Performance - Golf MK8 All Models

The Racingline Performance Intercooler System is the best performing intercooler upgrade on offer for the MQB-platform Golf 7 GTI, R and Audi S3 as well as all the other vehicles based on the same platform; with proven race championship performance to back that up. The factory intercooler has shown itself to be unable to cope with the demands of higher power, hard driven cars. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again without the recovery cool-down times needed for the production intercooler. The giant 56mm core depth of the system uses careful optimised fin design, delivering the sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. The Racingline Performance Intercooler System is a direct bolt-on replacement for the stock intercooler. It really is essential for every stage of tuning on any high performance MQB-platform car Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

As part of our expanding VAG product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the MQB Evo engine (300-320ps), suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original pipework to allow more flow and capacity whilst reducing restriction and improving response. The comprehensive 8-piece kit features three pipes constructed from lightweight aluminium for improved strength so they will not fail with higher boost pressure as well as five Pro Hoses silicone joiners/hoses to make fitting as simplistic as possible. For the cold side from the intercooler to the throttle body, the original pipework begins at 60mm and tapers to 58mm in diameter, but our replacement features a 70mm internal diameter throughout until it meets the throttle body, increasing both flow and capacity. On the hot side coming from the turbo to the intercooler, the original pipework measures 60mm where as our kit features a 63mm internal diameter from start to finish with no restrictions. It also does away with the original resonator, which VW fits to reduce noise but removing it improves flow, capacity and noise. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. A must have for any modified Mk8 Golf R models to help the improve the boost pipework’s flow and efficiency. ONLY FITS WITH AIRTEC MOTORSPORT INTERCOOLER UPGRADE Dimensions:OEM COLD SIDE PIPE: 60mmCross sectional area: 2,827mm² AIRTEC MOTORSPORT COLD SIDE PIPE: 70mmCross section area: 3,848.5mm²36% bigger in cross sectional area OEM HOT SIDE PIPE: 60mmCross sectional area: 2,827mm² AIRTEC MOTORSPORT HOT SIDE PIPE: 63mmCross sectional area: 3,117.2mm²10% bigger in cross sectional area Fitment:Audi S3 8Y – 2020 onwardsCupra Leon Mk4 300 TSI FW – 2020 onwardsVW Golf Mk 8 GTI Clubsport – 2020 onwardsVW Golf Mk8 R – 2020 onwards Features: Comprehensive 8-piece kit designed specifically for the Mk8 Golf R Larger internal diameter pipework offers improved flow 36% larger cross sectional area on cold side pipework 10% larger cross sectional area on hot side pipework Lightweight aluminium construction for increased strength High quality Pro Hoses silicone connectors Comes complete with all fixtures and fittings Fitting instructions included AIRTEC Part No: ATMSVAG9

Read more less

+5.8hp / + 15.2nm Intake temps reduced by 28°c Temperature drop of 101.7°c (75%) 66% larger than stock Designed using state of the art CAD and CFD modelling software Black coating improves heat dissipation properties Direct replacement for the original intercooler TIG welded for maximum strength and durability   MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power.   Test car: Volkswagen Golf MK7 R 2.0 TSI 336.6hp /418.1nmPut through its paces on a state-of-the-art Maha MSR 500 Dyno, our Multi Vane Technology Intercooler for the MQB platform yielded some highly impressive results. After installing our revolutionary MVT Intercooler, engine performance improved significantly. With the MK7 now producing 342.4hp & 433.3nm of torque, that’s an increase of +5.8hp & 15.2nm of torque without any additional tuning. What’s more impressive is the cooling power of MVT. Using sophisticated data logging software, we measured stock intake temperatures at 64°c. With MVT, intake temperatures dropped by 28°c! Thus, providing huge tuning potential and greater reliability when combined with a remap & supporting modifications. The perfect addition to any track or modified road car! We also went one step further by placing temperature probes into the inlet and outlet of the Intercooler. This allows us to accurately compare the difference in temperatures as the charged air passes though the core. Data for the stock intercooler showed us charged air temperatures dropped from 134.4°c(inlet) to 57.8°c(outlet). However, this figure was reduced down to 32.7°c(outlet) thanks to the efficiency of our MVT Intercooler. Providing an overall temperature drop of 101.7°c.  Intercooler Core SizeOEM: 36mm x 409mm x 619MVT: 60mm x 409 x 619 Fitment Volkswagen Golf R MK8 2.0TSI 2019+ models  

