Airtec Shop

AIRTEC Motorsport hot side lower boost pipe for Fiesta ST 180. Designed to increase airflow on the Fiesta ST 180 as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport hot side boost pipe creates a much smother air flow by replacing the restrictive bends and smaller diameter pipe. Features: Swaged ends to prevent blowing of on bigger power cars. Will work perfect with standard or re-mapped Fiesta ST's. To fit with both, stock and AIRTEC intercooler. Resonator delete. Fitting takes less than 30 minutes to install and fits to standard boost hoses. 52mm pipe throughout, compared to the restrictive 42mm resonated standard pipe. AVAILABLE ONLY IN SILVER FINISH

Read more less

AIRTEC Motorsport hot side lower boost pipe for Fiesta MK8 ST-200   Designed to increase airflow on the Fiesta MK8 ST-200 as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport hot side boost pipe creates a much smother air flow by replacing the restrictive bends and smaller diameter pipe.   Features: Swaged ends to prevent blowing of on bigger power cars. Will work perfect with standard or re-mapped Fiesta ST's. To fit with both, stock and AIRTEC intercooler. Resonator delete. Fitting takes less than 30 minutes to install and fits to standard boost hoses.   52mm pipe throughout, compared to the restrictive 42mm resonated standard pipe. AVAILABLE ONLY IN SILVER FINISH Registered Design Right number:

Read more less

NOW ONLY AVAILABLE IN ALL BLACK AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180/ST200 Please note, this item is a symposer DELETE only – Now only available in Pro-Series Black TECHNICAL DATA AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180 / ST200 Kit includes: 1 hard pipe, 2 Pro Hoses silicone hose & free jubilee clips. This kit is designed for the modified Fiesta ST. All pipes have swaged ends to stop the pipes blowing off. 2.5″ bore pipework. Comes in Pro-Series Black Please note, this item is a symposer DELETE only – Now only available in Pro-Series Black AIRTEC part no: ATMSFO78

Read more less

As part of our expanding Fiesta Mk8 ST product range, AIRTEC Motorsport are proud to launch our enlarged hot side suitable for track or fast road use. A direct replacement part that gives increases in response and sound by eliminating the internal sound suppressors built into the original boost pipe from the turbo. Ford fit these suppressors to reduce noise and resonation but by replacing the pipe for one without the baffled internals, flow and internal capacity is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. Made from high quality aluminium, the pipe also offers a 43% increase in size, maintaining a constant 57mm internal diameter throughout, compared to the 40mm of the standard item, and features a design with less bends and restrictions. It also features a powder-coated black finish for a subtle OEM+ look. The comprehensive package includes a Pro Hoses silicone connector and all fixtures and fittings, which makes installation a simple task. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport enlarged induction pipe is an essential modification for modified cars. Specification: 43% increase in internal diameter Removes original resonator Increases response and sound Larger overall capacity and freer-flowing design Improves flow from turbo Direct replacement fitment High quality aluminium connector Long lasting, high quality black powder coat finish Includes all fixtures and fittings Features detailed fitting guide

Read more less

As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our big boost pipe kit for the ST suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original pipework to allow more flow and capacity whilst reducing restriction and improving response. AIRTEC Part No: ATMSFO132 TECHNICAL DATA As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our big boost pipe kit for the ST suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original pipework to allow more flow and capacity whilst reducing restriction and improving response. The comprehensive 11-piece kit features three pipes constructed from lightweight aluminium for improved strength so they will not fail with higher boost pressure, six Pro Hoses silicone joiners as well as two CNC-machined connectors to make fitting as simplistic as possible. On the hot side coming from the turbo, the original pipework is 55mm and features an indented section which restricts flow, where as our enlarged replacement kit features a 60mm internal diameter from start to finish with no restrictions. For the cold side to the throttle body, the original pipework begins at 55mm and tapers to 63mm in diameter, but out replacement features a 63mm internal diameter throughout, increasing both flow and capacity. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. A must have for any modified Mk4 ST to help the improve the boost pipework’s flow and efficiency. Features: • Comprehensive 11-piece kit designed specifically for the Mk4 Focus ST• Larger internal diameter pipework offers improved flow• Lightweight aluminium construction for increased strength• Precision engineered CNC connectors• Comes complete with all fixtures and fittings   AIRTEC Part No: ATMSFO132

