THIS LISTING IS FOR ONE SINGLE HOLDER WITH SILVER BACKGROUND AS SEEN- LAST IN STOCK AS THIS STYLE HAS BEEN DISCONTINUED Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - THIS LISTING IS FOR ONE SINGLE HOLDER - LAST IN STOCK! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates. Best quality guaranteed!

Read more less

Japan Racing JR11 Custom Wheels   Taken from our MK8.5 fiesta st these will fit any 4x108 fitment such as the fiesta MK8 and 8.5 etc. Specs: 18 inch diamater 7.5 inch width ET35 offset 4x108 stud pattern powder coated white 4x Eagle F1 Asymetric 5 Tyres - very good tread depth WHEELS & TYRES HAVE ONLY COVERED 9,000 MILES All wheels run True, Un Buckled & un cracked. 1 SMALL Paint chip on the surface which has been toucched up - picture in images. To get a set of wheels and tyres like this new you would be looking at around £1700+ As they do not come in white from JR We are not prepared to ship this item as our carrier insurance does not cover used items - In respect these MUST be collected from CEUK HQ in Bradford, West Yorkshire These are none returnable as they are used!

Read more less

THIS SALE IS FOR THE CAP TAKEN OFF OF OUR MK8.5 FIESTA ST (GREEN) IT IS IN A USED BUT VERY GOOD CONDITION - NEEDS A WIPE AND 3M TAPE TO BE RE APPLIED TO INSTALL (OR TIGER SEAL IF YOU PREFER) ------ SPOILER CAP V.2 FORD FIESTA MK8 ST / ST-LINE FITS ONLY: FORD FIESTA ST-LINE MK8 / MK8.5 (2017-Onward)FORD FIESTA ST MK8 / MK8.5 (2018-Onward)Please Note:  ** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. ** COMPLETE SET CONTAINS:-> Spoiler Extension with 3M Tape-> Degreasing Cloth Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

Tidy up your engine bay with a Proform Engine Bay Slam Panel cover.  These parts fit neatly over the existing factory slam panel.  Taking literally minutes to fit, this panel is the finishing touch to any detailed engine bay. There is no need to remove the bumper to fit this part.  Fixings and fitting instructions are included. Available in a range of finishes including our new Deluxe Carbon Fibre Effect Plastic.  These are also available in our top of the range painted and hydrodipped finishes as a custom order - please contact us for details. 'Speed Shapes' shown are for colour demonstration purposes only.  

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

  Tidy up your engine bay with a Proform ECU Cover. Supplied in a choice of finishes including smooth plastic (which comes ready to be prepped and painted/hydrodipped), OEM textured plastic for the factory look, a range of coloured plastics and our gloss carbon fibre effect plastics. These covers have been manufactured from coloured material rather than prepped, painted and lacquered (but can be painted to order - contact us for details). Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting parts may contain manufacturing marks that would be easily removed during the preparation process. NB: Please note raw parts may contain manufacturing marks that are easily removed during the preparation process.

Read more less

 Tidy up your engine bay with a Proform Engine Bay Slam Panel cover.  These parts fit neatly over the existing factory slam panel.  Taking literally minutes to fit, this panel is the finishing touch to any detailed engine bay. There is no need to remove the bumper to fit this part.  Fixings and fitting instructions are included. Available in a range of finishes including our new Deluxe Carbon Fibre Effect Plastic. 'Speed Shapes' shown are for colour demonstration purposes only. Please note smooth for painting parts may contain minor manufacturing marks which will be easily removed during the preparation process.

Read more less