30% OFF ALL REVO SOFTWARE IN MARCH. USE CODE *MODMARCH* AT CHECKOUT - INSTALL IN OUR BRADFORD HQ - click here

Forge Motorsport Shop

1066 products

  • Forge Motorsport Intake for the Ford Fiesta 1.0 Ecoboost - Car Enhancements UK

    forge Motorsport Forge Motorsport Intake for the Ford Fiesta 1.0 Ecoboost

    Forge Motorsport FMINDK5 – Fiesta 1.0 Ecoboost intake The 1.0 Ecoboost engine runs a small turbocharger so the key to releasing power from the engine is minimising restriction, which is exactly what the Forge motorsport intake does. Featuring a fully CNC machined MAF housing and pipe that matches the standard Ecoboost housing exactly, coupled to a large Pipercross airfilter, the Forge Motorsport Ecoboost intake looks as good as it sounds, with a noticeable increase in induction and dump valve recirculation noise. The kit comes complete with all parts necessary to fit, including a large heatshield in order to reduce inlet temperatures. Full instructions are included.

    £178.82

  • Intake for the Ford Fiesta ST180 - Car Enhancements UK

    forge Motorsport Intake for the Ford Fiesta ST180

    The Forge Motorsport intake system for the Ford Fiesta ST180 features a large diameter Pipercross pleated filter for superior filtration and enhanced breathing for the engine – but also featuring a larger surface area than the stock filter and many competitors. The MAF housing is CNC machined in our Gloucester machine shop and gently tapered internally so as to ensure maximum flow whilst emulating the stock configuration to eliminate the possibility of any engine check lights. We also provide a laser cut and powder coated aluminium shield which sits under the filter and directs air around the filter that enters the bay through the bonnet slam panel. During testing we have achieved gains of up to 11bhp when installed in conjunction with an engine remap, which is generally needed in order to make the most of the improved airflow. This filter kit can also be installed in conjunction with the Forge Motorsport inlet pipe, which is sold separately. 

    £173.76 - £263.57

  • Recirculating Dump Valve for Ford Fiesta ST 180 Mk7 - Car Enhancements UK

    forge Motorsport Recirculating Dump Valve for Ford Fiesta ST 180 Mk7

    This Recirculating valve is for the turbocharged 1.6-litre EcoBoost petrol engine found in the Fiesta ST. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.    In The Box:1 x FMDVST180 Valve1 x FMBGFK4 Boost Tap and Bolt1 x Solenoid, Bracket and Screws1 x Blue Spring (Uprated)1 x Wiring Harness2 x Posi-taps10 x Cable Ties1 x 2000mm Length of 4mm Vacuum Hose1 x Forge Key Ring and Sticker1 x Instruction Booklet

    £247.10

  • Induction Kit for the 1.2/1.4 TSI 2015 Onwards - Car Enhancements UK

    forge Motorsport Induction Kit for the 1.2/1.4 TSI 2015 Onwards

    The Forge Motorsport intake for the 2015-on 1.2 & 1.4 TSI removes the restriction of the stock airbox and replaces it with a silicone hose (available in a choice of colours) and free flowing Pipercross cone filter, which offers superior filtration to the stock paper filter. The kit is supplied with everything you need, including instructions for installation. Please note: This will not fit CZE engine with cam breather at the back of the engine *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* For replacement filter please click here: Please watch our video on how to fit an air filter without damaging it.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £218.88

  • Inlet Hose for Ford Fiesta ST180 - Car Enhancements UK

    forge Motorsport Inlet Hose for Ford Fiesta ST180

    This inlet pipe for the Ford Fiesta ST180 fits between the air filter and turbo inlet pipe and is a highly visible component of the engine bay, accordingly its available in red, blue and black. Its fully compatible with either the stock filter box or the Forge Motorsport ST180 intake  Unlike the stock Ford hose, this inlet hose maintains a constant internal diameter to ensure a smooth flow of air to the turbo, which owners have commented makes the car more lively to drive.  Our High grip hose clamps are included with this product. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

