Performance - Golf MK7

Racingline Sport Lowering Springs VW Golf Mk7 GTI/SEAT Leon Mk3 Cupra – VWR31G7GT Lowering Range:20-25mm Front and Rear Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR31G7GT

Read more less

The Racingline Performance High Flow Turbo Inlet has been engineered as a simple upgrade to significantly increase air flow into the turbocharger. It’s the perfect complement to either our R600 Cold Air Intake, the standard airbox or indeed any other aftermarket intake system. A simple fitment, the Racingline Performance High Flow Turbo Inlet is a large diameter, free flowing intake elbow, CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet. Without it the potential of any high flow intake system is wasted because any smooth flowing intake charge has to taper down to pass through the tight and restrictive bend of the factory part. The result? Back-to-back comparisons against the factory elbow on our flow bench reveals an impressive improvement in airflow.We’ve seen some surprisingly significant power and torque increases from the fitment of the Racingline Performance High Flow Turbo Inlet as a result of the faster turbo spool and increased airflow it generates. It’s also possible to hear an enhanced sound from the turbo which comes as another benefit for any enthusiast. Notes:If you are planning to use this item on an Ibiza 1.8TFSI, Polo 1.8TFSI or Audi S1 2.0TFSI – You will need to purchase an additional PCV Breather Pipe.The part number for this is:06K 103 213A and it can be ordered from your local main dealer. Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. ​ MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Audi S3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Racingline Stage 2 ‘EVO’ MQB Golf 7/8, S3, Cupra Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Golf 8 2020+> VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi A3 8Y 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TSI 8V evo 2017-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi TTRS 3 2.5 TFSI 8S 2017+> Audi SQ2 2018+> Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+> SEAT Leon IV FW 2020+> SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 5F 2015-2020> Cupra Ateca 2018+> SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Octavia IV NX 2020+> Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

Racingline Stage 3 Monoblock Big Brake Kit – MQB Platform After almost a year of test and development work, the much-anticipated ‘Stage 3’ Big Brake Kit is now available in four colours and two rotor sizes for 18″/19″ wheels. Boasting a forged monoblock caliper, designed by us from the ground up using the latest FEA Technology we think it’s easily the most dramatic big brake kit on the market – but more importantly it performs like no other. With incredibly stiff monoblock construction, and the highest burst-pressure test ever recorded by Racingline’s development team, it’s no wonder that record 100kph-0 times are being produced. The Racingline Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.The design vision was made possible by an advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing. Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. Technical Specs Fully-Floating Disc Heat treated FC-25 two-piece Steel Carbon Rotors 355mm rotors (18” wheels) 380mm rotors (19” wheels) Sprung floating hardware for near silent running Vented ‘Triple Groove’ discs with break-in-surface as standard Fast road – Pad supplied with factory pad wear sensor AP pad shape for multiple pad options Goodridge ISO, TUV DOT and ADR approved lines Racingline’s hub adaptor system What’s in the Kit? – Monoblock Front Brake Calipers (Pair)– Caliper Mounting Brackets (Pair)– Full Mounting Bolt Kit– Braided Steel Front Brake Line Set– Sport Brake Pad Set (Fast Road Use)– 380mm Fully Floating 2 Piece Brake Discs (Pair) Notes – 380mm kit will fit under 18″ Alloy Wheels– Factory 19″ wheels and other brands may require spacers– Racingline and Revo 19″ wheels will not require Spacers Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Audi RS3 (8V) 2015-present Audi S3 (8V) 2012-present Audi TT (8S) 2014-present Audi TT RS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Arteon (2017-present) Volkswagen Golf Mk7 2012-present

Read more less

MQB (Multi-Link) Spring and Damper Kit When it comes to sport dampers the compromise between performance and comfort has been a persistent dilemma for keen drivers and enthusiasts. With the RacingLine Performance Sport Damper kit, which consists of two front and two rear shocks, this dilemma becomes a thing of the past for Golf 7 Platform cars at an affordable price. Fitting the RacingLine Performance Sport Damper kit ensures superior road-holding and a positive transformation in handling characteristics without compromising comfort. Our Sport Dampers are designed to maximise comfort and performance on all road conditions, and driving styles; guaranteeing greater stability, control and therefore driving pleasure. This kit has been designed to work in harmony with RacingLine Performance Sport Springs. In tandem, these upgrades provide the ultimate in handling and comfort. These two upgrades really do make the perfect combination for your car. This kit will fit the following vehicles with a 55mm Front Strut and Multi-Link Rear Suspension only:* Volkswagen Golf Mk7* Audi A3 8V* SEAT Leon Mk3* Skoda Octavia Mk3 Notes: – Not suitable for Audi S3– Not suitable for cars with Mag-Ride/DCC Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Racingline R600 Carbon Fibre Intake Lid – Gloss/Matte Finish Transform your engine bay with the addition of a true R600 carbon fibre lid. Confirmed Fitment Suitable for existing R600 Intake part numbers; VWR12G7R600 VWR12G7R601 VWR12G7R600E VWR12G7R601E Not suitable for EA888 Gen.4 Engine Vehicles – e.g. S3 8Y, Mk8 Golf R, Cupra Leon Mk4. Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

