Performance - MK2 Focus All Models

The best intercooler for the Focus ST just got better! Now fitted with the scoop from the AIRTEC RS intercooler package, which forces air directly into the core for even more cooling power!   Bolt on power, no extra parts required to fit and connects to standard size boost hoses(comes with full brackets and fittings included)   Q. Why doesn't it have oil cooler mounts on top of the Intercooler? A. Because we research our products and when the Intercooler is fitted and you install an Oil cooler on top of any intercooler you get absolutely no Airflow to the oil cooler 'due to the upper bumper is Blocking Airflow', so it's pointless. Our AS Performance oil cooler kit is available soon and you will see how well it works with maximum Airflow.   Available In Pro-Series satin Black or Natural Silver AlloyTorque of the Devil Rolling Road test results! 31/01/2009Gen 3 Test results :296.4bhp Brake horse power figure was impressive! :390 lbs/ft Massive Torque curve:148 degrees Inlet Temperature :30 degrees Outlet Temperature Standard Ford Intercooler Test results :275 bhp Brake horse power figure was down on power compared to Gen 3 :350 lbs/ft Torque was also down compared to Gen 3 :144 degrees Inlet Temperature :66 degrees Outlet Temperature AIRTEC's latest intercooler for the ST Turbo, they have now changed the total design with new high flow 60mm core and smooth flow end tanks, which in turn has increased power, torque & also lowered ATC Temps, this could possibly be the best ST intercooler available. Yes, it’s really that good!Bolts onto the bottom of the radiator cradle so there is not major weight put onto the standard radiator mounts like other alloy intercoolers on the market

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

Generation 3 AIRTEC Stage 1 60mm Focus ST Intercooler Upgrade   AIRTEC's latest intercooler for the ST225, the total design has now changed with a new high-flow, 60mm core and smooth flowing end tanks, which has lowered ACTs and in-turn increased power and torque. This could possibly be the best ST intercooler available. Yes, it’s really that good!   Bolts onto the bottom of the radiator cradle so there isn't major weight added onto the standard radiator mounts like other alloy intercoolers on the market.   Comes with full brackets and all fixtures and fittings included.   Available in natural silver or Pro-Series satin black finish for that ultimate stealth look.Still as easy to fit and improved high-flow design. Torque of the Devil Rolling Road Test Results AIRTEC Gen 3 Intercooler:   148 degrees - Inlet Temperature 30 degrees - Outlet Temperature   296.4bhp390lb ft Standard Ford Intercooler:    144 degrees - Inlet Temperature 66 degrees - Outlet Temperature 275bhp 350lb ft of torque    Brake horse power and torque figures both down on power compared to Gen 3     An AIRTEC Best seller!

Read more less

We have taken our huge Focus RS Intercooler and modified it to fit with the ST Bumper & then taken our massive 2.5" cold side Pro hose (intercooler to inlet manifold) and a Pro hose boost pipe from Intercooler to ST standard metal pipe, making this kit the best value for money option for 300+ bhp Focus ST's   Designed & Proven to extract maximum gains from your 300+ bhp ST, this kit would compliment the DreamScience Turbo X upgrade, Jamsport or a similar Big Turbo conversion.   Our RS into ST Performance & Cooling kit has been Rolling road tested (tests caried out @ AMD Essex)   2.5" Hard pipe upgrade removes fords 2.0" restrictive boost pipe (cold side). We saw gains of 10 bhp+ & 9 lb/ft torque increase's over the standard ford Gains will vary depending on spec of your ST   Intercooler spec. Air-Ram Scoop, forces Air directly into core of intercooler Huge high flow 60mm core, lower ACT Temps,  Smooth flow end tanks, no welds, means no leaks Airtec logo brackets Increased BHP & torque Figure Pro-Series Black Strongest Intercooler available, backed up by our 3 year warranty.  Cold & Hot side Pro hose joiners, available in choice of colours Fitting takes 1 - 2 hours depending on mechanical skill & tools available   Important Note. The Pre-facelift ST has a different radiator compared to the facelift & RS, this makes the left hand pipe (Inlet side) very tight against the radiator cradle & boost hose, we recommend removing the radiator cradle bolt, levering the cradle to the right and re-drilling a new hole & then replace bolt. Its very simple and Easy to do, but is necessary to give you extra clearance for the bigger 2.5" pipe, if you are still not happy with fit we would recommend fitting a RS radiator, not required to get the power you want, just makes cold side hose fit nicer.   Need even more Power! take a look at our stage 4 Airtec intercooler cooling package, this kit includes full 2.5" boost pipe kit.    Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)   Intercooler Volume Capacity (The amount of charged air that the intercooler can hold) Standard: 4.4AIRTEC: 7.3-litres

