Airtec Shop

As part of our expanding Yaris GR Gen 2 product range, AIRTEC Motorsport is proud to launch our big boost pipe kit upgrade suitable for track or fast road use. A direct replacement kit that offers increases in performance and response, the enlarged boost pipe kit features a freer-flowing design with a increased internal diameter on both the hot side and cold side. Our comprehensive kit begins with a gentle taper from the 40mm turbo outlet that increases by 25% to reach 50mm as it meets the AIRTEC Motorsport intercooler inlet side.From the intercooler’s 60mm outlet side, the pipework tapers back down to meet the throttle body’s 49.5mm size, maintaining a 53mm minimum as it reaches the new cast aluminium throttle body elbow. In doing so, it offers up to a 39% increase in internal diameter during the most restrictive part of the OEM pipework (38mm) just before the throttle body elbow. This increased overall internal volume and improved design works to reduce restriction and improve flow from the turbo and to the inlet, providing an increase in power and response. Made from high quality aluminium, the kit includes a revised throttle body elbow, a series of high-quality silicone connectors and all pipework is finished in powder-coated black for a subtle OEM+ look. The installation package includes all fixtures and fittings, and detailed instructions. With valuable performance gains, the AIRTEC Motorsport enlarged boost pipe kit is an essential modification. Will fit both stage 1 & stage 3 intercooler.  Features: Designed specifically for Gen 2 models 50% increase in cold side pipe Up to 39% increase in bore size Larger and freer-flowing design Comprehensive eight-piece kit Improves flow from the turbo to the inlet Increases mid-range performance Direct replacement fitment Made from high quality aluminium Powder-coated black finish Includes all fixtures and fittings Features detailed fitting guide  Registered Design Right number: Application Pending AIRTEC Part No: ATMSYGR26

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our direct replacement panel air filter and intake pipe upgrade for the FL5 Civic Type R model, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a simple yet effective solution to improving the car’s original air intake system to allow more flow, whilst improving response. Featuring a freer-flowing panel filter that fits inside the original air box, as well as an optional accompanying Pro Hoses silicone intake pipe, the kit offers a valuable improvement over standard. The kit requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions.   Features: Simple and effective upgrade designed especially for the FL5 platform Fits inside original air box for an improvement over standard Optional freer-flowing Pro Hoses intake pipe Improved throttle response Includes all fixtures and fittings Features detailed fitting guide   AIRTEC Part No: ATIKHON04

Read more less

 Inspired by the BMW M4 GTS track car’s flat under floor section that was designed to improve aerodynamics and stability on track, we designed our own version to fit all F82/F83 M4, F80 M3 and F87 M2 Competition models. Like the M4 GTS, our aero under tray fits over the existing reinforcement panel and covers the car’s front section to offer a solid and level floor section that spans to create a low pressure area and reduce drag. Made from 2mm aluminium for strength and finished in black powder coat, it also offers improved protection to the car’s underside. The panel will fit with the original front oil cooler under tray section or with our AIRTEC Motorsport upgraded version. Features: -Suitable for all F82 M4, F80 M3 and F87 M2 Competition models-Inspired by original BMW M4 GTS track car flat under floor section-Improves aerodynamics by creating a low pressure area to reduce drag-Offers improved protection to the car’s underside -Fits original front under tray & the AIRTEC Motorsport upgrade-Made from high-quality 2mm aluminium for strength-Uses original mounting points with new fixings supplied-Comes in a durable black powder coat finish-Fitting instructions included AIRTEC part no: ATMSBMW50