Read more less

SUPPLIED WITH BLACK PIPEWORK AND BLACK SILICONE AIRTEC Motorsport big boost pipe kit for the MQB EA888 platform. Designed to increase power and torque figures by replacing the standard restrictive boost pipes and improving flow. Registered Design Right number: 6046416 Please note: designed to fit onto original OEM size intercooler outlets AIRTEC part no: ATMSVAG4 TECHNICAL DATA AIRTEC Motorsport big boost pipe kit for the MQB EA888.3 platform. Designed to increase power and torque figures by replacing the standard restrictive boost pipes and improving air flow. With larger internal diameters on the pipework, less restriction means a smoother air flow and an increase of power. Kit comprises of smooth larger, mandrel bent hard pipes and is supplied with a full set of Pro Hoses silicone hoses including from the turbo outlet to the hot-side boost pipe. The AIRTEC big boost pipe kit is designed as a direct replacement of the OEM parts, eliminating restrictions found on the stock charge pipe while allowing enough clearance from engine parts, increasing performance in the process. We have designed the kit using 63mm hot-side pipework to keep air speed high and reduce the effects of turbo lag on big power cars. For the cold-side pipework this increases to a massive 70mm to ensure maximum air flow and volume is achieved at the throttle body to maximise performance. PLEASE NOTE: Intercooler NOT included, big boost pipe kit ONLY. Also supplied with new stainless steel jubilee clips. Fits the following vehicles: Volkswagen Golf Mk7/7.5 R – 2.0 TSI Volkswagen Golf Mk7/7.5 GTI incl. Clubsport and Clubsport S – 2.0 TSI Seat Leon Cupra 265/280/290/300 – 2.0 TSI Seat Leon – 1.8/1.9/2.0 TSI Audi S3 8V (Hatchback and Saloon variants) – 2.0 TSI Audi TTS 8S – 2.0 TSI Audi TT 8S – 1.8/2.0 TSI Audi A3 8V – 1.8/2.0 TSI Audi S3 8V 2.0 TSI Audi TT/TTS 2.0 TSI Skoda Octavia vRS 1.8/2.0 TSI VW Golf MK7 / All road / Sportwagenn 1.8/2.0 TSI VW Golf GTi/R 2.0 TSI Please note: designed to fit onto original OEM size intercooler outlets Registered Design Right number: 6046416 AIRTEC part no: ATMSVAG4

Read more less

TECHNICAL DATA Why not add top alloy boost pipe kit for just £129.95 which includes 2 x alloy boost pipes, 1 x silicone joiner and stainless jubilee clips. Fits Citreon DS3, Peugeot 207 GTI, Peugeot 208 GTI. Part no: ATINTP&C4

Read more less

AIRTEC Motorsport cold side boost pipes for Renault Clio 200 / 220 EDC. To replace the standard plastic pipes, known to fail! Features of cold side: Bigger diameter pipe onto the throttle body, AIRTEC pipe 63.5mm compared to standard 60mm. To replace the standard plastic pipes known to fail due to heat soak, standard pipes are known to blow off and cause a loss of boost. Will fit all intercooler kits, designed to follow standard path. Registered Design Right number: 6030033

Read more less

AIRTEC Motorsport hot side big boost pipe to fit Revo Fiesta ST S242 turbo kit Kit includes: 1 2.5″ alloy hard pipe 1 Pro Hoses silicone hose with stainless steel jubilee clips Swaged ends to ensure that boost pipes won’t pop off This kit is designed to fit a modified Fiesta ST fitted with the Revo S242 turbo upgrade Comes in silver alloy finish, supplied with black silicone hoses to match Revo’s turbo kit Please note: we do not replace the silicone hose from Revo turbo to the AIRTEC big boost pipe kit Optional cold side, to make complete big boost pipe kit Hose colour shown for illustraion purposes only (Hose Included With Kit Is Gloss Black)