Read more less

Designed & Proven to extract maximum gains from your 300+ bhp ST, this kit would compliment the DreamScience Turbo X upgrade or a similar Big Turbo conversion.   Our RS into ST Performance & Cooling kit has been Rolling road tested (tests caried out @ AMD Essex)   2.5" Hard pipe upgrade removes fords 2.0" restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increase's over the standard ford pipes, these gains were achieved by simply bolting on the big AS 2.5" Boost pipe kit!  (these are RS figures, ST gains to be publised soon) Gains will vary depending on spec of your ST   Intercooler spec. Air-Ram Scoop, forces Air directly into core of intercooler Huge high flow 60mm core, lower ACT Temps,  Smooth flow end tanks, no welds, means no leaks Airtec logo brackets Increased BHP & torque Figure Pro-Series Black Strongest Intercooler available, backed up by our 3 year warranty.  All Pipe's have swayed ends to stop the pipes blowing off Fitting takes 1 - 2 hours depending on mechanical skill & tools available Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)   Important Note. The Pre-facelift ST has a different radiator compared to the facelift & RS, this makes the left hand pipe (Inlet side) very tight against the radiator cradle & boost hose, we recommend removing the radiator cradle bolt, levering the cradle to the right and re-drilling a new hole & then replace bolt. Its very simple and Easy to do, but is necessary to give you extra clearance for the bigger 2.5" pipe, if you are still not happy with fit we would recommend fitting a RS radiator, not required to get the power you want, just makes cold side hose fit nicer.

Read more less

Airtec stage 3 is the only off the shelf intercooler that uses a 100mm deep core! we use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties The Airtec stage 2 had already proved itself in the Focus RS tuning scene as the must have mod for 400+ cars, we wanted to take the stage 3 to a whole new level and it took well over 10 month's to get perfect. Every Stage 3 Intercooler comes with a 70mm cold side hose, if you have a big boost pipe kit fitted, your Hot side pipework will still fit. Features of Stage 3. Smooth flow curved end tanks, for that ultimate flow Cold side Intercooler end tank made with 70mm outlet to match the throttle body outlet 70mm Alloy'silicon cold side hose, if you have a big boost pipe kit fitted, your Hot side pipework will still fit Huge high flow 100mm core AKA 'The GobStopper' Air-Ram Scoop, forces Air directly into core of intercooler Fitting takes 2-3 hours max, NO Bumper removal required Increased BHP & torque Figure Available in Pro-Series Black or Natural Silver Strongest Intercooler available, backed up by our 3 year warranty. Made by Europes No.1 Intercooler supplier for the Mk2 RS Test results  AIRTEC Stage2 Intercooler - Max power 594.2 bhp & 546.3 lbft torque  Run 1 Air temp into Intercooler 164 degrees & Air temp out of Intercooler 25 degrees Run 2 Air temp into Intercooler 163 degrees & Air temp out of Intercooler 27 degrees Run 3 Air temp into Intercooler 168 degrees & Air temp out of Intercooler 28 degrees AIRTEC Stage3 Intercooler - Max power 631.5 bhp & 600.5 lbft torque  Run 1 Air temp into Intercooler 166 degrees & Air temp out of Intercooler 21 degrees Run 2 Air temp into Intercooler 167 degrees & Air temp out of Intercooler 22 degrees Run 3 Air temp into Intercooler 171 degrees & Air temp out of Intercooler 22 degrees Gains of 37.3+ bhp peak & 54.2 lbft torque increase. This was simply by swapping from stage2 to stage3, Please note if you were fitting stage 3 on a 400+bhp car you would not see gains like above, this intercooler was designed for Genuine 500+ bhp cars, it will improve a 400+ bhp car but not to the level of the car on test. AIRTEC part number: ATINTFO23

