Intercoolers

PLEASE NOTE: This is for the intercooler only - without hoses PLEASE NOTE: this intercooler is only available in Pro-Series Black AIRTEC huge front mount intercooler for Mk3 Focus RS. The AIRTEC intercooler is the only off the shelf intercooler that uses a 100mm deep core! We use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties. The AIRTEC intercooler for the MK3 Focus RS is already proving itself to be a huge hit in the RS scene and the must have for remapped cars. With the standard intercooler being pretty up to scratch, Airtec have taken this intercooler to a whole new level. Features of Stage 3. Smooth flow curved end tanks, for that ultimate flow Huge high flow 100mm core Air-Ram Scoop, forces Air directly into core of intercooler Fitting takes 1-2 hours Increased BHP & torque Figure Available in Pro-Series Black or Natural Silver Strongest Intercooler available, backed up by our 3 year warranty. Fabricated in the UK, in house.   Core Thickness 100mm 'this is used on a syvecs powered 800bhp focus rs with an intake temp of 34 degrees'   Height 220mm   Width 896mm   Ambient 16.0 degrees centigrade   Test results Into intercooler in degrees centigrade Run 1 - 155 Run 2 - 157 Run 3 - 160   Out of intercooler in degrees centigrade Run 1 - 18  Run 2 - 18 Run 3 - 19 Intercooler Volume Capacity (The amount of charged air that the intercooler can hold) Standard: 4.4AIRTEC: 7.3-litres

Read more less

TECHNICAL DATA AIRTEC has now added a great addition to it’s growing range of performance intercoolers, in the way of this smart front mount intercooler for the Mini R53 Great addition to any Mini R53 Features 50mm thick track proven bar and plate core, spec’d to AIRTEC design AIRTEC Cast end tanks for improved Airflow and unbeatable strength Comes with silicone and alloy boost pipe connecting hoses – includes stainless clips Fitting takes 3-4 hours 3 year unlimited mileage warranty Only available in Pro-Series Black AIRTEC Logo available for no extra charge Huge surface area whilst still allowing plenty of airflow to top section of the radiator, essential for hotter climate countries. Please note: This kit is a custom install and will require the air-con to be removed & some minor cutting under the bonnet. This intercooler is only available in Pro-Series Black. WILL NOT FIT WITH AIRTEC OIL COOLER KIT Approximate dimensions: Core thickness 50mm Total height 340mm ‘including 40mm pipes’ Width 440mm Pipe diameter used 45mm o.d. Hose colour shown for illustraion purposes only Registered Design Right number: 6030023 AIRTEC part no: ATINTMINI03

Read more less

AIRTEC front mount intercooler for the Mk2 Mazda 3 MPS. Supplied with new, modified crash bar. AIRTEC have now added a great addition to its growing range of performance intercoolers. In the way of this huge front mount intercooler for the Mazda 3 MPS Mk2. A much needed upgrade for your remapped Mazda MPS. Huge 90mm core with flowed cast end tanks High quality silicone hoses finished with stainless jubilee clips. Intercooler mounted to new modified crash bar supplied so no cutting or joining required No cutting to bumper needed Fitting instructions and all required fittings supplied Proven power increase on road and track use Available in Pro-Series black AIRTEC 3 year unlimited mileage warranty Fitting will take approximately 2-3 hours Approximate Dimensions Width – 750mm Height – 210mm Thick – 90mm Registered Design Right number: 6023248 ONLY AVAILABLE IN PRO-SERIES BLACK

Read more less

AIRTEC has released their VW Polo 1.8 TSI Front Mount Intercooler to its growing range of performance intercoolers, reasonably priced but high quality alternative. Registered Design Right number: 6023913 Airtec Part No: ATINTVAG33 TECHNICAL DATA After much research, development and testing at AIRTEC HQ, our intercooler upgrade for the VW Polo Mk6 1.8 TSI has been added to our ever-growing range of products. Built using a high flow core to offer increased cooling efficiency and performance, we take pride ensuring all of our kits are finished to our usual high standard and premium quality. Designed in the UK and offered at a reasonable price. Great addition to any standard or re-mapped Polo’s. AIRTEC front mount intercooler features: 1 x Huge stepped intercooler core 80mm bottom section and 60mm top section, with flowed cast end tanks, this means less welding and a stronger Intercooler Un-beatable value for money Proven power increase for Fast Road & Track builds Available in Pro-Series Black or Natural Silver AIRTEC 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill Fits to standard OEM hoses Approximate sizes: 800mm width 300mm height 80mm/60mm thick Intercooler Volume Capacity (The amount of charged air that the intercooler can hold)AIRTEC: 5.75 litres Registered Design Right number: 6023913

Read more less

AVAILABLE NOW FOR PRE-ORDER! Estimated delivery date Mid – End Jan 2020. AIRTEC Motorsport HUGE stage 2 front mount intercooler for PUMA MK2 ST The stage 2 intercooler utilises the large space available to fit neatly behind the front bumper. Suitable for modified PUMA MK2 ST that require the highest level of cooling efficiency and performance for track or fast road use. Introductory price – £495!

