Help your 1.0 EcoBoost get a much Air into the engine as possible! Please note: fits FIESTA ONLY - Focus you will need a different design, please inform our support team or add a note to order advising this is for a FOCUS so we can send the revised bracket! Transform your 1.0 EcoBoost engine bay, larger diameter pipe-work combined with AIRTEC induction kit means louder waste-gate chatter, similar to Focus RS Mk2  Features Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Increased induction noise AIRTEC induction kit recommended Fits all Fiesta Mk7/7.5 1.0 Eco Boost 100 ps and 125ps, 140ps models 

Read more less

AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel. The AIRTEC turbo hard pipe will improve airflow and turbo noise (dump valve pshhh) Features: High quality hard pipe Easy to fit Compatible with all Fiesta 1.0 EcoBoost models, Mk7 & Mk8 – 100PS, 125PS, 135PS, 140PS (Limited, Red & Black, 164 models).

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

AIRTEC Front Mount Intercooler Features  1 x twin pass huge 60mm core intercooler with flowed cast end tanks, this means less welding and a stronger intercooler Comes with full fitting guide & pipe work  No cutting bumper with our intercooler kit  Unbeatable value for money Available in Satin Black or Natural Silver AIRTEC 3 year unlimited mileage warranty Fitting will take 1-2 hours depending on mechanical skill   Finished In Pro-Series Satin Black or Natural Silver Proven horizontal 60mm core, runs left to right of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better. Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum air flow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more air flow to the intercooler, we suggest to do this whilst fitting. Uses original crash bar holes, no drilling or modification required! Please note: Pipework only available in silver Approximate Dimensions: Thickness – 60mm Width – 525mm Height – 378mm Currently sent with Mk7 1.0 Fitting instructions as a fitting guide. Currently does not fit cars with adaptive cruise control.  

Read more less

AIRTEC Motorsport Header Tank for Fiesta MK8 ST-200 AIRTEC Motorsport lightweight alloy header tank for Fiesta MK8 ST-200 & mk2 puma st complete with sight glass. No cutting or drilling required, uses original fixing points and is a direct replacement of the original Ford header tank. Registered design right number: AIRTEC part no:

Read more less

The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.0 Fiesta Mk8 ST-Line.Expect to see gains of 5-10bhp compared to the original Airbox.Please note: This kit is designed to fit the pre 2020 model that has the turbo at the front. for the 2020-onwards 1.0 EcoBoost model with the turbo at the rear please see:  INDUCTION KIT FOR FIESTA MK8 1.0 & ST-LINE (REAR TURBO 2020 ONWARDS) Enhanced induction sound, great looks and loud recirculation dump valve noise on let off.Features: Removes ugly original plastic & restrictive airboxAdds power and torquemore responsive and exciting driving experienceEnhanced induction sound and turbo recirculation noise (dump valve ‘psssh’)free flowing Airfilter & optional k&n dry charger filter coverCNC maf sensor bossPowder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filterCold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photoAdds style to your engine bayEasy fitting, takes less than 15-20 minutes to install It’s easy to fit, looks great, sounds even better, doesn’t cost the earth and can be put back to standard within 10 minutes (warranty)A simple modification that transforms the look of your engine bay. Please note: Bolt needs cutting if fitting optional silicone hose. Registered Design Right number 6023921 AIRTEC part no: ATIKFO17

Read more less

Please note: yellow bushes have now been discontinued until further notice on this mount! This mount is for the PRE FACELIFT MK8 Fiesta Only - 2017-2022 AIRTEC Motorsport billet torque mount for the Mk8 Fiesta ST-Line & ST (200PS). The perfect upgrade for everyday use and the odd track day with standard yellow bushes, close to standard driving experience without the excessive engine movement. The purple bush insert is aimed at track and race and slightly firmer than the yellow bush, not recommended for everyday use. Very close to 'solid' and will increase cabin noise! Purple bushes massively reduces engine movement for faster gear changes. The ultimate 'Black Series' bush insert purely for track and race use! The black series bush offers the most precise and accurate driving experience. Almost 100% solid, this is only aimed at the most hard-core track day or serious, hard, fast road use! Features: 6x Polyurethane bushes CNC solid billet alloy and anodised in satin black Hugely reduces engine movement and wheel hop on harsh acceleration A must have upgrade for tunes and modified cars Replaces the standard Ford torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required Designed and made at AIRTEC HQ Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

AIRTEC Motorsport Weighted Gear Knob. In a black finish, with your choice of colour ring, finished with the AIRTEC Motorsport logo. Designed to enhance your driving experience and improve the looks of your interior. TECHNICAL DATA AIRTEC Motorsport Weighted Gear Knob. In a black finish, with your choice of colour ring, finished with the AIRTEC Motorsport logo. Designed to enhance your driving experience and improve the looks of your interior. The aluminium gear knob is finished in AIRTEC’s Pro-Series Black hard anodised finish with etched logo, offers a smart and slick look. Designed as a direct screw on replacement of the factory knob, whilst still retaining the reverse gear shift interlock feature. The black top is separated by a coloured ring, available in Red, Blue, Green, Yellow or white. Features: High quality hard anodised finish in Pro-Series Black Laser etched AIRTEC motorsport logo Choice of red, blue, green, yellow or white ring Direct replacement of the OEM part Will fit the following: Fiesta MK7 (ST) Fiesta MK8 (ST) Focus MK3 ST & RS MMT6 & IB5+ AIRTEC Part No: ATMSGK01

Read more less