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch the direct replacement aluminium under tray for the BMW F80 M3 and F82/F83 M4 models. The solution to creating a direct replacement under tray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points. As a result, it requires no drilling or cutting and is completely reversible if required.  Designed to work with the AIRTEC Motorsport larger capacity oil cooler, which when fitted in place with the original plastic under tray causes to bow outwards due to the oil cooler’s larger size and the BMW under tray’s weak construction. Our direct replacement under tray is made from 2mm aluminium to ensure durability and has also been designed to accommodate the larger dimensions of the AIRTEC Motorsport oil cooler. The product also comes with pre-cut rubber trims to seal the under tray and ensure the cooling effectiveness with the options of a larger rubber trim for the original oil cooler or a smaller rubber trim for the AIRTEC Motorsport oil cooler both inside the box. It has also been designed to work with the AIRTEC Motorsport GTS-style aero under tray pan to create a comprehensive under tray package.  Finished in a high-quality black powder coat finish, the under tray offers improved protection, durability and cooling effectiveness. Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original BMW fittings should only be used if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from BMW, as failure to do so may cause the under tray to work loose. Features: · Direct replacement for F80 M3 and F82/F83 M4 models · Created from 3D scan and CAD software for perfect fitment · Designed to work with the AIRTEC Motorsport larger capacity oil cooler · Made from high-quality 2mm aluminium for increased strength   Rubber trims to seal the under tray and ensure cooling effectiveness · Uses original mounting points – no cutting or drilling required   Also works with the AIRTEC Motorsport GTS-style aero under tray pan · Comes in a durable black powder coat finish AIRTEC part no: ATMSBMW34

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our aluminium cooling under tray for the Civic FK8 Type R. When modifying these cars to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as coolant temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. As a result, we wanted to address the car’s entire cooling system, which included introducing extra venting to improve air flow within the engine bay. Our solution to creating a direct replacement under tray in 2mm aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points with new stronger fixings supplied, offering improved strength and protection for the underside of the car. More importantly, the large functional vents actively help to pull warm air from the back of the radiator, down under the engine and into the low-pressure area of the car below the under tray. This effectively creates an increased flow path within the engine bay to transfer heat out, helping to reduce engine running temperatures. Designed to work on a standard car or even more effectively in conjunction with our soon to be released AIRTEC Motorsport gearbox cooler, the under tray is finished in a high-quality black powder coat finish, offering improved cooling effectiveness as well as strength and durability. What does an under tray do?The under tray has three main purposes: to protect the underside of the vehicle from foreign objects flicking up and causing damage or accelerated wear. Secondly, to improve aerodynamics by creating a low pressure area as air accelerates past its smooth surface. This reduces drag, which works towards improving grip, handling as well as fuel efficiency. Lastly, on performance models, the under tray often provides increased cooling by either venting cold air to, or extracting warm air from the engine bay. Therefore improving the strength, design, size and cooling effect can offer fantastic benefits. Features: Direct replacement for original Honda Civic FK8 Type under tray Effectively improves engine bay cooling due to functional vents Created from 3D scan and CAD software for perfect fitment Made from high-quality 2mm aluminium for increased strength Uses original mounting points with new stronger fixings supplied Comes in a durable black powder coat finish Fitting instructions included AIRTEC part no: ATMSHON19