Read more less

As part of our expanding Focus RS product range, AIRTEC Motorsport is proud to launch our Stage 3 intercooler upgrade suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have taken our hugely popular Stage 1 Focus RS intercooler and modified it to fit within the ST bumper and added our 2.5″ Pro Hoses(intercooler to inlet manifold connector and Pro Hoses intercooler to ST boost hose. This offers a massive increase in overall capacity in comparison to the original intercooler, as well as a significant increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow end tanks and air diverter scoop to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Matched with our 2.5″ hard boost pipe upgrade that replaces the OEM 2″ pipework. Increasing the dimeter reduces restriction and improves flow, which in turn sees an instant increase in power, as seen during back-to-back dyno testing which saw a huge 11.8bhp and 9lb ft of torque gain simply by fitting the new pipework. Features: Huge high flow 60mm core Air Ram Scoop forces air directly into core of intercooler Smooth-flow end tanks AIRTEC logo brackets 2.5″ pipe work improves flow Increased BHP & torque Pro-Series Black or Natural Silver Strongest intercooler available, backed up by our 3-year warranty Please note: Pipework only available in Pro-Series Black PLEASE ADD NOTE AT END NEAR CHECKOUT OF WHICH LOGO COLOUR YOU WOULD LIKE ON INTERCOOLER:- NO LOGO-WHITE-YELLOW-BLUE-RED-PURPLE-PINK-ORANGE-GREEN -GREY-BLACK    Important Note: The Pre-facelift ST has a different radiator compared to the facelift & RS, this makes the left hand cold side silicone hose very tight against the radiator cradle. We recommend removing the radiator cradle bolt, levering the cradle to the right and re-drilling a new hole & then replacing the bolt. It’s very simple and easy to do, but is necessary to give you extra clearance for the bigger 2.5″ cold side hose. If you are still not happy with the fit, we would recommend fitting an RS radiator. Registered Design Right number: 6022644 AIRTEC Part No: ATINTFO34

Read more less

As part of our expanding Focus RS product range, AIRTEC Motorsport is proud to launch our Stage 3 intercooler upgrade suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have taken our hugely popular Stage 1 Focus RS intercooler and modified it to fit within the ST bumper and added our 2.5″ Pro Hoses(intercooler to inlet manifold connector and Pro Hoses intercooler to ST boost hose. This offers a massive increase in overall capacity in comparison to the original intercooler, as well as a significant increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow end tanks and air diverter scoop to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Matched with our 2.5″ hard boost pipe upgrade that replaces the OEM 2″ pipework. Increasing the dimeter reduces restriction and improves flow, which in turn sees an instant increase in power, as seen during back-to-back dyno testing which saw a huge 11.8bhp and 9lb ft of torque gain simply by fitting the new pipework. Features: Huge high flow 60mm core Air Ram Scoop forces air directly into core of intercooler Smooth-flow end tanks AIRTEC logo brackets 2.5″ pipe work improves flow Increased BHP & torque Pro-Series Black or Natural Silver Strongest intercooler available, backed up by our 3-year warranty Please note: Pipework only available in Pro-Series Black PLEASE ADD NOTE AT END NEAR CHECKOUT OF WHICH LOGO COLOUR YOU WOULD LIKE ON INTERCOOLER:- NO LOGO-WHITE-YELLOW-BLUE-RED-PURPLE-PINK-ORANGE-GREEN -GREY-BLACK    Important Note: The Pre-facelift ST has a different radiator compared to the facelift & RS, this makes the left hand cold side silicone hose very tight against the radiator cradle. We recommend removing the radiator cradle bolt, levering the cradle to the right and re-drilling a new hole & then replacing the bolt. It’s very simple and easy to do, but is necessary to give you extra clearance for the bigger 2.5″ cold side hose. If you are still not happy with the fit, we would recommend fitting an RS radiator. Registered Design Right number: 6022644 AIRTEC Part No: ATINTFO34

Read more less

MVT technology designed by Direnza offers greater intercooler efficiency in comparison to other aftermarket alternatives. This is achieved through the use of carefully placed vanes in the end tank which evenly distribute air across the entire core. Ensuring the full surface area of the intercooler core is optimised to cool your charged air, resulting in more power.   Black coating improves heat dissipation properties Carefully crafted using state of the art 3D CAD and CFD modelling Direct replacement for the original setup Provided an instant boost of +30.3hp and +35Ft/lb on our test car Fully TIG welded for maximum strength and durability Fitment Ford Focus MK2 2.5l ST 225bhp 2005-2012 models Part Number DZIC090 Intercooler / Radiator - Core Height (mm) 295 Intercooler / Radiator - Core Length (mm) 695 Intercooler / Radiator - Core Width (mm) 76 Intercooler / Radiator - Hose Bore (mm) 1 x 90° 65mm | 1 x 60mm | 1 x 60-67mm + 32mm Intercooler / Radiator - Inlet Size (mm) 54 Intercooler / Radiator - Outlet Size (mm) 54 Intercooler / Radiator - Overall Height (mm) 295

