Oil Catch Cans

AIRTEC Motorsport oil catch can for Fiesta ST180. Essential upgrade for any direct injected car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, preventing a build up of carbon. One of the only kits designed with a dipstick allowing you to check your oil level! Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit. Features: Baffled oil catch can Oil level dipstick 2x Pro Hoses silicone hoses Step by step fitting guide Helps reduce carbon build-up on intake valves

Read more less

TECHNICAL DATA AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves One of the only kits designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit Features: Baffled oil catch can Oil level dipstick x2 Pro Hoses silicone hoses Step by step fitting guide Helps reduce carbon build up on intake valves WILL fit with AIRTEC induction shield in place. Only available in Pro-Series Black! Registered Design Right number: AIRTEC Part No: ATMSFO112

Read more less

Tuning levels on the Focus RS & ST have pushed the standard Ford oil filter housing to its limit, with the fagile diaphragm inside these housings splitting and also leaking due to the clip on design, a upgraded breather system was required, the AIRTEC Motorsport two-piece breather kit ticks all the boxes and more... The AIRTEC Motorsport two-piece breather kit includes the following: 1 x Modified & Baffled Ford oil filter housing, includes new oil filter element and oil seals for no fuss fitting 1 x AIRTEC Motorsport oil separator with billet mounting block and laser cut fitting washer that also doubles up as a template when drilling to attach separator to battery tray 5 x Pro Hoses oil resistant fluorosilicon lined hoses, custom made to fit your engine bay, far superior fitting than straight hoses and available in various colours to match your engine bay. Complete with full stainless steel chunky jubilee clips, very minor trimming of hoses may be required.  1 x Mini breather and alloy joiner, this attaches to bottom of oil separator hose which runs down back of engine and secures to the gearbox with a modified stainless 'P' clip, its positioned so any engine fumes exit underneath the floor pan   Exchange - we require your old oil filter housing before sending 2 piece breather kit. Once you have purchased, a kit will be allocated for you, when we have received your old ford oil filter housing we can send your new 2 piece AS breather kit Outright - you will receive full kit & if you wish to return your old oil filter housing we will refund you £149. This is good for international customers that can't send their old unit back & customers that wish to fit first and then return after installation Other colour hoses are available please state when ordering Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)

Read more less

As part of our expanding Audi product range, AIRTEC Motorsport is proud to launch our S1 oil catch can upgrade suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the S1 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features:  Kit developed specifically for the S1 Easy, direct fitment Internal baffle and dipstick Powder coated black finish Billet machined bracket Comprehensive fitting guide   AIRTEC part no: ATMSVAG15

Read more less

TECHNICAL DATA As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our oil catch can kit for the N55 engine fitted in the BMW M135i, M235i & M2 non-Competition for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the BMW M models utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in anodised matt black, which allows the catch can to attach neatly in place. The can itself features an internal micron filter, baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the BMW N55 platform Helps to prevent build-up of oil residue in the intake system Maintains optimum engine performance Easy maintenance to check oil level and drain tank Simple direct fit Billet machined bracket Comprehensive fitting guide AIRTEC Part No: ATMSBMW2

Read more less

As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade suitable for track or fast road use. AIRTEC part no: ATMSHYU4 TECHNICAL DATA As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the i20N model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the i20N Easy, direct fitment Internal baffle and dipstick Powder coated black finish Billet machined bracket Comprehensive fitting guide Registered Design Right number: AIRTEC part no: ATMSHYU4

Read more less

AIRTEC Motorsport Oil Catch Can Kit for BMW M3/M4 & M2 Competition   We’re proud to launch our oil catch can kit for the S55 engine fitted in the BMW M3/M4 & M2 Competition for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC part no: ATMSBMW2 AIRTEC Motorsport Oil Catch Can Kit for BMW M3/M4 & M2 Competition   We’re proud to launch our oil catch can kit for the S55 engine fitted in the BMW M3/M4 & M2 Competition for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the BMW M models utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in anodised matt black, which allows the catch can to attach neatly in place. The can itself features an internal micron filter, baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the BMW S55 platform Easy, direct fit Billet machined bracket Comprehensive fitting guide

Read more less

We’re proud to launch our oil catch can kit for the Toyota Yaris GR for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. TECHNICAL DATA AIRTEC Motorsport Oil Catch Can Kit for Toyota Yaris GR   We’re proud to launch our oil catch can kit for the Toyota Yaris GR for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Yaris model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated matt black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. An catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the Yaris GR Easy, direct fit Billet machined bracket Comprehensive fitting guide AIRTEC part no: ATMSYGR02

Read more less

TECHNICAL DATA AIRTEC Motorsport PUMA MK2 ST 1.5 EcoBoost Engine Breather Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves One of the only kits designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit Features: Baffled oil catch can Oil level dipstick x2 Pro Hoses silicone hoses Step by step fitting guide Helps reduce carbon build up on intake valves WILL fit with AIRTEC induction shield in place. Only available in Pro-Series Black! Registered Design Right number: AIRTEC Part No: ATMSFO112

Read more less