Revo Software - Volkswagen

The Revo Coolant Relocation Hose offers a high-quality single piece replacement for the OEM part which redirects the hose under the front air scoop to give a more aesthetically pleasing look. COOLANT RELOCATION HOSE The Revo Coolant Relocation hose has been designed and manufactured to directly replace the stock hose found in vehicles with the 1.8T and 2.0T TSI EA888 Gen3 engines. The Revo Coolant Relocation Hose offers a high-quality single piece replacement for the OEM part which redirects the hose under the front air scoop to give a more aesthetically pleasing look.  KEY FEATURES Direct Routing Silicone Hose Improve Aesthetics Coolant caps for easy installation     TECHNICAL DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the MQB Coolant relocation hose instructions   VEHICLE APPLICATIONS   Manufacturer Model Engine Year Audi A3 / S3 (8V) 1.8 / 2.0 TFSI 12 - Audi TT / TTS (MK3) 2.0 TFSI 14 - Seat Leon (MK3) 1.8 / 2.0 TSI 15 - Skoda Octavia (Mk3) 1.8 / 2.0 TSI 13 - Skoda Superb 2.0 TSI 15 - VW Golf (Mk7) 1.8 / 2.0 TSI 12 -

Read more less

EVERYTHING YOU NEEDFOR THE POWER YOU CRAVE Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all. Engineered to perform, only Revo offers a complete tuning solution specifically designed for your vehicle. AIR INTAKE SYSTEM PERFORMANCESOFTWARE INTERCOOLER PIPE UPGRADE KIT INTERCOOLER     CARBON SERIESAIR INTAKE SYSTEM Beautifully crafted from the highest quality 3k carbon, the Revo Carbon Series is much more than a visual enhancement. Designed to directly replace restrictive OEM components, the Carbon Series has performance woven into the core of every product. IncreasedDiameter DirectInternals ThermalBarrier Learn more about this product OPEN CONEAIR INTAKE SYSTEM Revo Open Cone Air Intake Systems completely replace the OEM air intake for those who like to announce their vehicle is far from standard. Along with an aggressive intake sound, more air means access to more power throughout the rev-range. IncreasedFlow DirectReplacement IncreasedDiameter Learn more about this product     PERFORMANCE ECU SOFTWARE Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev range while maintaining the extensive factory safety mechanisms. Revo Software offers a perfect balance of performance, economy, longevity, and safety so you can drive harder, for longer. OBDII PortInstalled Vehicle HealthCheck Authorised DealerSet-up Read More TCU SOFTWARE Revo Transmission Control Unit Software allows your automatic gearbox to work in harmony with Revo ECU Software. As well as enhanced driveability and quick shifts, Revo TCU Software is packed full of features. OptimisedShift Points DynamicLaunch Control GlobalDevelopment Programme Read More     INTERCOOLER PIPE UPGRADE KIT The Revo Intercooler Pipe Upgrade kit reduces charge system resistance and improves flow over the restrictive stock pipework. Featuring fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. DirectReplacement IncreasedDiameter DirectInternals Learn more about this product INTERCOOLER UPGRADE The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Unique design features lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software, ensuring you get consistent performance when you need it most. DirectReplacement UniqueFin Design MinimisedPressure Drop Learn more about this product     STOCK POWER300PS TORQUE380NM 0 - 60 MPH4.6S 100 - 200 KPH14.2S POWER400PS TORQUE550NM 0 - 60 MPH3.6S 100 - 200 KPH8.8S Find your nearest Revo Authorised Dealer Manufacturer Model Variant Engine Year Audi S3 8V 2.0 TFSI 2014 - 2019 Audi TTS 8S 2.0 TFSI 2014 > SEAT Leon Cupra 5F 2.0 TSI 2014 - 2019 Skoda Superb 3V 2.0 TSI 2014 - 2019 VW Arteon 3H 2.0 TSI 2017 > VW Golf R Mk7 2.0 TSI 2014 - 2019 VW Golf GTI Clubsort Mk7 2.0 TSI 2016 - 2018 VW Golf GTI Clubsort S Mk7 2.0 TSI 2016 - 2017 Images shown are for illustration purposes only All software and features are ECU/TCU ID dependant. Upgrade pricing is for existing Revo ECU or/and TCU customers.  Terms and Conditions apply.  Exhaust Overrun is an seperate file option that can be choosen at point of software installation. Performance data is taken from 2016 VW Golf R Mk7 with DSG. Aftermarket downpipe required. Pricing does not include the installation of parts, please contact your local Revo Authorised Dealer.