Read more less

Hose Colour Options: (Please leave a note on your order with the pipe colour you would like) Gloss Black Performance Blue Race Red Frost White (Product Made To Order - Please Allow 2-4 Weeks) Bright Yellow (Product Made To Order - Please Allow 2-4 Weeks)  Orange (Product Made To Order - Please Allow 2-4 Weeks) Kawasaki Green (Product Made To Order - Please Allow 2-4 Weeks) Grey (Product Made To Order - Please Allow 2-4 Weeks) Purple (Product Made To Order - Please Allow 2-4 Weeks) Ultimate Green (Product Made To Order - Please Allow 2-4 Weeks)           As part of our expanding Focus RS product range, AIRTEC Motorsport is proud to launch our Stage 2 intercooler upgrade suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a 65mm core that’s twice as high and almost 100mm longer than the standard item. This offers a massive increase in overall capacity in comparison to the original intercooler, as well as a 127% increase in frontal area over standard, which allows it to make the most of the air flow provided. To ensure that, the air ram scoop forces cold air through the core for more efficient air flow. Together with our high-flow end tanks and air diverter scoop to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. TESTEDTest carried out at Jamsport to measure intake temperatures after AIRTEC Stage 1 intercoolerAir temp into intercooler. 141 degreesAir temp out of intercooler. 34degrees AIRTEC Stage2 intercoolerAir temp into intercooler. 149 degreesAir temp out of intercooler. 26 degrees We also saw power gains of 20 bhp mid range & 30 lb ft torque increase. This was simply by swapping from Stage1 to Stage2.   Features: Huge high flow 65mm core 127% increase in frontal area for improved air flow Air-Ram Scoop forces air directly into core of intercooler Smooth flow end tanks AIRTEC logo brackets Increased BHP & torque Figure Pro-Series Black powder coated finish Strongest intercooler available, backed up by our 3 year warranty Registered Design Right number: 6022645

Read more less

As part of our expanding Focus RS product range, AIRTEC Motorsport is proud to launch our Stage 2 intercooler upgrade suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a 65mm core that’s twice as high and almost 100mm longer than the standard item. This offers a massive increase in overall capacity in comparison to the original intercooler, as well as a 127% increase in frontal area over standard, which allows it to make the most of the air flow provided. To ensure that, the air ram scoop forces cold air through the core for more efficient air flow. Together with our high-flow end tanks and air diverter scoop to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. TESTEDTest carried out at Jamsport to measure intake temperatures after AIRTEC Stage 1 intercoolerAir temp into intercooler. 141 degreesAir temp out of intercooler. 34degrees AIRTEC Stage2 intercoolerAir temp into intercooler. 149 degreesAir temp out of intercooler. 26 degrees We also saw power gains of 20 bhp mid range & 30 lb ft torque increase. This was simply by swapping from Stage1 to Stage2.   Features: Huge high flow 65mm core 127% increase in frontal area for improved air flow Air-Ram Scoop forces air directly into core of intercooler Smooth flow end tanks AIRTEC logo brackets Increased BHP & torque Figure Pro-Series Black powder coated finish Strongest intercooler available, backed up by our 3 year warranty Registered Design Right number: 6022645

Read more less

Hose Colour Options: (Please leave a note on your order with the pipe colour you would like) Gloss Black Performance Blue Race Red Frost White (Product Made To Order - Please Allow 2-4 Weeks) Bright Yellow (Product Made To Order - Please Allow 2-4 Weeks)  Orange (Product Made To Order - Please Allow 2-4 Weeks) Kawasaki Green (Product Made To Order - Please Allow 2-4 Weeks) Grey (Product Made To Order - Please Allow 2-4 Weeks) Purple (Product Made To Order - Please Allow 2-4 Weeks) Ultimate Green (Product Made To Order - Please Allow 2-4 Weeks)           As part of our expanding Focus RS product range, AIRTEC Motorsport is proud to launch our Stage 1  intercooler upgrade suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a 60mm core that’s twice as high and almost 100mm longer than the standard item. This offers a massive increase in overall capacity in comparison to the original intercooler, as well as a 127% increase in frontal area over standard, which allows it to make the most of the air flow provided. To ensure that, the air ram scoop forces cold air through the core for more efficient air flow. Together with our high-flow end tanks and air diverter scoop to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Matched with our 2.5″ hard boost pipe upgrade that replaces the OEM 2″ pipework. Increasing the dimeter reduces restriction and improves flow, which in turn sees an instant increase in power, as seen during back-to-back dyno testing which saw a huge 11.8bhp and 9lb ft of torque gain simply by fitting the new pipework. Features:  Huge high flow 60mm core – suitable over 400bhp 127% increase in frontal area for improved air flow Air Ram Scoop forces air directly into core of intercooler Smooth-flow end tanks AIRTEC logo brackets 2.5″ pipe work improves flow Increased BHP & torque Pro-Series Black or Natural Silver Strongest intercooler available, backed up by our 3-year warranty Please note: Pipework only available in Pro-Series Black

Read more less