Read more less

PLEASE NOTE: Does not fit with aftermarket radiator, will only with with OEM radiator. Following an extensive development process, AIRTEC Motorsport are proud to launch our auxiliary radiator/turbo cooler kit aimed at FK2 Civic Type R owners who require the ultimate cooling package to maintain steady running temperatures on track or fast road use. The ChallengeWhen modifying the FK2 Civic Type R to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. The SolutionDeveloped in-house at AIRTEC HQ in the UK we designed an auxiliary radiator to help address the cooling issues when pushed hard. This additional radiator fits neatly behind the fog light (requires removal) and utilises our bespoke CAD-modelled air duct to force cold air through the radiator. To create a flow path and further improve cooling, air then exits via the inner arch liner (requires cutting). A pre-cut mesh shield is supplied for both the front and rear to protect the radiator from road debris damage. This radiator is plumbed directly into the cooling circuit that flows coolant to the turbo, therefore offering an immediate reduction in temperature to help counteract the effects of the coolant being superheated as it passes through the turbo; the hottest part of the engine bay. This helps improve overall capacity and cooling ability, allowing the car to maintain a steadier temperature for longer during hard use. This can fit with our intercooler and  oil cooler to create the ultimate cooling package. The comprehensive kit also features laser-cut and powder-coated brackets, high-quality Pro Hoses silicone lines as well as all fixtures and fittings, and detailed fitting instructions. Tested on Track20th June 2025 – Cadwell Park CircuitData logged via OBD port using Torque Pro app data recording feature and downloaded to PC. Run 1 – 10.00am – Ambient Temperature: 24°C – 15 minute session – Maximum Oil Temperature: 106°C Run 2 – 10:45am – Ambient Temperature: 25°C – 20 minute session – Maximum Oil Temperature: 112°C  Run 3 – 11:30am – Ambient Temperature: 27°C – 15 minute session – Maximum Oil Temperature: 112°C Run 4 – 12:00pm – Ambient Temperature: 28°C – 20 minute session – Maximum Oil Temperature: 114°CRun 5 – 2.00pm – Ambient Temperature: 29°C – 15 minute session – Maximum Oil Temperature: 118°C Run 6 – 2:45pm – Ambient Temperature: 30°C – 20 minute session – Maximum Oil Temperature: 117°CRun 7 – 3:30pm – Ambient Temperature: 28°C – 15 minute session – Maximum Oil Temperature: 113°C  Driver Comments:“This was an extremely hot day and car coped very well. Before the auxiliary radiator and oil cooler were installed I would normally get approximately 5 to 6 laps, which is about 8 to 10 minutes of hard use before the oil temperature rose to around the 126 to 128°C. With the coolers installed, I can run at least 10 to 14 laps, which is over 20 minutes of hard use, and oil temperatures don’t normally go above 115°C. Also a major advantage is that I can repeat that all day long, whereas before I found that once the temperature of the oil got really hot it would normally not cool down enough for the rest of the day,  so it meant I ended up doing only 3 to 4 laps before the temperature rose again, as the oil never fully cooled down and seemed to heat back up quicker.”   Features: Designed and developed specifically for the FK2 Civic Type R Improves both cooling capacity and ability Utilises our bespoke CAD-modelled air duct Ducting channels air in and allows it to exit via arch liner Tested on track and proven to work Bespoke laser-cut and powder coated brackets High-quality Pro Hoses silicone lines Fits with our intercooler and oil cooler kit to create the ultimate cooling package Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATRADHON02

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our aluminium inspection panel/under tray for the Civic FK2 Type R. When modifying these cars to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as coolant temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. As a result, we wanted to address the car’s entire cooling system, which included introducing extra venting to improve air flow within the engine bay. Our solution to creating a direct replacement inspection panel/under tray in 2mm aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points with new stronger fixings supplied, offering improved strength and protection for the underside of the car. More importantly, the large functional vents actively help to pull warm air from the back of the radiator, down under the engine and into the low-pressure area of the car below the inspection panel/under tray. This effectively creates an increased flow path within the engine bay to transfer heat out, helping to reduce engine running temperatures. Finished in a high-quality black powder coat finish, the inspection panel/under tray offers improved cooling effectiveness as well as strength and durability.  What does an under tray do?The under tray has three main purposes: to protect the underside of the vehicle from foreign objects flicking up and causing damage or accelerated wear. Secondly, to improve aerodynamics by creating a low pressure area as air accelerates past its smooth surface. This reduces drag, which works towards improving grip, handling as well as fuel efficiency. Lastly, on performance models, the under tray often provides increased cooling by either venting cold air to, or extracting warm air from the engine bay. Therefore improving the strength, design, size and cooling effect can offer fantastic benefits.   Features: Direct replacement for original Honda Civic FK2 Type R inspection panel  Effectively improves engine bay cooling due to functional vents Created from 3D scan and CAD software for perfect fitment Made from high-quality 2mm aluminium for increased strength Uses original mounting points with new stronger fixings supplied Comes in a durable black powder coat finish Fitting instructions included AIRTEC part no: ATMSHON21