Read more less

Beautifully crafted from the highest quality 3K carbon, the Revo Carbon Series is much more than a visual enhancement. Designed to directly replace restrictive OEM components, the Carbon Series has performance woven in to the core of every product. REVO CARBON SERIES - AIR INTAKE SYSTEM The Revo Carbon Series Air Intake System for the 2.0 & 1.8TSI offers unparalleled performance benefits along with a striking visual addition to your engine bay. The full kit, which comes complete with a matching Carbon Series front scoop, lid, back-pipe and Pro-Panel filter completely replaces any restrictive elements of the OEM intake system, decreasing turbulence and allowing a larger volume of air to reach the turbo more quickly KEY FEATURES Increased Performance Improves Air Flow Efficiency Carbon Series Quality Replaces Restrictive Stock Turbo Elbow Engineered for both LHD and RHD Fitment 16% Larger Air Box Outlet     FULL KIT INCLUDES 90mm Turbo Inlet Hose Machined Inlet Carbon Air Box Lid ProPanel Air Filter Carbon Front Section Coolant Relocation Hose RESEARCH AND DEVELOPMENT All Revo products are designed in-house, allowing our team of engineers to rigorously test products during the design process. Only Revo offers a kit with a 16% larger lid outlet and matching hose, ensuring maximum performance at even Stage 3 and above specification.   GRAPHS To ensure this product would meet our exacting standards and performance, we carried out controlled testing on a Stage 4 Skoda Octavia VRS 2.0TSI running Shell vPower pump fuel on an in-house Dynapak hub dyno. With impressive results in comparison to the standard set up, peak results showed up to +41 WHP and +42 NM over stock with an average of +19whp and +25NM throughout the rev range.     VEHICLE APPLICATIONS   Manufacturer Model Engine Year Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V)/td> 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Seat Ibiza Cupra 1.8 TSI 15 - Volkswagen Golf (MK7) 2.0 TSI GTI 14 - Volkswagen Golf (MK7) 2.0 TSI R 14 - Volkswagen Golf (MK7) 1.8 TSI 12 - * Fitments for 1.8 TSI & 2.0 TSI Engines with IHI IS20 and IS38 Turbos INDIVIDUAL PRODUCTS Carbon SeriesCarbon Lid & Hose Kit Carbon SeriesCarbon Scoop Carbon Series Secondary Breather Revo Carbon Series air intake systems perform beautifully. Designed to function no matter the power, Carbon Series intakes look great because of their effective design.

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory air box and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High airflow with three layers of foam Lifetime warranty Lasts up to 60,000 miles before cleaning is required depending on driving conditions Works with original manufacturers air box   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing airflow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full air flow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to original purchaser with proof of purchase)     FITTING        Manufacturer Model Engine Year Audi A3 (8V)  1.8 / 2.0 TFSI  2012 > Audi A3 (8V)  1.6 / 2.0 TDI  2012 > Audi TT (Mk3)  1.8 / 2.0 TFSI  2014 > Audi TT (Mk3)  2.0 TDI  2014 > Seat Leon (Mk3)  1.8 / 2.0 TSI  2012 > Skoda Octavia (MK3)  1.8 / 2.0 TSI  2013 > Skoda Octavia (MK3)  1.6 / 2.0 TDI  2013 > Skoda Superb (Mk3)  1.8 / 2.0 TSI  2015 > Skoda Superb (Mk3)  1.6 / 2.0 TDI  2015 > VW Golf Vll (Mk7)  1.8 / 2.0 TSI / GTI / R  2012 > VW Golf Vll (Mk7)  1.6 / 2.0 TDI / GTD  2012 > VW Golf Vlll (Mk8)  GTI 2.0 TSI  2019 > VW Golf Vlll (Mk8)  2.0 TDI  2019 > VW Passat  1.8 / 2.0 TSI  2014 > VW Passat  1.6 / 2.0 TDI  2014 > VW Polo GTI  2.0 TSI  2018 > VW Tiguan  2.0 TSI  2016 > VW Tiguan  2.0 TDI  2016 > VW Touran  1.8 TSI  2015 > VW Touran  1.6 / 2.0 TDI  2015 >