Read more less

A direct replacement for the standard part, Direnza radiators feature twin-core technology for optimised cooling capability. Constructed from aircraft grade aluminium (a material well-known for its excellent thermal conductivity), our radiators are the perfect addition to any car, including those driven hard on track. Designed and developed in-house by Direnza engineers, our radiators provide as much as 40% additional cooling capacity compared with standard radiator systems, their robust yet intricate design, and exceptional cooling performance a testament to our R&D processes. Direnza radiators are TIG-welded for additional strength and durability. TIG welding also provides a more precise finish than MIG welding, and reduces stress on the material at hand. Our radiators will enhance the appearance of any engine bay. Fitment VW Golf MK7 / MK8 2.0 R TSI 2013+ modelsAudi S1 8X 2014-2018 modelsAudi S3 8V Quattro 2013+ modelsAudi S3 8Y Quattro 2020+ modelsAudi TTS FV 2.0 2013+ modelsSeat Leon 1.8 TSI / 2.0 Cupra 2013+ models Core Length (mm) 220 Core Width (mm) 200 Core Height (mm) 40

Read more less

A direct replacement for the standard part, Direnza radiators feature twin-core technology for optimised cooling capability. Constructed from aircraft grade aluminium (a material well-known for its excellent thermal conductivity), our radiators are the perfect addition to any car, including those driven hard on track. Designed and developed in-house by Direnza engineers, our radiators provide as much as 40% additional cooling capacity compared with standard radiator systems, their robust yet intricate design, and exceptional cooling performance a testament to our R&D processes. Direnza radiators are TIG-welded for additional strength and durability. TIG welding also provides a more precise finish than MIG welding, and reduces stress on the material at hand. Our radiators will enhance the appearance of any engine bay. Fitment VW Golf MK7 / MK8 2.0 R / TSI / GTD / GTI 2013+ models.VW Passat 1.8 / 2.0 TSI 2015+ models.VW Tiguan 2.0 TSI 2016+ models.VW T-Roc 2.0 TSI 2017+ models.Audi S3 + A3 1.8 / 2.0 / TFSI 2013+ models.Audi TT 1.8 / 2.0 TFSI 2015+ models.Seat Leon 1.8 TSI / 2.0 Cupra 2013+ models.Skoda Octavia 1.8 / 2.0 TSI 2013+ models.Skoda Superb 1.8 / 2.0 TSI 2013+ models. Product Category Intercooler / Radiator Part Number DZRA093 Intercooler / Radiator - Core Height (mm) 430mm Intercooler / Radiator - Core Length (mm) 675mm Intercooler / Radiator - Core Width (mm) 40mm Intercooler / Radiator - Inlet Size (mm) 32 Push Fit Intercooler / Radiator - Outlet Size (mm) 32 Push Fit Intercooler / Radiator - Overall Height (mm) 450

Read more less

A direct replacement for the standard part, Direnza radiators feature twin-core technology for optimised cooling capability. Constructed from aircraft grade aluminium (a material well-known for its excellent thermal conductivity), our radiators are the perfect addition to any car, including those driven hard on track. Designed and developed in-house by Direnza engineers, our radiators provide as much as 40% additional cooling capacity compared with standard radiator systems, their robust yet intricate design, and exceptional cooling performance a testament to our R&D processes. Direnza radiators are TIG-welded for additional strength and durability. TIG welding also provides a more precise finish than MIG welding, and reduces stress on the material at hand. Our radiators will enhance the appearance of any engine bay. Fitment VW Golf MK7 / MK8 2.0 R TSI 2013+ modelsAudi S1 8X 2014-2018 modelsAudi S3 8V Quattro 2013+ modelsAudi S3 8Y Quattro 2020+ modelsAudi TTS FV 2.0 2013+ modelsSeat Leon 1.8 TSI / 2.0 Cupra 2013+ models Core Length (mm) 220 Core Width (mm) 200 Core Height (mm) 40

Read more less

A direct replacement for the standard part, Direnza radiators feature twin-core technology for optimised cooling capability. Constructed from aircraft grade aluminium (a material well-known for its excellent thermal conductivity), our radiators are the perfect addition to any car, including those driven hard on track. Designed and developed in-house by Direnza engineers, our radiators provide as much as 40% additional cooling capacity compared with standard radiator systems, their robust yet intricate design, and exceptional cooling performance a testament to our R&D processes. Direnza radiators are TIG-welded for additional strength and durability. TIG welding also provides a more precise finish than MIG welding, and reduces stress on the material at hand. Our radiators will enhance the appearance of any engine bay. Fitment VW Golf MK7 / MK8 2.0 R / TSI / GTD / GTI 2013+ models.VW Passat 1.8 / 2.0 TSI 2015+ models.VW Tiguan 2.0 TSI 2016+ models.VW T-Roc 2.0 TSI 2017+ models.Audi S3 + A3 1.8 / 2.0 / TFSI 2013+ models.Audi TT 1.8 / 2.0 TFSI 2015+ models.Seat Leon 1.8 TSI / 2.0 Cupra 2013+ models.Skoda Octavia 1.8 / 2.0 TSI 2013+ models.Skoda Superb 1.8 / 2.0 TSI 2013+ models. Product Category Intercooler / Radiator Part Number DZRA093 Intercooler / Radiator - Core Height (mm) 430mm Intercooler / Radiator - Core Length (mm) 675mm Intercooler / Radiator - Core Width (mm) 40mm Intercooler / Radiator - Inlet Size (mm) 32 Push Fit Intercooler / Radiator - Outlet Size (mm) 32 Push Fit Intercooler / Radiator - Overall Height (mm) 450