Read more less

Following an extensive development process, AIRTEC Motorsport are proud to launch our oil cooler kit aimed at FK2 Civic Type R owners who require the ultimate cooling package to maintain steady running temperatures on track or fast road use. The ChallengeWhen modifying the FK2 Civic Type R to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode.  The SolutionDeveloped in-house at AIRTEC HQ in the UK we designed an oil cooler to help address the cooling issues when pushed hard. This cooler fits neatly behind the fog light (requires removal) and utilises our bespoke CAD-modelled air duct to force cold air through the core. To create a flow path and further improve cooling, air then exits via the inner arch liner (requires cutting). A pre-cut mesh shield is supplied for both the front and rear to protect the radiator from road debris damage. This can fit with our intercooler and auxiliary radiator/turbo cooler to create the ultimate cooling package. The comprehensive kit also features laser-cut and powder-coated brackets, high-quality braided lines with AN fittings as well as all fixtures and fittings, and detailed fitting instructions. Tested on Track20th June 2025 – Cadwell Park CircuitTest car fitted with air filter and Stage 1 remap producing a dyno proven 375bhpData logged via OBD port using Torque Pro app data recording and downloaded to PC. Run 1 – 10.00am – Ambient Temperature: 24°C – 15 minute session – Maximum Oil Temperature: 106°C Run 2 – 10:45am – Ambient Temperature: 25°C – 20 minute session – Maximum Oil Temperature: 112°C  Run 3 – 11:30am – Ambient Temperature: 27°C – 15 minute session – Maximum Oil Temperature: 112°C Run 4 – 12:00pm – Ambient Temperature: 28°C – 20 minute session – Maximum Oil Temperature: 114°C  Run 5 – 2.00pm – Ambient Temperature: 29°C – 15 minute session – Maximum Oil Temperature: 118°C Run 6 – 2:45pm – Ambient Temperature: 30°C – 20 minute session – Maximum Oil Temperature: 117°C Run 7 – 3:30pm – Ambient Temperature: 28°C – 15 minute session – Maximum Oil Temperature: 113°C  Driver Comments: “This was an extremely hot day and car coped very well. Before the auxiliary radiator and oil cooler were installed I would normally get approximately 5 to 6 laps, which is about 8 to 10 minutes of hard use before the oil temperature rose to around the 126 to 128°C. With the coolers installed, I can run at least 10 to 14 laps, which is over 20 minutes of hard use, and oil temperatures don’t normally go above 115°C. Also a major advantage is that I can repeat that all day long, whereas before I found that once the temperature of the oil got really hot it would normally not cool down enough for the rest of the day,  so it meant I ended up doing only 3 to 4 laps before the temperature rose again, as the oil never fully cooled down and seemed to heat back up quicker.” Features: Designed and developed specifically for the FK2 Civic Type R Improves oil cooling ability – tested on track and proven to work Utilises our bespoke CAD-modelled air duct Ducting channels air in and allows it to exit via arch liner Bespoke laser-cut and powder coated brackets High-quality braided lines with AN fittings Fits with our intercooler and auxiliary radiator/turbo cooler kit to create the ultimate cooling package Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSHON7

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our replacement uprated radiator for the Yaris GR Gen 1 and Gen 2 models, suitable for track or fast road use. With huge experience in developing uprated radiators for a variety of modified track and road cars, we chose to create a direct replacement radiator with a much deeper core to make the most of the space available in the original location. As a result, our radiator offers a huge capacity increase, thanks to a core that measures 48% bigger than the standard Toyota core. Frontal surface area has also increased in size to make the most of the air flow provided. Our lightweight radiator solution also features a tube-and-fin aluminium construction together with welded aluminium end tanks. This design increases the cooling system’s capacity as well as improving its efficiency, allowing it to retain lower running temperatures compared to an original unit during prolonged or hard use. It’s also suited to modified or track orientated vehicles that operate with constant higher temperatures, or for hotter climate countries, where cooling can be an issue. Designed as a direct replacement item, fitting is a simple process, making it a great addition to improve cooling. Dimensions: Original Toyota Radiator:Width: 624mmHeight: 410mmDepth: 28mmCapacity: 7.16 litresFrontal Area: 256cm² AIRTEC Motorsport Radiator:Width: 624mmHeight: 426mmDepth: 40mmCapacity: 10.6 litresFrontal Area: 266cm² Features: 48% increase in capacity over original Toyota radiator Increased frontal area for improved air flow Larger 40mm tube-and-fin core design Lightweight aluminium construction Improved cooling efficiency Connects to original mounts and connectors Comes with detailed fitting instructions Direct replacement with no cutting or trimming AIRTEC part number: ATRADYGR3