Read more less

REVO TCU SOFTWARE Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. STAGE 2 | STOCK IS38 The DQ250 direct-shift is an electronically controlled dual-clutch gearbox that offers much faster gear changes. The dual clutch allows gears to change instantaneously without losing boost. Improved engine performance from Revo ECU Software means that the stock shift points do not give you the maximum potential that your car has to offer. Revo Transmission Control Unit (TCU) Software ensures your gearbox works in harmony with Revo ECU Software to give you access to even more power. Only The Driven know that quicker gear changes and extended rev-ranges mean more exhilarating power, and as with all Revo Software, you won’t have to compromise on day-to-day driveability. DQ250 DSG GEARBOX Revo TCU Software offers improved response and optimised shift points but maintains the characteristics of Drive and Sports mode. Manual mode now gives you more control by disabling the automatic kick down feature, unlike drive mode where if you plant your foot the gears automatically kick down, allowing you to select the gear you want and make the most of the increased torque from Revo ECU software. Automatic upshift is still active all in modes to offer the best performance and safety for your engine, whilst Dynamic Launch Control allows you to launch at various RPM points depending on your throttle position, improving your 0-60mph times. The result of over two years of extensive development through our Global Development Programme. This Software has been tested in countries from South Africa, Brazil and America to Australia, South Korea, Russia and Germany giving us invaluable data from a wide variety of driving styles and conditions. This ensures the unrivalled quality and performance you demand. SOFTWARE FEATURES DYNAMIC LAUNCH CONTROL Variable RPM launch control via throttle position GLOBAL DEVELOPMENT PROGRAM Extensively tested through our development program OBD INSTALL Revo Software can be installed quickly and safely via the OBD Port   DEVELOPMENT Revo started Developing ECU software in 2014 for the GEN3 EA888 engines, and 12 months later started working on the MQB DSG software to match. Our own in-house Audi S3, VW Golf R and Skoda vRS spent countless hours in the hands of the calibration engineers, 2 years later they had combined over 70,000miles of varied driving throughout the UK on road and track. During the early stages of testing it was established that the cars are capable of very quick launch times once tuned, however, it equally became apparent that the ECU torque strategy needed to be carefully calibrated to help each car achieve optimum performance while keeping factory OEM style drivability and mechanical sympathy for the DSG. 2016 saw the start of the Global Beta test program throughout the Revo Authorised dealer network in Russia, South Africa, Brazil, America, Malaysia, Australia, South Korea, Italy, Germany and Spain to name but a few. This ability to get people driving their own cars provided crucial feedback for Revo to begin to get the product to market, safe in the knowledge we have thoroughly tested all aspects of DSG tuning in collaboration with Revo ECU software.   TECHNICAL DATA Revo Transmission Stage 2 Software has been designed to work with Revo Stage 2 ECU Software. Calibrated for 2 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 2500 At 45-60% throttle launch RPM is 3000 At 70% throttle launch RPM is 3250 At 85-100% throttle launch RPM is 3500 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Increased clamping pressure Revo Transmission Stage 2 Software has been designed to work with Revo Stage 2 ECU Software. Calibrated for 4 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 3000 At 45-60% throttle launch RPM is 3500 At 70% throttle launch RPM is 3750 At 85-100% throttle launch RPM is 4000 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Increased clamping pressure

Read more less

Revo Torque MountMore power results in more movement during aggressive acceleration. The stock torque mount is designed to offer comfort over performance and does not manage engine movement effectively. Designed to significantly reduce the loss of torque and drastically improve traction and acceleration, the Revo Torque mount has little to no effect on vibration and harshness levels (NVH) felt in the cabin. Key Features Dramatically reduce drivetrain movement Improved acceleration and torque Simple and easy to install with tool included Doesn't require sub-frame removal for installation Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting Kit A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. This allows the OEM part to be removed and the Revo part to be installed without removing the sub-frame, reducing installation time and the need for axle re-alignment. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructions Download the Revo MQB Torque Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull Mount Kit available, including Engine, Transmission and Torque mount Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. REVO TCU SOFTWARE STAGE 1 | STOCK IS38 The DQ250 direct-shift is an electronically controlled dual-clutch gearbox that offers much faster gear changes. The dual clutch allows gears to change instantaneously without losing boost. Improved engine performance from Revo ECU Software means that the stock shift points do not give you the maximum potential that your car has to offer. Revo Transmission Control Unit (TCU) Software ensures your gearbox works in harmony with Revo ECU Software to give you access to even more power. Only The Driven know that quicker gear changes and extended rev-ranges mean more exhilarating power, and as with all Revo Software, you won’t have to compromise on day-to-day driveability. DQ250 DSG GEARBOX Revo TCU Software offers improved response and optimised shift points but maintains the characteristics of Drive and Sports mode. Manual mode now gives you more control by disabling the automatic kick down feature, unlike drive mode where if you plant your foot the gears automatically kick down, allowing you to select the gear you want and make the most of the increased torque from Revo ECU software. Automatic upshift is still active all in modes to offer the best performance and safety for your engine, whilst Dynamic Launch Control allows you to launch at various RPM points depending on your throttle position, improving your 0-60mph times. The result of over two years of extensive development through our Global Development Programme. This Software has been tested in countries from South Africa, Brazil and America to Australia, South Korea, Russia and Germany giving us invaluable data from a wide variety of driving styles and conditions. This ensures the unrivalled quality and performance you demand. SOFTWARE FEATURES DYNAMIC LAUNCH CONTROL Variable RPM launch control via throttle position GLOBAL DEVELOPMENT PROGRAM Extensively tested through our development program OBD INSTALL Revo Software can be installed quickly and safely via the OBD Port   DEVELOPMENT Revo started Developing ECU software in 2014 for the GEN3 EA888 engines, and 12 months later started working on the MQB DSG software to match. Our own in-house Audi S3, VW Golf R and Skoda vRS spent countless hours in the hands of the calibration engineers, 2 years later they had combined over 70,000miles of varied driving throughout the UK on road and track. During the early stages of testing it was established that the cars are capable of very quick launch times once tuned, however, it equally became apparent that the ECU torque strategy needed to be carefully calibrated to help each car achieve optimum performance while keeping factory OEM style drivability and mechanical sympathy for the DSG. 2016 saw the start of the Global Beta test program throughout the Revo Authorised dealer network in Russia, South Africa, Brazil, America, Malaysia, Australia, South Korea, Italy, Germany and Spain to name but a few. This ability to get people driving their own cars provided crucial feedback for Revo to begin to get the product to market, safe in the knowledge we have thoroughly tested all aspects of DSG tuning in collaboration with Revo ECU software.   TECHNICAL DATA Revo Transmission Stage 1 Software has been designed to work with Revo Stage 1 ECU Software. Calibrated for 2 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 2500 At 45-60% throttle launch RPM is 3000 At 70% throttle launch RPM is 3250 At 85-100% throttle launch RPM is 3500 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Revo Transmission Stage 1 Software has been designed to work with Revo Stage 1 ECU Software. Calibrated for 4 Wheel Drive vehciles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 3000 At 45-60% throttle launch RPM is 3500 At 70% throttle launch RPM is 3750 At 85-100% throttle launch RPM is 4000 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds

Read more less

STAGE 2 VOLKSWAGEN, GOLF VII R, 2.0 TSI - Pre Facelift 300ps Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. Stock 310ps  295lbft  REVO Stage 2 Software from 374ps to 401ps from 365lbft to 410lbft   REQUIRED HARDWARE Revo Performance Pack (or) Front Mount Intercooler High Flow Intake Kit Downpipe (Sports or Decat) RECOMMENDED HARDWARE Intercooler Pipe Upgrae Uprated suspension Uprated brakes Uprated Engine Mounts Revo offer some of the most substantial performance increases on the market. How this power is delivered however is far more important to us, which is why peak figures form part of a much bigger picture and are never the sole focus during the development process. it’s all about the drive, and only Revo offers a perfected balance of power, economy and an exciting drive. The Revo tuning philosophy ensures that impressive performance benefits are balanced with useable, reliable power delivery that enhances the way your vehicle drives. Development on the road and race track, as well as testing in controlled dyno conditions, gives you a clearer picture of the performance you can expect from Revo ECU Software. Testing in this way plays an important role in ensuring the highest quality products and delivering the driving experience you demand. Only Revo performance ECU Software maintains factory safety levels and additional driving features, so you can enjoy each mode’s unique characteristics as usual. You can also choose between two pre-set fuel quality modes depending on which fuel you use. If you would like the ability to do this yourself then the Revo SPS Software Switch is also available separately, which can be used to quickly switch fuel modes and access an additional Anti-Theft mode without the need to visit a Revo Authorised Dealer. AVAILABLE AS PART OF A PERFORMANCE PACK   To access the maximum potential of our software, choosing the correct hardware is extremely important. We offer an extensive range of products designed to work in harmony with our software to give you an experience you won't forget. With the Revo Performance Pack, we’ve created a tuning solution unlike any other. With everything you’ll need installed and set up by one of our Authorised Dealers, we’ve taken the guess-work out of tuning. You can find out more about the Revo Performance Pack for this vehicle, Click here.   SOFTWARE FEATURES SPEED LIMIT UNLOCK The top speed limit for this vehicle has been removed. LEFT FOOT BRAKING Left foot braking has been enabled on this vehicle. TEMPERATURE PROTECTION Enhanced engine cooling and oil temperature management. COLD START PROTECTION Boost is limited until safe oil temperature is reached. SERIAL PORT SWITCH (SPS) Switchable software for 3 performance modes and Antitheft. EXHAUST OVERRUN Enhanced exhaust note on overrun in Sports Mode.   GLOBAL DEVELOPMENT PROGRAMME Only Revo operates a Global Development Programme through its network of over 400 Revo Authorised Dealers worldwide. Access to vehicles on this scale enables the calibration team to fine-tune products before release, testing products in a wide range of climates and conditions including altitude, fuel quality, humidity. This also allows Revo to test how Revo products perform in different driving scenarios and formed a vital part in the development of Performance ECU Software.   POWER GRAPHS   PERFORMANCE TIMES Performance testing was carried out on a private track in the UK with an ambient temperature of 17ºC. 2018 VW Golf R with DSG transmission. Revo Rv019 19" wheels with road tyres, traction control off and 99RON Shell vPower. The average performance times are taken from 5 consecutive runs.   0-60 mph 100-200 kph Stock (Claimed) 4.9 s 14.2 s Revo Performance Pack 3.6 s 8.8 s ADDITIONAL DATA PERFORMANCE DATA Performance data are taken from DynaPack hub dyno, and all figures are quoted at the hub. Revo software comparison is between the previous and new version. Peak Performance: 360HP / 560NM Peak Gains over stock: +75HP/ +189NM Max Gains over stock: +109HP @ 4400RPM / +211NM @ 3900RPM Peak Gains over previous Stage 2: +10HP/ +35NM Max Gains over previous Stage 2: +37HP @ 2800RPM / +93NM @ 2800RPM REQUIRED HARDWARE Revo Performance Pack or Revo Intercooler Revo Downpipe Revo Intake System RECOMMENDED HARDWARE Revo Intercooler Pipe Upgrade Uprated suspension Uprated brakes Uprated engine mounts Revo offers a limited lifetime update for main dealer/factory updates and includes free of charge software updates as they become available. Revo Authorised Dealer labour charges are not included and are at the discretion of the dealer. Read more.   ADDITIONAL FEATURES COLD START PROTECTION FEATURE For engine oil to work effectively and lubricate your engine it needs time to warm up. When you first start your car, the cold oil is at its thickest, producing higher oil pressure when pumped around the engine putting extra pressure on oil seals. As the engine temperature increases, so do the oil temperature. This thins the oil, enabling it to run more freely and better lubricate the moving parts of your engine. Cold Start Protection helps protect engine components by limiting turbo boost until the oil temperature increases and reaches optimum operating levels. Oil below 70ºC: Boost limited Oil above 70ºC: Full boost available TEMPERATURE PROTECTION Testing indicated that in high-temperature conditions (rolling road, high ambient temps, and prolonged Vmax use) oil temperatures can climb to an undesirable level. Revo Temperature Protection is an additional safety feature that reduces overall load as the oil temperature hits a set limit. The oil cooler valve opens sooner with Revo Software to ensure earlier cooling of oil. This feature actively monitors exhaust gas temperatures, adapting the requested load (power) to ensure they stay within safe parameters. If EGT's reach an upper-temperature limit, then power is automatically reduced until the engine returns to a safe operating temperature. EXHAUST OVERRUN The Revo Exhaust Overrun feature offers an audible crackle that's more OEM+ than 'pops and bangs'. The track influenced acoustics are exclusive to Sports Mode and only activated when within safe tolerances. Active during manual gear shifts, throttle lift off during deceleration, whilst extensive development ensures engine safety. Currently only available for vehicles running Performance Pack or Stage 2 software and limited by ECU Identification number. Read more. SWITCHABLE SOFTWARE  Using the Revo SPS Software Switch you can take advantage of the multiple options in your ECU Software. The patented OBD2 interface is the ultimate compliment to Revo performance software, giving you the ability to switch between 3 fuel performance modes and an Anti-Theft mode. SPS Position 1 – Stock Mode SPS Position 2 – 97ron fuel / Regular torque for manual vehicles with stock clutches SPS Position 3 – 98ron+ fuel / Higher torque for DSG or manual vehicles with an uprated clutch. SPS Position 4 – Anti Theft Simply select a program, plug in, wait a few seconds, remove the SPS device and start the car. It's simple and there's no fixed switch to install in the vehicle. TCU Software required for vehicles with the DQ250 DSG6 gearbox. Revo Transmission Control Unit (TCU) Software ensures your gearbox works in harmony with Revo ECU Software to give you access to even more power. Please select the DSG Software | Stage 2 tab at the top of this page for more information. ANTITHEFT MODE Revo Software is installed with a built-in Antitheft Mode, which is accessible with the Revo SPS Software Switch. This mode disables throttle response and limits RPM, adding an extra level of security to your pride and joy.   THE REVO DIFFERENCE OBD PORT INSTALL Revo Software can be installed quickly and safely via the OBD Port without the need to open the ECU. MONEY BACK GUARANTEE We know you'll love how Revo Software transforms your car. If you don't, we'll give you your money back. FUEL ECONOMY Dependant on your driving style, this software will deliver like for like fuel economy in 'normal' driving conditions.