Racingline Silicone Boost Hose Kit for MQB EA888 Gen.3 – VWR140004 The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.The kit is a direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our five-piece kit. Simple. Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus other non-stepped designs.  Of course our kit is pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions.By minimising these restrictions, the smoother airflow and optimised hose routing ensures that the turbo meets less resistance and can thus perform more effectively – moving a larger volume of air and minimising turbulence.The RacingLine Boost Hose Kit is probably the only one on the market which comes with five hoses included – although you will only need to fit four of them.The choice of which Turbo Outlet Pipe (bottom) depends whether the car is pre- or post-2017. It’s really easy to choose which to use:  it’s either long or short depending on what OEM pipe is removed, meaning that (unlike other kits) you can’t really get this wrong!  Designed to work in perfect harmony with the Racingline MQB Intercooler Compatibility > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 1.8 TSI 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8V 2013-2020> Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 1.8 TSI 5F 2014-2020> SEAT Ateca Cupra 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR140004

Read more less

Racingline Performance ‘R360’ 19″ Alloy Wheels The R360 takes all the attributes of our race wheels of strength, lightness and the peace of mind of UK manufacture – then adds in a large helping of style. Three luxurious finishes://  Gunmetal Grey//  Star Silver// Gloss Black *NEW* At 10.5kg, 23.15lb, each R360 weighs up to 2kg less than the OEM wheels. Produced to the highest specification in the UK to meet (and exceed) OEM standards and the reassurance of full TÜV international approval. Combining lightness, strength and a stunning OEM+ inspired 10 spoke design finished in a gloss gunmetal finish. Technical This 19″x 8.5″ rim has an offset of ET44. That’s perfect for all Golf 7 and other MQB-platform cars, together with the A5-platform cars (such as Golf 5/6 ) and other 5x112pcd VWG vehicles.  It looks simply perfect on these models, filling the arches to perfection. We recommend a tyre size of 235/35 R19 for these wheels to maintain wheel arch clearance.  Note that for Golf 5/6 applications, where arch clearance is tight we would recommend a 225/35 R19 tyre. Notes:* 8.5J x 19″* 5 x 112 PCD* ET44 Offset* Sold as a Set of 4x Alloy wheels* Also available individually – contact usfor details* Tyres not included but available as an extra – contact us for details Precision Engineering Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR600360GUN

Read more less

Racingline Performance Stainless Steel Braided Brake Line Set The ideal first upgrade for your Stock Braking System Racingline Performance Stainless Steel Brake Lines are engineered to replace the standard brake lines with a harder wearing hose that is less prone to expansion under high temperatures.These will not only give a better pedal feel than the standard brake lines, but also last much longer. Compatible with all DOT4 and Performance Brake Fluids This Kit consists of:– 2x Front Brake Lines– 4x Banjo Washers Notes:– You will need to re-use your standard Banjo Bolts Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR69G7FR

Read more less

The Racingline Performance Intercooler System is the best performing intercooler upgrade on offer for the MQB-platform Golf 7 GTI, R and Audi S3 as well as all the other vehicles based on the same platform; with proven race championship performance to back that up. The factory intercooler has shown itself to be unable to cope with the demands of higher power, hard driven cars. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again without the recovery cool-down times needed for the production intercooler. The giant 56mm core depth of the system uses careful optimised fin design, delivering the sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. The Racingline Performance Intercooler System is a direct bolt-on replacement for the stock intercooler. It really is essential for every stage of tuning on any high performance MQB-platform car Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

REAR BODY BRACE Want to sharpen up your Golf 7 & 7.5 handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. WHAT DOES IT DO? Modern cars like the Golf 7 & 7.5 run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That's why the Clubsport S Golf gets a factory rear brace.  The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together. The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis. By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do. Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible. Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace. LOW PROFILE Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation. EASY INSTALL/REMOVE Clever design means fitting is quick and simple. Completely reversible without trace for removal.  NO DRILLING No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify. PRACTICAL Compatible with rear seats up or down, and we've even added in the luggage tie-downs into the mounting points. LIGHTWEIGHT A ruthless approach to weight-saving. Billet aluminium mounting brackets bonded to ultra stiff 3K twill carbon link bars. ADJUSTABLE Every mass-produced car body has small differences in dimensions. The brace is tensioned after fitment for ultra-tight alignment to your car. Confirmed Fitment Golf Mk7 Hatch Golf Mk7.5 Hatch Golf Mk7 Estate Golf Mk7.5 Estate  

Read more less

Racingline Adjustable Rear Droplinks MQB/MQB Evo – VWR520000 Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements. Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier. Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. Vehicle FItment – VW Golf Mk8 2020+– VW Golf Mk7 & Mk77.5 2013-2020– VW Passat B8 2015+– VW Arteon 2017+– VW T-Roc 2017+– VW Tiguan II 2016+– Audi S3 8Y 2020+– Audi A3 8Y 2020+– Audi S3 8V 2013-2020– Audi A3 8V 2013-2020– Audi RS3 2.5 TSI 8V 2017-2020– Audi TT 3 8S 2014+– Audi TTRS 8S 2017+– Audi SQ2 2018+– Audi RSQ3 F3 2019+– Audi Q3 2019+– Audi Q2 2017+– Cupra Leon IV FW 2020+– SEAT Leon III 5F 2015-2020– Cupra Ateca 2018+– Cupra Formentor 2020+– SEAT Tarraco 2018+– Skoda Octavia IV NX 2020+– Skoda Octavia III 5E 2014-2020– Skoda Superb III 3V 2015+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR520000

Read more less