Read more less

  Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our ultimate specification intercooler kit with integrated crash bar design aimed at modified Toyota Yaris GR Gen 2 owners who want the very highest levels of cooling efficiency and performance for track or fast road use. The ChallengeOur earlier Stage 1 intercooler was developed to cater for tuned Yaris GR models of the time and has become a popular upgrade. However, Yaris GR tuning potential has since evolved and it became clear we would need a more substantial intercooler package better suited to big power, heavily tuned cars whilst future-proofing them for further tuning development. The SolutionAs a result, we developed the biggest intercooler kit we could and made the most of the available space behind the bumper by using a stepped core design that would rise up behind the entire front grille area. Using our experience in developing intercooler kits that integrate a replacement crash bar design, we were able to CNC machine billet brackets that allowed the intercooler to bolt in place. By doing so, the new intercooler offers a huge 143% increase in overall capacity in comparison to the original intercooler (54% bigger than our Stage 1 kit), and also features a colossal 115% increase in frontal area over standard (78% over our Stage 1), which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the Stage 3 AIRTEC Motorsport intercooler also features an enlarged 60mm inlet to match the outlet, and together the kit offers much greater efficiency and volume over both the standard and our Stage 1 intercoolers, which it proved during testing. Available in a high-quality powder coated black finish, the comprehensive kit is a direct replacement and comes complete with Pro Hoses silicone connectors to adapt to standard boost pipes – . It also comes complete with all fixtures and fittings, as well as detailed fitting instructions. To suit the Gen 2 model, the kit is also supplied with an extra mounting bracket to allow the original water spray system to be retained. A must have modification for those looking for only the very best for their modified Yaris GR models. The TestingDuring track testing at Snetterton Circuit in the UK using our 420bhp AIRTEC Motorsport development car, we logged the inlet and outlet temperatures of both our Stage 1 and Stage 3 intercoolers back-to-back. The figures showed that at this high level of power, over the course of a hot lap the Stage 1 starts to fight maintaining a stable charge temperature, with a 15-degree range highlighting its battle against the high and sustained levels of boost pressure. However, with the Stage 3 intercooler fitted, the figures showed the larger core with increased air flow provided a much more consistent charge temperature throughout the test, highlighted with just a 5-degree range in temperature. Verdict: Both intercoolers demonstrate a high level of efficiency, reducing charge air temperature by over 200 degrees and equating to over 90% efficiency, but the Stage 3 could sustain that level for longer, which is crucial for highly tuned cars to run safely for extended periods of time. T1 – TEMPERATURE INT2 – TEMPERATURE OUT Dimensions:OEM intercoolerWidth: 645mmHeight: 145mmDepth: 80mmCapacity: 7.5 litresFrontal area: 9,353cm² AIRTEC Motorsport intercoolerWidth: 610mmHeight: 330mmDepth: 110mm to 70mm stepped coreCapacity: 18.2 litresFrontal area: 20,130cm² Features: Specifically designed for the Yaris GR Gen 2 model Tried and tested to perform on heavily tuned cars 143% increase in overall capacity in comparison to original 115% increase in frontal area over standard Enlarged inlet pipe to 60mm Huge increase in cooling ability Incorporated crash bar design High-flow, moulded one-piece cast end tanks Gen 2 water spray system retained Powder coated black finish Includes fittings and fixtures Detailed fitting guide included   Please note: will NOT fit with AIRTEC Motorsport Oil Cooler (ATMSYGR04). Will fit with Stage 3 Oil Cooler (ATMSYGR14); now available.   AIRTEC Part No: ATINTYGR4

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our replacement uprated radiator for the Focus RS Mk3 model, suitable for track or fast road use. With huge experience in developing uprated radiators for a variety of modified track and road cars, we chose to create a direct replacement radiator with a larger core to make the most of the space available in the original location. As a result, our radiator offers a huge capacity increase, thanks to a core that measures 15% bigger than the standard Ford core, which is ideal if your Focus RS is modified to produce more power as logically more cooling is also required Our lightweight radiator solution also features a tube-and-fin aluminium construction together with welded aluminium end tanks. This design increases the cooling system’s capacity as well as improving its efficiency, allowing it to retain lower running temperatures compared to an original unit during prolonged or hard use. It’s also suited to modified or track orientated vehicles that operate with constant higher temperatures, or for hotter climate countries, where cooling can be an issue. Designed as a direct replacement item, fitting is a simple process, making it a great addition to improve cooling. Dimensions:Width: 675mmHeight: 480mmDepth: 40mmCapacity: 12.99 litresOriginal Ford radiator capacity: 11.34 litres Features: 15% increase in capacity over original Ford radiator Larger 40mm tube-and-fin core design Lightweight aluminium construction Improved cooling efficiency Connects to original mounts and connectors Direct replacement with no cutting or trimming AIRTEC part number: ATRADFO15