Read more less

STAGE 1 VOLKSWAGEN, GOLF VII R, 2.0 TSI - Pre Facelift 300BHP Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. Stock 310ps  295lbft  REVO Stage 1 Software from 350ps to 375ps from 330lbft to 360lbft   Revo offer some of the most substantial performance increases on the market. How this power is delivered however is far more important to us, which is why peak figures form part of a much bigger picture and are never the sole focus during the development process. it’s all about the drive, and only Revo offers a perfected balance of power, economy and an exciting drive. The Revo tuning philosophy ensures that impressive performance benefits are balanced with useable, reliable power delivery that enhances the way your vehicle drives. Development on the road and race track, as well as testing in controlled dyno conditions, gives you a clearer picture of the performance you can expect from Revo ECU Software. Testing in this way plays an important role in ensuring the highest quality products and delivering the driving experience you demand. Only Revo performance ECU Software maintains factory safety levels and additional driving features, so you can enjoy each mode’s unique characteristics as usual. You can also choose between two pre-set fuel quality modes depending on which fuel you use. If you would like the ability to do this yourself then the Revo SPS Software Switch is also available separately, which can be used to quickly switch fuel modes and access an additional Anti-Theft mode without the need to visit a Revo Authorised Dealer. SOFTWARE FEATURES SPEED LIMIT UNLOCK The top speed limit for this vehicle has been removed. TEMPERATURE PROTECTION Enhanced engine cooling and oil temperature management. COLD START PROTECTION Boost is limited until safe oil temperature is reached. SERIAL PORT SWITCH (SPS) Switchable software for Stock, 2 performance modes and Antitheft.   GLOBAL DEVELOPMENT PROGRAMME Only Revo operates a Global Development Programme through its network of over 400 Revo Authorised Dealers worldwide. Access to vehicles on this scale enables the calibration team to fine-tune products before release, testing products in a wide range of climates and conditions including altitude, fuel quality, humidity. This also allows Revo to test how Revo products perform in different driving scenarios and formed a vital part in the development of Performance ECU Software.   POWER GRAPHS   PERFORMANCE TIMES Performance testing was carried out on a private track in the UK with an ambient temperature of 17ºC. 2014 VW Golf R with DSG transmission. Revo RV019 19" wheels with road tyres, traction control off and 99RON Shell vPower. The average performance times are taken from 5 consecutive runs.   0-60 mph 0-100 mph Stock (Claimed) 4.90 s 12.30 s Revo Performance Pack 3.71 s 9.05 s ADDITIONAL DATA PERFORMANCE DATA Performance data are taken from DynaPack hub dyno, and all figures are quoted at the hub. Revo software comparison is between the previous and new version. Peak Performance: 328HP / 455NM Peak Gains over stock: +53HP/ +81NM Revo offers a limited lifetime update for main dealer/factory updates and includes free of charge software updates as they become available. Revo Authorised Dealer labour charges are not included and are at the discretion of the dealer. Read more.   ADDITIONAL FEATURES COLD START PROTECTION FEATURE For engine oil to work effectively and lubricate your engine it needs time to warm up. When you first start your car, the cold oil is at its thickest, producing higher oil pressure when pumped around the engine putting extra pressure on oil seals. As the engine temperature increases, so do the oil temperature. This thins the oil, enabling it to run more freely and better lubricate the moving parts of your engine. Cold Start Protection helps protect engine components by limiting turbo boost until the oil temperature increases and reaches optimum operating levels. Oil below 70ºC: Boost limited Oil above 70ºC: Full boost available TEMPERATURE PROTECTION Testing indicated that in high-temperature conditions (rolling road, high ambient temps, and prolonged Vmax use) oil temperatures can climb to an undesirable level. Revo Temperature Protection is an additional safety feature that reduces overall load as the oil temperature hits a set limit. The oil cooler valve opens sooner with Revo Software to ensure earlier cooling of oil. This feature actively monitors exhaust gas temperatures, adapting the requested load (power) to ensure they stay within safe parameters. If EGT's reach an upper-temperature limit, then power is automatically reduced until the engine returns to a safe operating temperature. SWITCHABLE SOFTWARE  Using the Revo SPS Software Switch you can take advantage of the multiple options in your ECU Software. The patented OBD2 interface is the ultimate compliment to Revo performance software, giving you the ability to switch between 3 fuel performance modes and an Anti-Theft mode. SPS Position 1 – Stock Mode SPS Position 2 – 97ron fuel / Regular torque for manual vehicles with stock clutches SPS Position 3 – 98ron+ fuel / Higher torque for DSG or manual vehicles with an uprated clutch. SPS Position 4 – Anti Theft Simply select a program, plug in, wait a few seconds, remove the SPS device and start the car. It's simple and there's no fixed switch to install in the vehicle. ANTITHEFT MODE Revo Software is installed with a built-in Antitheft Mode, which is accessible with the Revo SPS Software Switch. This mode disables throttle response and limits RPM, adding an extra level of security to your pride and joy.   THE REVO DIFFERENCE OBD PORT INSTALL Revo Software can be installed quickly and safely via the OBD Port without the need to open the ECU. MONEY BACK GUARANTEE We know you'll love how Revo Software transforms your car. If you don't, we'll give you your money back. FUEL ECONOMY Dependant on your driving style, this software will deliver like for like fuel economy in 'normal' driving conditions.

Read more less

The Revo Big Brake Kit comes complete with everything required to upgrade your stopping power. With Calipers and discs manufactured by industry leaders Alcon® and a floating system designed by our in-house engineers, each kit includes everything you need in one box; brake lines, brake pads, floating discs, mono-bloc calipers, brackets and even brake fluid. Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicles performance. The Revo brake kit is made by world leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in-house development vehicles along with a number of vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALIPERS Our lightweight six pot caliper is a single piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The caliper incorporates a progressive six piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the center of the disc outward to maximise heat dissipation and minimise heat transfer to the calipers, pads, and brake fluid, which plays an all important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads     TECHNICAL DOCUMENTS The following documents are available to view: BIG BRAKE KIT FITTING Download the Revo Big Brake Fitting Instructions BEDDING IN Download the Revo Big Brake Bedding in procedure FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.     FITTING      Manufacturer Model Engine Year Audi A3 (8v) All 12 - Seat Leon MK3 (5F) All 12 - Skoda Octavia Mk3 (5E) All 13 - VW Golf MK7 All 12 -  