Read more less

The AIRTEC Motorsport big boost pipe kit is a must for all remapped RS’, everything you need is included in the kit. Features: Hot side (Turbo to Intercooler) is made from 2.5″ light weight alloy and connected with 5 ply silicon hose joiners. Will fit the following intercoolers: AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5″ hard pipe upgrade removes Ford’s 2.0″ restrictive boost pipes. We saw gains of 11.8 bhp & 9 lb/ft torque increase’s over the standard Ford pipes and these gains were achieved by simply bolting on the kit – including the additional cold side pipe. This kit is designed for BIG BHP Focus RS’ and will work best on 375bhp and over, was tested on our 400bhp demo car. All pipes have swaged ends to stop the pipes blowing off on BIG BHP Focus RS’. Fitting takes approx 1 hour. For Focus ST 225 – MUST Be fitted with 2.5″ outlets on intercooler. Stock ST intercooler is 2″.*Will not fit Focus ST Stage 1/2 intercooler. Will fit focus ST Stage 3 intercooler.

Read more less

A direct replacement part that gives increases in response and sound by eliminating the internal sound resonators built into the original boost pipe from the turbo. The manufacturer fits these resonators to reduce noise and quieten the tone, but by replacing the pipe for one without the baffled internals, flow is improved, as well as noise. This increases throttle response and heightens the soundtrack from within the car. The pipe is made from high-quality aluminium with a machined connector to fit the original fitting and is finished in powder coated black with a laser-cut plaque. The installation package includes all fixtures and fittings, as well as detailed installation instructions. With valuable performance gains and an improved soundtrack, the AIRTEC Motorsport de-res pipe kit is an essential modification. Features: Increases response and sound Improves flow from turbo Direct replacement fitment High quality aluminium construction Powder coat black finish Includes all fixtures and fittings Features detailed fitting guide Fitment: BMW 1 Series – F52 – (10/2015 to 12/2019) BMW 1 Series – F44 Gran Coupé – (10/2018 to 12/2019) BMW 1 Series – F45 Active Tourer – (11/2013 to 04/2018) BMW 1 Series – F45 Active Tourer LCI – (05/2017 to 12/2019) BMW 1 Series – F46 Gran Tourer – (07/2014 to 03/2018) BMW 1 Series – F46 Gran Tourer LCI – (05/2017 to 12/2019) BMW X1 – F48 – (11/2014 to  06/2019) BMW X1 – F48 LCI – (05/2018 to 01/2020) BMW X1 – F49 – (11/2014 to 08/2019) BMW X1 – F49 LCI – (05/2018 to 12/2019) BMW X2 – F39 – (10/2016 to 12/2019) MINI F56 – (04/2013 to 12/2019) MINI F55 – (09/2013 to 12/2019) MINI Clubman F54 – (11/2014 to 07/2019) MINI Clubman F54 LCI – (05/2018 to 12/2019) MINI Cabriolet F57 – (11/2014 to 12/2019) MINI Countryman F60 – (11/2015 to 01/2020)  Only in Pro-Series Black, silver for photo purposes only.  AIRTEC part no: ATMSMINI15

Read more less

This 2.5″ big boost pipe kit is a must for a remapped RS, everything you need is included in the kit Features: 2.5″ light-weight alloy hard pipes connected with Pro Hoses 5 ply silicone hoses Available in Pro-Series Black or Motorsport Silver pipework Will fit with the following intercoolers: AIRTEC Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5″ hard pipe upgrade removes Ford’s 2.0″ restrictive boost pipes and is ‘bolt on power’ This kit is designed for BIG BHP / Remapped Focus RS’s. All pipes have swaged ends to stop the pipes blowing off on higher power cars. Fitting takes 1 – 2 hours. Registered Design Right number: 6022646 AIRTEC part no: ATMSFO81

Read more less