Read more less

Developed at AIRTEC HQ in the UK, we’re proud to launch our uprated front mount intercooler kit aimed at EA888 Gen 4 platform owners who want the very highest level of cooling efficiency, power and performance for track or fast road use. Available in a high-quality powder coated black finish, the comprehensive kit is a direct replacement and comes with new Pro Hoses silicone boost pipes. It also comes complete with all fixtures and fittings, as well as detailed fitting instructions. AIRTEC Part No: ATINTVAG45 TECHNICAL DATA Developed at AIRTEC HQ in the UK, we’re proud to launch our uprated front mount intercooler kit aimed at EA888 Gen 4 platform owners who want the very highest level of cooling efficiency, power and performance for track or fast road use.   The DesignLeading on from the huge success of our EA888 Gen 3 platform intercooler kit that has proven itself the go-to option on numerous big power builds for the last 7 years, when it came to developing our kit for the EA888 Gen 4 platform we knew exactly which way to go. With very similar size restrictions to its predecessor, we utilised our huge 16.4-litre capacity core from the EA888 Gen 3 platform and integrated it to better accommodate the air-con radiator. This allowed an impressive 80% increase in overall capacity in comparison to the original intercooler, as well as an increase in frontal area to make the most of the air flow provided. Together with our cast end tanks to ensure optimum air flow both in and out of the intercooler, the moulded one-piece designs ensure flow is directed correctly and efficiently. Available in a high-quality powder coated black finish, the comprehensive kit is a direct replacement and comes with new Pro Hoses silicone boost pipes. It also comes complete with all fixtures and fittings, as well as detailed fitting instructions.   Its proven cooling efficiency increase makes it an essential modification for all modified EA888 Gen 4 platform models.   TESTEDAmD Tuning dynoStandard Intercooler                                      AIRTEC Motorsport Intercooler Power336.1bhp – 350.9 lb ft of torque          371.8bhp – 352.9 lb ft of torque TemperaturesRun 1IN – 115 degrees                                     IN – 116 degreesOUT – 44 degrees                                OUT – 18 degrees Run 2IN – 117 degrees                                     IN – 117 degreesOUT – 48 degrees                                 OUT – 20 degrees   All research, design and development carried out at AIRTEC HQ in the UK by our team of fabricators and engineers. Extensive UK track days and multiple trips to the Nürburgring complete our comprehensive development and testing programme. We strive to put all of our products through a grueling test procedure so we can focus on ensuring they are nothing but the very best quality, delivering you the best performance on the road and track.   DimensionsOEM intercooler                                               AIRTEC Motorsport intercoolerWidth: 619mm                                                  Width: 620mmHeight: 409mm                                                 Height: 420mmDepth: 36mm                                                    Depth: 63mmCapacity: 9.1 litres                                            Capacity: 16.4 litresFront area: 25,320cm²                                    Front area: 26,000cm²   Fitment 2021 onwards – VW Mk8 Golf R 2.0T2021 onwards – VW Mk8 GTI 2.0T2021 onwards – Audi 8Y A32021 onwards – Audi 8Y S3   Features Specifically designed for the EA888 Gen 4 platform Tried and tested core design that’s proven to work 80% increase in overall capacity in comparison to original Increase in frontal area over standard Huge increase in cooling ability High-flow, one-piece cast end tanks Pro Hoses silicone boost pipes included Powder coated black finish Includes fittings and fixtures Detailed fitting guide included AIRTEC Part No: ATINTVAG45

Read more less

To get the most out of your turbo, an upgrade to the intercooler is a must.  Made from the best quality Tube and Fin intercooler cores, Leyo Motorsport’s performance Intercooler provides better flow of air while lowering boost air temperature.  This increases the oxygen density that enters the engine which amplifies power and better fuel economy.  Leyo intercooler has the following core size 630mm x 413mm x 50mm providing over 60% more volume than OEM intercooler. Increased Cooling Capacity Increased Flow Increased Air Density Increase horsepower Core size 630x413x50

Read more less