performance-MK7-1l

Help your 1.0 EcoBoost get a much Air into the engine as possible! Please note: fits FIESTA ONLY - Focus you will need a different design, please inform our support team or add a note to order advising this is for a FOCUS so we can send the revised bracket! Transform your 1.0 EcoBoost engine bay, larger diameter pipe-work combined with AIRTEC induction kit means louder waste-gate chatter, similar to Focus RS Mk2  Features Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Increased induction noise AIRTEC induction kit recommended Fits all Fiesta Mk7/7.5 1.0 Eco Boost 100 ps and 125ps, 140ps models 

Read more less

The brand new Big Aero wing from Airtec Motorsport is here!   Designed with the help of CEUK based on our MK7 RT330 Track car we are proud to be the first stockist of this amazing item AIRTEC Motorsport Rear Wing for Mk7 Fiesta The kit attaches to the car using our bespoke AIRTEC Motorsport designed brackets, that is bolted to the boot lid. Please note, this requires drilling to your boot lid and should be done by a competent professional. Key features: • Designed and developed in the UK • Tested on track and road with our own Time Attack car • Bespoke laser-cut and powder coated alloy brackets • Unique alloy end plates available in three powder coated colours • High-quality fibreglass centre blade section finished in satin black • Comprehensive fitting kit with all fixtures, fittings, instructions and drilling template Available in a choice of coloured end plates: Gloss Black Race Red Frozen White AIRTEC part no: ATMSFO10 Please note: We endeavour to deliver an extremely high quality product but due to the handmade manufacturing process there is the possibility of minor imperfection(s) on the centre wing blade

Read more less

Suitable for all 3dr MK7 Fiesta ST’s with standard front bumpers. Rear will fit any facelift Fiesta MK7 however front may need a slight adaption by a body shop to fit any “NONE ST’s” These arches are produced to a very high standard and require painting prior to install We HIGHLY recommend these are fitted by a bodyshop. They can be fitted without cutting existing arches, but depending how the car sits depends on the work needed. (Without cutting existing arches, you may not be able to sit as low as you want.)   Registered Design Right number 6012610

Read more less

AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel. The AIRTEC turbo hard pipe will improve airflow and turbo noise (dump valve pshhh) Features: High quality hard pipe Easy to fit Compatible with all Fiesta 1.0 EcoBoost models, Mk7 & Mk8 – 100PS, 125PS, 135PS, 140PS (Limited, Red & Black, 164 models).

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

AIRTEC Motosport have designed and released a bolt in roll cage for the Ford Fiesta ST180 and ST200 AND MK7 FL - NO drilling or cutting required. Designed primarily for use as a show cage/harness bar, these are a quick and easy fit retaining the use of original M10 seat belt mounting points. Constructed from FIA spec E355+N cold drawn seamless steel, aimed at strengthening and tightening the chassis in a simple and effective manner. No need for any additional mounting brackets to be welded in.

Read more less

Allows exhaust gases to flow much faster. More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car) This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. AIRTEC part no: ATEXHFO8

Read more less

AIRTEC Motorsport boost gauge kit for Fiesta 1.0 Ecoboost. The AIRTEC Motorsport Fiesta MK7 boost gauge kit, supplied with Turbosmart Boost Gauge in PSI or BAR. A simple modification with an OEM look. Comes complete with fitting guide for a quick & simple DIY install. Kit includes: Turbosmart backlit boost gauge (Bar or PSI) Gauge securing ring Vacuum hose Bracket and bolts CNC vacuum take off (Fits onto inlet manifold)

Read more less

AIRTEC Motorsport lightweight alloy header tank for Fiesta MK7 ST180 – Complete with sight glass! No drilling required, uses original fixing points and is a direct replacement of the original Ford plastic header tank. Registered Design Right number: 6064605 AIRTEC part no: ATMSFO89

Read more less

This is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150   The Yellow bush insert is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement.   The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massivley reduces engine movement for faster gear changes   New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use.   Features 2 x Polyurethane bush inserts CNC from solid billet alloy, bead blasted and anodised in satin Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required   This is why we choose Power Flex The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs.Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

AIRTEC Motorsport Weighted Gear Knob. In a black finish, with your choice of colour ring, finished with the AIRTEC Motorsport logo. Designed to enhance your driving experience and improve the looks of your interior. TECHNICAL DATA AIRTEC Motorsport Weighted Gear Knob. In a black finish, with your choice of colour ring, finished with the AIRTEC Motorsport logo. Designed to enhance your driving experience and improve the looks of your interior. The aluminium gear knob is finished in AIRTEC’s Pro-Series Black hard anodised finish with etched logo, offers a smart and slick look. Designed as a direct screw on replacement of the factory knob, whilst still retaining the reverse gear shift interlock feature. The black top is separated by a coloured ring, available in Red, Blue, Green, Yellow or white. Features: High quality hard anodised finish in Pro-Series Black Laser etched AIRTEC motorsport logo Choice of red, blue, green, yellow or white ring Direct replacement of the OEM part Will fit the following: Fiesta MK7 (ST) Fiesta MK8 (ST) Focus MK3 ST & RS MMT6 & IB5+ AIRTEC Part No: ATMSGK01

Read more less

AIRTEC Front mount Intercooler Features  1 x single pass 50mm core Intercooler with flowed end tanks, this means less welding and a stronger Intercooler Comes with full fitting instructions & pipe work  No cutting bumper with our intercooler kit  Un-Beatable value for money Available in Satin Black or Polished Alloy Airtec 3 year unlimited mileage warranty Fitting will take 1-2 hours depending on mechanical skill Finished In Pro-Series Satin Black or Mirror finish Polished Alloy Proven vertical 50mm core, runs top to bottom of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better. Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum Airflow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more Airflow to the intercooler, we suggest to do this whilst fitting.  Airtec intercooler will fit 100PS / 125PS / 135PS and 140PS (Red and Black) models. AIRTEC part number: ATINTFO35

Read more less