Read more less

Only The Driven know that the cooler the air, the more power produced. Revo Intercoolers drastically improve your vehicles ability to cool air compressed by the turbo. Increased volume and surface area, bar and plate cores with end tanks specifically designed to promote even airflow all play a part in lowering temperatures; without negatively affecting pressure. REVO AIR INTERCOOLER MQB 1.8/2.0 TSI EA888 GEN3 The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow by decreasing turbulence and increasing airspeed into the bar and plate core. This enhances charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures by up to 36ºC vs. the MQB Golf R intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & Plate Core Design Fully Cast End Tanks OEM Fitment Up to 51% Increased Core Volume Over 36ºC Lower AIT INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Designed from the ground up, the Revo Intercooler has much larger core volume than the OEM part and offers perfect fitment, improving cooling by utilising the full volume of the stock location space as well as cold ambient air from the front of the vehicle. END TANK DESIGN The stock end tanks are inefficiently designed and create turbulent air in corners. These sections create a natural flow distribution but slow charge air and increase pressure drop. The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core. Coupled with a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions from turbulent air pockets found in the OE intercooler. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR AND PLATE CORE Designed with a bar and plate core to maximise the efficiency of heat transfer, the pressure drop is also controlled as the air meets less resistance compared to that of a tube and fin alternative. The Revo Intercooler also features carefully specified fin geometry to maximise cooling properties while minimising flow restriction. The ambient core side utilises louvred fins to slow ambient air flow which improves heat transfer, while the charge core side features an offset internal fin design to balance surface area and air resistance to minimise pressure drop.   SILICONE HOSES Supplied with stronger oil resistant silicone hoses, the Revo Intercooler can be installed using the stock pipework or recommended Revo Intercooler pipework. The internal diameter of each silicone is precisely matched to the outer diameter of the ribbed inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components.   BRACKETS To ensures precision fitment, Only Revo offers a CNC machined bracket system. Produced to a superior tolerance than that of a cast mounting system, this unique feature also ensures that the supporting brackets are strong and less prone to failure.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout of the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OEM Intercooler with Revo Stage 2 software, a Revo air intake system and Milltek downpipe, the Revo Intercooler was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA Golf GTI with Revo Stage 2 Software, Golf R intercooler and Carbon Series Front Scoop Showing the last of five consecutive dyno runs, the efficiency of the Revo Intercooler over the OEM Golf R intercooler is highlighted. With max gains of +10 HP & +20NM Torque, along with increased performance throughout the entire rev range, the stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout, losing just 2% peak power over the 5 runs compared to 5% on the stock cooler. INLET TEMPERATURE This is a metric used to confirm that testing on the Revo MQB Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the inlet temperatures during testing were hotter on the Revo Intercooler, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency. OUTLET TEMPERETURE This graph illustrates the increased cooling performance of the Revo intercooler vs OEM Golf R intercooler over all five runs. The Revo Intercooler keeps temperatures below 49ºC on the fifth run, lower than the stock on its first at 58ºC.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 8V 1.8 / 2.0TSI 2012 > Audi S3 8V 2.0TSI 2012 > Audi TT / TTS 2.0TSI 2015 > Seat Leon 1.8 / 2.0TSI 2013 > Skoda Octavia 1.8 / 2.0TSI 2013 > Skoda Superb 1.8 / 2.0TSI 2015 > VW Golf Mk7 / Alltrack / Sportwagen 1.8 / 2.0TSI 2013 > VW Golf Mk7 GTI / R 2.0TSI 2014 > VW Passat 1.8 / 2.0TSI 2015 > VW Tiguan 2.0TSI 2016 > VW Touran 2.0TSI 2016 > DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo MQB Golf / Octavia / Leon Intercooler Instructions FITTING INSTRUCTIONS Download the Revo MQB A3 / S3 Intercooler Instructions NOTES Simple replacement of the OEM part Also available for the Golf Mk5/6 MLB Platform Will not fit on cars with O2 sensors fitted without interference on the sensor. It is recommended to speak with your dealer before if you are unsure.