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Fiesta 1.0 EcoBoost Mk7 model suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. This is particularly prevalent with the EcoBoost engine, which can be known for poor reliability without good preventative maintenance.   AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Fiesta 1.0 EcoBoost Mk7 model utilises the heat shield from our AIRTEC Motorsport Stage 2 induction kit to attach the mounting bracket. As a result, it requires the induction kit to be fitted first and will not work with other induction kits or the original air box.  It features a high-quality laser cut bracket finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. PLEASE NOTE: This kit is designed to fit ONLY with our AIRTEC Motorsport Stage 2 Induction Kit for Fiesta Mk7 1.0 EcoBoost. It attaches to the shield and therefore will NOT fit with any other type of induction kit or with the original air box.  Features: Developed specifically for the Fiesta 1.0 EcoBoost Mk7 Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSFO160

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk4 Focus ST owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit 2.3-litre ST models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit. A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Additional fuel rail available separately here. Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included AIRTEC part no: ATMSFO152

Read more less

  As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our Crank Case Ventilation (CCV) oil catch can upgrade for the Civic Type R FL5 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. The Honda Civic Type R FL5 features both of these, so we’ve developed kits to cater for each and recommend fitting both for ultimate protection. AIRTEC Motorsport’s solution to developing a CCV catch can kit specifically for the Civic Type R FL5 model utilises the available space at the rear of the engine bay to integrate seamlessly. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a Crank Case Ventilation catch can?The CCV port vents directly from inside the engine’s crank case to the intake system and when under heavy load, such as full throttle, allows significant blow-by gases and vapour to pass, which is what creates the undesirable carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Please note: This currently will only fit with the original turbo inlet pipe. If you have an aftermarket turbo inlet pipe fitted, a relocation mounting bracket will be available soon.  Features: Developed specifically for the Honda Civic Type R FL5 CCV side Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC part no: ATMSHON12

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our aluminium cooling under tray for the Civic FL5 Type R. When modifying these cars to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as coolant temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. As a result, we wanted to address the car’s entire cooling system, which included introducing extra venting to improve air flow within the engine bay. Our solution to creating a direct replacement undertray in 2mm aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points with new stronger fixings supplied, offering improved strength and protection for the underside of the car. More importantly, the large functional vents actively help to pull warm air from the back of the radiator, down under the engine and into the low-pressure area of the car below the under tray. This effectively creates an increased flow path within the engine bay to transfer heat out, helping to reduce engine running temperatures. Designed to work on a standard car or even more effectively in conjunction with our AIRTEC Motorsport gearbox cooler, the under tray is finished in a high-quality black powder coat finish, offering under tray offers improved cooling effectiveness as well as strength and durability. Features: Direct replacement for original Honda Civic FL5 Type under tray Effectively improves engine bay cooling due to functional vents Created from 3D scan and CAD software for perfect fitment Made from high-quality 2mm aluminium for increased strength Uses original mounting points with new stronger fixings supplied Comes in a durable black powder coat finish Fitting instructions included AIRTEC part no: ATMSHON14

Read more less

  As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our Positive Crankcase Ventilation (PCV) oil catch can upgrade for the Civic Type R FL5 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. The Honda Civic Type R FL5 features both of these, so we’ve developed kits to cater for each and recommend fitting both for ultimate protection. AIRTEC Motorsport’s solution to developing a PCV catch can kit specifically for the Civic Type R FL5 model utilises the available space at the front of the engine bay to integrate seamlessly. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a Positive Crankcase Ventilation catch can?The PCV valve is a one-way valve that when open allows blow-by gases and vapour produced by the engine to pass from the crank case and back into the inlet manifold, which is what creates the undesirable carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Honda Civic Type R FL5 PCV side Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC part no: ATMSHON10