    £98.74

  • Induction Kit for the SEAT Ibiza 1.2 TSi - Car Enhancements UK

    forge Motorsport Induction Kit for the SEAT Ibiza 1.2 TSi

    This induction kit will ensure that your engine can breath freely and maximise any restictions from the OEM air box and filter. The silicone inlet hose is available in a choice of either red, blue or black. The filter itself has been deigned in conjunction with the engineers at Pipercross who are well respected in the motorsport scene especially with the Touring car championship race teams. Everything you require is supplied in the kit with comprehensive instructions. PLEASE NOTE: This will only fit the 1.2 engine with engine code CBZA and CBZB

    £206.75

  • Turbo Actuator for Ford Focus ST - Car Enhancements UK

    forge Motorsport Turbo Actuator for Ford Focus ST

    This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACST Actuator1 x Forge Sticker

    £198.74

  • Ford Fiesta 1.0T Ecoboost De-Resonator Hose - Car Enhancements UK

    forge Motorsport Ford Fiesta 1.0T Ecoboost De-Resonator Hose

    Product Description: De-resonator induction hose for the 1.0 Ecoboost. This Forge Motorsport silicone induction hose will fit both the Ford Fiesta Mk7 and Focus Mk3 1.0 Ecoboost engines. It is not just a visual improvement to the engine bay, but features a smooth internal bore offering less restriction to the turbocharger than the OEM resonator pipe. This means increased airflow to the engine and enhanced induction noise. This hose is available in red, blue and black with stainless steel hose clamps.    The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

    £85.19

  • Blow Off Valve and Kit for Audi, VW, SEAT, and Skoda 1.2 TSI - Up to 2015 - Car Enhancements UK

    forge Motorsport Blow Off Valve and Kit for Audi, VW, SEAT, and Skoda 1.2 TSI - Up to 2015

    Yet another first for Forge Motorsport! This valve kit allows the fitment of a fast response blow off valve on the 1.2 TSi engine CBZA, CBZB and CBZC as found in the Seat Ibiza, Toledo, Altea, Leon, the VW Polo, Caddy, New Beetle, Jetta, Touran, Golf, the Skoda Yeti, Fabia, Octavia, and the Audi A1 and A3. As the engine does not have a diverter valve fitted as standard, this valve not only gives you an incredible loud sound when lifting off the throttle during gear changes, but will also improve the throttle response by reducing any lag, as it will help the turbocharger maintain its rotational speed ready for when you accelerate. Please select the valve and hose colours using the options above.   In The Box:1 x FMDV12VAG Valve1 x Vacuum Tap, Gasket and Screws2 x M6 x 16 Socket Cap Screws1 x Machined Aluminium Coupler1 x Uprated Blue Spring2 x Cable Ties1 x Silicone Hose2 x Hose Clamps1 x Instructions1 x Forge Sticker

    £230.54

  • Forge Motorsport Direct Fit Piston Recirculation Valve - Focus MK2 & MK3 - Car Enhancements UK

    forge Motorsport Forge Motorsport Direct Fit Piston Recirculation Valve - Focus MK2 & MK3

    This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm valves (OEM) but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation the top or vacuum connection is angled. This part first the Ford Focus ST225 and ST250   In The Box:1 x FMDVK04S Valve1 x Uprated Yellow Spring1 x Forge Sticker

    £161.66

  • Inlet Hose for the Fiesta 1.0 EcoBoost - Car Enhancements UK

    forge Motorsport Inlet Hose for the Fiesta 1.0 EcoBoost

    This Forge Motorsport silicone inlet hose is for the Ford Fiesta 1.0 Ecoboost. Not just a visual improvement to the engine bay but features a smooth internal bore offering less restriction than the OEM part. This hose is available in red, blue and black with or without stainless steel hose clamps. Please choose from above.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.

    £77.87 - £83.94

  • Forge Atmospheric Dump Valve for Ford Fiesta ST 180 Mk7 - Car Enhancements UK

    forge Motorsport Forge Atmospheric Dump Valve for Ford Fiesta ST 180 Mk7

    This valve is for the turbocharged 1.6-litre EcoBoost petrol engine found in the Fiesta ST. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible.    In The Box:1 x FMDVST180 Valve1 x FMBGFK4 Boost Tap and Bolt1 x Solenoid, Bracket and Screws1 x Blue Spring (Uprated)1 x Wiring Harness2 x Posi-taps10 x Cable Ties1 x 2000mm Length of 4mm Vacuum Hose1 x Forge Key Ring and Sticker1 x Instruction Booklet

    £244.71

Login

Forgot your password?

Don't have an account yet?
Create account