Engine / Suspension mounts and bushes

PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used our durable Purple 80 Shore A material to target reliability issues of the original part, since the softer OE specified foam quickly deteriorates, even on newer vehicles. OEM Part Number: 2037363 OEM Part Number: BV2Z-5586-B Quantity per car 2 (Price is for amount in pack)        

Read more less

OEM Part Number: 1805815 OEM Part Number: D65128460 Price is for 2x Bushes as required for this car INSTRUCTIONS/DRAWING   

Read more less

These Road Series polyurethane bushes use Purple 80 Shore A material as fit and forget durable alternative to the original Fiesta MK7 models part.  Ford Fiesta Mk7 ST (2013-) Rear Beam To Chassis Bush PFR19-1511 OEM Part Number: 1805815 OEM Part Number: D65128460 Price Ex. VAT: £32.35 Price Inc. VAT: £38.82 Quantity per car 2 (Price is for amount in pack)   Fitting Instructions:1. Remove the original rubber bush from the rear beam, make sure to retain the original mounting bracket.2. Clean any dirt and corrosion from the bore of the arm and file off any sharp edges.3. Push in the polyurethane bush with the larger lip diameter facing the outside of the beam, as shown in Figure 1.4. Apply the supplied grease to the bore of the polyurethane bush and press fit the stainless steel sleeve into the bore of the bush.5. Re-fit the rear beam to the mounting bracket and to the vehicle and tension all hardware to manufacturers recommended torque settings.

Read more less

Lower Torque Mount Large Bush Insert PFF19-2224 Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert. In our Red 65 Shore A material, the movement of the engine mount is reduced by almost half for a given load by the engine. For ultimate engine stability we recommend using our complete engine mount PFF19-2222. Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Standard alignment. Fits the ST models which have a larger 14mm bolt over standard non-ST vehicles. For non-ST models, see TRC1068.This front lower control arm kit has been designed to be an easy repair solution.Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade!Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1046 by far the best choice on the market.These arms utilise the SuperPro bushings and are manufactured from a high strength material.By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.SuperPro offers a lifetime warranty on all Polyurethane products and a 3 year or 36,000 mile warranty on all metal products, end links and ball joints. This warranty covers the cost of replacing the parts in the case of manufacturing defects, material defects and is subject to a Fair Use assessment. ‹› Kit Includes: 2 x Arms 2 x Ball Joints 4 x Polyurethane Bushes 4 x Steel Tubes Shipping Weight: 6.0000kg Stock Details: Immediate Stock On Hand: -6Secondary Stock on Hand: 0 (Normally within 24 hours)2 due on 20 April 2023 Media Files: Fitting Suitable for: Ford Fiesta MK7 Front Wheel Drive (2013 to 2017)

Read more less

OEM Part Number: 1039760 / 1117761 / 1368629 OEM Part Number: 1368618 / 30657362 / 7231272 OEM Part Number: 175544 Size A=71mm B=50mm PRICE IS FOR 1X INSTRUCTIONS/DRAWING   

Read more less

Upgrade to the right hand engine mount used on all petrol engined Fiestas from 2008-2017. It gives significant reduction in engine movement under extreme conditions at the same time offering outstanding vibration isolation performancePlease note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Lower Torque Mount Small Bush Insert PFF19-2221 Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert. In our Red 65 Shore A material, the movement of the engine mount is reduced by almost half for a given load by the engine. For ultimate engine stability we recommend using our complete engine mount PFF19-2221. Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Supplied as a Polyurethane bush and CNC machined bracket combination for dedicated hard track or motorsport use, PFF16-531BLK uses our Black Series 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs. This is THE product for ultimate engine movement control but an increase in NVH should be expected when fitting. For an insert only use PFF16-521BLK. OEM Part Number: 51902659 OEM Part Number: 51820498 Price Ex. VAT: £130.65 Price Inc. VAT: £156.78 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING       

Read more less

Price Ex. VAT: £269.95 Price Inc. VAT: £323.94 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price     Included within this pack are the following parts: PFF19-1531 Front Wishbone Front BushPFF19-1502G Front Arm Rear Bush, Caster AdjustablePFR19-1511 Rear Beam To Chassis BushPFF19-2001 Lower Engine Mount Large Bush 30mm Oval BracketPFF19-2002 Lower Engine Mount Small Bush 30mm Oval Bracket This Handling Pack contains a selection of parts from a complete vehicle listing, click here to see more parts available.

Read more less

Fits manual and DCT transmission models only. This part is designed to limit excessive movement of the upper transmission under load by providing additional stability to the mount from filling excessive voiding in the original mount. This insert is very easy to fit and is a fast way to improve shift feel and performance. This should be considered as a performance upgrade and therefore an increase in noise and vibration is to be expected. OEM Part Number: 1796438 / C1BY-7M121-AA OEM Part Number: 1536197 / 8V51-7M121-AE. Price Ex. VAT: £32.35 Price Inc. VAT: £38.82 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING         

Read more less

EXH030 is designed to replace the internal rubber bush that can so often become unattached from the bracket. OEM Part Number: 13325582 OEM Part Number: 13271296 OEM Part Number: 13264350 / 13255816 Quantity per car 2 (Price is for amount in pack) PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING         

Read more less