Read more less

  As part of our growing development program for the Peugeot 208 GTi, the AIRTEC Motorsport gearbox torque mount is now available. Upgrading the original torque mount reduces engine movement and wheel hop during hard acceleration, which allows for faster gear changes and a feeling of improved response.  Finished in silver, the heavy duty mount is machined from billet aluminium and is offered with a fast road/track day purple bush insert. Features: CNC-machined from solid billet aluminium, bead blasted and finished in silver Fast road/track day purple polyurethane bush insert Reduces engine movement and wheel hop on hard acceleration Direct replacement for original cast aluminium and soft rubber torque mount Faster gear changes and feeling of improved response Can be fitted in under 30 minutes with no special tools required Please note: Uprating the torque mount to a stiffer bushing will increase noise and vibration within the cabin. AIRTEC Part No: ATMSP2083

Read more less

  As part of our expanding Peugeot product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the 208 GTI model suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the 208 GTI model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the 208 GTI Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSP2082  

Read more less

 Please note: Fits the THP200 model only.  As part of our expanding Peugeot platform product range, AIRTEC Motorsport is proud to launch our induction kit for the 208 GTi, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow whilst maintaining low intake temperatures, improving response, as well as sound and aesthetics within the engine bay. Having previously designed a number of enclosed induction kits for other performance models, we were keen to develop an extensive intake package for the 208 GTi model to offer significant improvements. The kit features a huge, free-flowing cotton air filter, replacement intake pipe, Pro Hoses silicone connector and laser cut mounting bracket all finished in a high quality and long lasting powder coat black finish. To ensure the new air filter suffers less with heat soak issues from the confines of the engine bay, the laser cut shield complete with AIRTEC logo provides a barrier from the heat of the engine. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. A direct replacement kit that requires no additional drilling or cutting to fit, and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Please note: Now comes with BLACK AIRTEC Motorsport filter – Red for photo purposes only.   Features: Comprehensive induction kit designed specially for 208 GTi platform Large cotton air filter for improved flow and increased performance Laser cut shield helps to ensure lower intake temperatures High quality and long lasting powder coat black finish Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish Includes all fixtures and fittings Registered Design Right number: Application Pending  AIRTEC part no: ATIKP2081

Read more less

Designed to replace the original plastic trim grilles fitted to the outside of the bumper that leave the side radiators open and suspectable to road debris damage. These mesh grilles are made from 2mm laser cut aluminium and are finished in a high-quality black powder coat. They match the design of the centre grille mesh and offer much better protection for the expensive radiators.  They are a direct replacement and require no additional fixings, cutting or modifying to fit.  AIRTEC part no: ATMSYGR30

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium under tray for the Yaris GR Gen 1 and Gen 2 models including automatics. The IssueThe original under tray on Gen 1 cars features no venting at all and is made from a weak fibre material construction which will be prone to failure over time. Gen 2 cars feature a plastic under tray but with a small single vent for the transfer case alone.  ConstructionOur solution to creating a direct replacement under tray began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points and fixings. Made in 2mm aluminium and finished in a high-quality black powder coat, our under tray offers an enhanced level of protection to the underside of the car but more importantly, the design has also been carefully considered to ensure improved cooling and air flow to the vital transmission components.  CoolingWhilst the Gen 1 under trays feature no cooling at all, the Gen 2 under trays feature a basic duct for the transfer case at the rear, as clearly Toyota see this as an area that requires cooling. The AIRTEC Motorsport under tray therefore utilises a much larger scoop for the rear to force more air flow and offer better cooling. It also features a built in gearbox cooling duct, together with a venting section behind it to create air flow to and from the transmission and reduce temperatures. The comprehensive design also features rear ventilation to allow heat to exit the undertray together with side vents to further improve air flow. ConclusionA simple yet effective upgrade that offers improved strength, durability and cooling effectiveness.   Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original Toyota fittings should only be reused if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from Toyota, as failure to do so may cause the under tray to work loose. Features: Direct replacement under tray for Yaris GR Gen 1 and Gen 2 (incl. Automatic) Improved cooling to vital transmission components Uses all original mounting points – no cutting or drilling required Created from 3D scan and CAD software for perfect fitment Made from 2mm aluminium for increased strength Comes in a durable black powder coat finish Uses existing fixtures and fittings   Registered Design Right number: Application Pending AIRTEC part no: ATMSYGR32

