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Forge Motorsport Boost Tap Kit for Audi TTRS 8S and Audi RS3 (DAZA Engine Codes) as well as BMW's with part number 13627843531 The adaptor in this kit is machined from solid billet and offers two additional ports. One port including pipe fitting can be used for a dump valve or boost gauge to be fitted, the second port will accept a 1/8” NPT fitting which can be used for water meth. Two plugs are included allowing one or both ports to be blanked off at any time. No modifications are required to OE parts making the install fully reversible. Hardware, including fitting instructions are supplied. In the Box:Boost tap adapterPipe fittings2x PlugsInstructions   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Audi 2.0T FFV Boost Gauge Fitting Kit Another unique design by Forge Motorsport. This boost tap will fit the FFV (Flexible Fuel Vehicles) including the Audi A4, A5 and Q5. This part allows easy fitment of a boost gauge, water meth pressure sensor or a dump valve to the 2.0T engine. The boost tap itself can be installed without tools in under 10 minutes and is fully reversible should you ever wish to remove it.  Complete with installation instructions. This is also referred to as the Audi B8.5 boost tap but will not fit all B8.5 vehicles, to further help identify if this will fit the 2.0T you have, please see the engine bay picture.   Application List 2012-on Audi A4,A5 and Q5 with the 2.0 petrol turbo engine The part fits many engines within these years. They are ‘FFV’ or ‘Flexible Fuel Vehicles’. To double check, all of the FFV’s have  a sticker inside the petrol cap saying ‘E85 compatible’ . They should also have ‘E85/Gasoline’ written on the petrol cap itself. The final check is that all the FFV’s have a metal intake manifold rather than plastic.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

For all those wishing to install a boost gauge to their 2.0 litre FSiT engines (suitable for all VAG TSI and FSI turbo engines)A CNC inline take off, which is installed on to the inlet manifold, and allows up to three connections to be made if required. These are available in Black anodised finish only.   In The Box:1 x 1mm Vacuum Port1 x 2mm Vacuum Port1 x 3mm Vacuum Port8 x Cable Ties1 x Horse Shoe Clip3 x M6 x 6 Grub Screws1 x 2000mm x 4mm Vacuum Tube1 x Instructions1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FITS MULTIPLE VEHICLES

Read more less

Product Description This adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost). Simply remove the existing sensor, fit the Forge Motorsport adaptor and refit the original sensor to the adaptor. This provides a take-off port to connect a vacuum operated valve or a boost gauge without having to cut into any original equipment.  Vacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.   Compatible with the following MAP sensors: 0 281 002 996 0 281 002 566 55219295 55209194   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less