Read more less

STAGE 2 VOLKSWAGEN, GOLF VII R, 2.0 TSI - 2017> 310BHP Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. Stock 310ps  295lbft  REVO Stage 2 Software from 374ps to 401ps from 365lbft to 410lbft   REQUIRED HARDWARE Revo Performance Pack (or) Front Mount Intercooler High Flow Intake Kit Downpipe (Sports or Decat) RECOMMENDED HARDWARE Intercooler Pipe Upgrae Uprated suspension Uprated brakes Uprated Engine Mounts Revo offer some of the most substantial performance increases on the market. How this power is delivered however is far more important to us, which is why peak figures form part of a much bigger picture and are never the sole focus during the development process. it’s all about the drive, and only Revo offers a perfected balance of power, economy and an exciting drive. The Revo tuning philosophy ensures that impressive performance benefits are balanced with useable, reliable power delivery that enhances the way your vehicle drives. Development on the road and race track, as well as testing in controlled dyno conditions, gives you a clearer picture of the performance you can expect from Revo ECU Software. Testing in this way plays an important role in ensuring the highest quality products and delivering the driving experience you demand. Only Revo performance ECU Software maintains factory safety levels and additional driving features, so you can enjoy each mode’s unique characteristics as usual. You can also choose between two pre-set fuel quality modes depending on which fuel you use. If you would like the ability to do this yourself then the Revo SPS Software Switch is also available separately, which can be used to quickly switch fuel modes and access an additional Anti-Theft mode without the need to visit a Revo Authorised Dealer. AVAILABLE AS PART OF A PERFORMANCE PACK   To access the maximum potential of our software, choosing the correct hardware is extremely important. We offer an extensive range of products designed to work in harmony with our software to give you an experience you won't forget. With the Revo Performance Pack, we’ve created a tuning solution unlike any other. With everything you’ll need installed and set up by one of our Authorised Dealers, we’ve taken the guess-work out of tuning. You can find out more about the Revo Performance Pack for this vehicle, Click here.   SOFTWARE FEATURES SPEED LIMIT UNLOCK The top speed limit for this vehicle has been removed. LEFT FOOT BRAKING Left foot braking has been enabled on this vehicle. TEMPERATURE PROTECTION Enhanced engine cooling and oil temperature management. COLD START PROTECTION Boost is limited until safe oil temperature is reached. SERIAL PORT SWITCH (SPS) Switchable software for 3 performance modes and Antitheft. EXHAUST OVERRUN Enhanced exhaust note on overrun in Sports Mode.   GLOBAL DEVELOPMENT PROGRAMME Only Revo operates a Global Development Programme through its network of over 400 Revo Authorised Dealers worldwide. Access to vehicles on this scale enables the calibration team to fine-tune products before release, testing products in a wide range of climates and conditions including altitude, fuel quality, humidity. This also allows Revo to test how Revo products perform in different driving scenarios and formed a vital part in the development of Performance ECU Software.   POWER GRAPHS   PERFORMANCE TIMES Performance testing was carried out on a private track in the UK with an ambient temperature of 17ºC. 2018 VW Golf R with DSG transmission. Revo Rv019 19" wheels with road tyres, traction control off and 99RON Shell vPower. The average performance times are taken from 5 consecutive runs.   0-60 mph 100-200 kph Stock (Claimed) 4.9 s 14.2 s Revo Performance Pack 3.6 s 8.8 s ADDITIONAL DATA PERFORMANCE DATA Performance data are taken from DynaPack hub dyno, and all figures are quoted at the hub. Revo software comparison is between the previous and new version. Peak Performance: 360HP / 560NM Peak Gains over stock: +75HP/ +189NM Max Gains over stock: +109HP @ 4400RPM / +211NM @ 3900RPM Peak Gains over previous Stage 2: +10HP/ +35NM Max Gains over previous Stage 2: +37HP @ 2800RPM / +93NM @ 2800RPM REQUIRED HARDWARE Revo Performance Pack or Revo Intercooler Revo Downpipe Revo Intake System RECOMMENDED HARDWARE Revo Intercooler Pipe Upgrade Uprated suspension Uprated brakes Uprated engine mounts Revo offers a limited lifetime update for main dealer/factory updates and includes free of charge software updates as they become available. Revo Authorised Dealer labour charges are not included and are at the discretion of the dealer. Read more.   