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport are proud to launch our Stage 3 oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. Developed in-house at AIRTEC HQ in the UK, this is our biggest oil cooler kit to date offering a huge 117% increase in volume over our Stage 1 oil cooler kit. Spanning across the entire front grille area for maximum air flow, the comprehensive kit also features laser-cut aluminium ducting to force cold air through the cooler. This allows it to fit with our Stage 3 intercooler kit (our Stage 1 oil cooler does not fit with the Stage 3 intercooler) to create the ultimate cooling package. Designed to fit both auto and manual transmissions, the package includes a large AIRTEC Motorsport oil cooler with ducting, bespoke laser-cut and powder-coated brackets, high-quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. TESTED ON TRACKTried and tested on race tracks around Europe with our own 400+bhp Yaris GR, we were able to develop this package after battling with excessive oil temperatures when pushing hard for several fast laps in a row. As a result, our design engineers created a larger volume kit with carefully designed added ducting, which when tested created a huge improvement in sustaining safe oil operating temperatures no matter the climate, or period of driving. Key features: Suitable specifically for the Gen 2 Yaris GR – fits auto and manual transmissions Huge 117% increase in volume over our Stage 1 oil cooler Fits with our Stage 3 intercooler kit  to create the ultimate cooling package Full width oil cooler complete with cold air ducting Tested on track and proven to work Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions   AIRTEC part no: ATMSYGR31

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our intercooler upgrade for the Yaris GR Gen 2, suitable for track or fast road use. Following on from the huge success of our Stage 1 intercooler for the Gen 1 model, we’ve created a package suitable for Gen 2 models with either automatic or manual transmission. The second generation Yaris GR uses a slightly different intercooler kit to the first generation cars in terms of fitting and the use of the water spray bar. Therefore in order to ensure there is no noticeable loss in performance during extended periods of hard driving on road or track, AIRTEC Motorsport has developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance is based upon our stepped-core design to make the most of the limited space available behind the bumper. The core steps from 110mm to 70mm and in doing so offers a huge 64% increase in overall capacity in comparison to the original intercooler. It also offers a 30% increase in frontal area over standard, which allows it to make the very most of the air flow provided. The inlet side of the intercooler retains a 50mm diameter to ensure minimal turbo lag whilst the outlet side increases to 60mm to offer less restriction. Together with our high-flow, moulded one-piece cast end tanks and an internal air diverter to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Despite this improvement, the kit fits neatly behind the original bumper and requires no trimming or cutting, and can be reverted back to standard with no issues. Designed to fit both auto and manual transmissions and includes a new bracket to mount the water spray bar. The comprehensive fitting kit includes all the correct fixtures and fittings, Pro Hoses silicone connectors as well as step-by-step installation instructions. The intercooler is available in a Pro-Series Black finish (with or without the AIRTEC logo) and gloss black Pro Hoses silicone connectors. Dimensions:Width: 610mmHeight: 195mmDepth: 110mm/70mm steppedInlet: 50mmOutlet: 60mm Features:  Suitable specifically for the Gen 2 Yaris GR – fits auto and manual transmissions 64% increase in capacity compared to original intercooler 30% increase in frontal area compared to original intercooler Huge increase in cooling ability Reduced charge temperatures High-flow, moulded one-piece cast end tanks Larger outlet pipe New bracket to mount water spray bar. Powder coated black finish All fittings and fixtures included Comes with detailed fitting guide AIRTEC part no: ATINTYGR3

Read more less

As part of our expanding Honda platform product range, AIRTEC Motorsport is proud to launch our external oil cooler kit for the Ford Fiesta ST150 suitable for track or fast road use. With vast experience developing specific oil cooler packages for road and track cars, our kit features bespoke laser-cut mounting brackets to ensure perfect fitment of our 13-row oil cooler. Also included are high-quality braided lines, fittings, a sandwich plate, all fixtures and detailed instructions.  

Read more less