ADDITIONAL FEATURES COLD START PROTECTION FEATURE For engine oil to work effectively and lubricate your engine it needs time to warm up. When you first start your car, the cold oil is at its thickest, producing higher oil pressure when pumped around the engine putting extra pressure on oil seals. As the engine temperature increases, so do the oil temperature. This thins the oil, enabling it to run more freely and better lubricate the moving parts of your engine. Cold Start Protection helps protect engine components by limiting turbo boost until the oil temperature increases and reaches optimum operating levels. Oil below 70ºC: Boost limited Oil above 70ºC: Full boost available TEMPERATURE PROTECTION Testing indicated that in high-temperature conditions (rolling road, high ambient temps, and prolonged Vmax use) oil temperatures can climb to an undesirable level. Revo Temperature Protection is an additional safety feature that reduces overall load as the oil temperature hits a set limit. The oil cooler valve opens sooner with Revo Software to ensure earlier cooling of oil. This feature actively monitors exhaust gas temperatures, adapting the requested load (power) to ensure they stay within safe parameters. If EGT's reach an upper-temperature limit, then power is automatically reduced until the engine returns to a safe operating temperature. EXHAUST OVERRUN The Revo Exhaust Overrun feature offers an audible crackle that's more OEM+ than 'pops and bangs'. The track influenced acoustics are exclusive to Sports Mode and only activated when within safe tolerances. Active during manual gear shifts, throttle lift off during deceleration, whilst extensive development ensures engine safety. Currently only available for vehicles running Performance Pack or Stage 2 software and limited by ECU Identification number. Read more. SWITCHABLE SOFTWARE  Using the Revo SPS Software Switch you can take advantage of the multiple options in your ECU Software. The patented OBD2 interface is the ultimate compliment to Revo performance software, giving you the ability to switch between 3 fuel performance modes and an Anti-Theft mode. SPS Position 1 – Stock Mode SPS Position 2 – 97ron fuel / Regular torque for manual vehicles with stock clutches SPS Position 3 – 98ron+ fuel / Higher torque for DSG or manual vehicles with an uprated clutch. SPS Position 4 – Anti Theft Simply select a program, plug in, wait a few seconds, remove the SPS device and start the car. It's simple and there's no fixed switch to install in the vehicle. TCU Software required for vehicles with the DQ250 DSG6 gearbox. Revo Transmission Control Unit (TCU) Software ensures your gearbox works in harmony with Revo ECU Software to give you access to even more power. Please select the DSG Software | Stage 2 tab at the top of this page for more information. ANTITHEFT MODE Revo Software is installed with a built-in Antitheft Mode, which is accessible with the Revo SPS Software Switch. This mode disables throttle response and limits RPM, adding an extra level of security to your pride and joy.   THE REVO DIFFERENCE OBD PORT INSTALL Revo Software can be installed quickly and safely via the OBD Port without the need to open the ECU. MONEY BACK GUARANTEE We know you'll love how Revo Software transforms your car. If you don't, we'll give you your money back. FUEL ECONOMY Dependant on your driving style, this software will deliver like for like fuel economy in 'normal' driving conditions.

Read more less