Read more less

TECHNICAL DATA Silicon hose and boost pipe kit for Airtec front mount intercooler – Fabia VRS, Ibiza Mk4 and Polo 1.9 PD130 Diesel. We take a huge amount of pride in making sure our kits are finished to an Extremely high standard. This kit is designed to fit the AIRTEC front mount intercooler conversion – Fabia VRS, Ibiza Mk4 and Polo 1.9 PD130 Diesel Can be adapted to suit a number of VAG applications Un-Beatable value for money Hoses available in a variety of colours, Red, black and blue usually kept in stock. Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue Please allow 2-4 weeks for delivery.  part no: ATINTVAG31

Read more less

TECHNICAL DATA Currently out of stock, next batch due to be finished in 3-4 weeks. Finished in Pro-Series Satin Black  AIRTEC has released their Astra GSI/SRI MK4 Intercooler with a great price, reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercooler kits, we take a huge amount of pride in making sure our kits are finished to an extremely high standard. Huge 60mm core. Race spec bar and plate core. High flowing, cast end tanks Intercooler and Pipework finished in Pro-Series Black Fitting kit included. Pro Hoses silicone hoses. Recomended for cars running Stage 3/4 For cars running up to 350 bhp Pipework spec to 350bhp Low lag (pipework keeps turbo spooled up) Works perfectly with standard cars too New high flow 60mm core and smooth flow end tanks, which in turn has increased power, torque & also lowered ACT Temps. Approximate dimensions: 900mm width 280mm height 60mm thick Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue Please allow 2-4 weeks for delivery.

Read more less

TECHNICAL DATA AIRTEC Motorsport front mount intercooler for Audi A4 B7 2.0 TFSI (2005 – 2008) A great upgrade for the standard or modified Audi A4 B7, developed in house at AIRTEC HQ, perfect for fast road and track use. AIRTEC take a huge amount of pride in making sure out kits are finished to an extremely high standard and have a real eye for attention to detail. Features: AIRTEC huge 60mm core intercooler with flowed cast end tanks Pro Hoses high quality 4/5ply silicone hoses Supplied with new, modified crash bar Fitting instructions and all relevant fixings supplied Available in Pro-Series Black or Natural silver AIRTEC 3 year unlimited mileage warranty Fitting will take 2-4 hours depending on mechanical skill Please note: some minor trimming on the back of the fog lamp grills may be required Airtec intercooler sizes Height 340mm Width 680mm Thickness 60mm Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue Please allow 2-4 weeks for delivery.

Read more less

TECHNICAL DATA AIRTEC are proud to introduce the front mount intercooler upgrade for the Audi A4 (B8) 2.0-litre TFSI petrol. Designed to fit all 2.0-litre TFSI petrol models from 2009 to 2016, this free-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Featuring an 80mm core design together with high-flow, cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper and requires no trimming or cutting. The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 1-2 hours to complete. The intercooler is available in a choice of either Pro-Series Black finish only with black hoses, and a choice of with or without the AIRTEC logo. Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black finish AIRTEC logo available at no extra charge Unbeatable value for money! AIRTEC part no: ATINTVAG4

Read more less

TECHNICAL DATA AIRTEC are proud to introduce the front mount intercooler upgrade for the Audi A6 3.0 TDi Bi-Turbo This freer flowing front mount intercooler set up is a direct replacement for the much smaller and more restrictive Audi set up. Featuring an 80mm core design together with high-flow cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper and requires no trimming or cutting. The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 1-2 hours to complete. The intercooler is available in  Pro-Series Black finish with or without the AIRTEC logo. Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black finish. AIRTEC logo available at no extra charge Unbeatable value for money!   AIRTEC part no: ATINTVAG29

Read more less

TECHNICAL DATA AIRTEC are proud to introduce the front mount intercooler upgrade for the Audi RS3 (8P)Designed to fit all models, this free-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up.Featuring a huge 120mm core design together with high-flow, cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper and can be used with the original hoses.As with all AIRTEC products, the intercooler was tested back-to-back on the dyno aginist the OEM item. This showed a huge reduction in air charge temperatures over standard, as seen below:Rolling Road test results – Carried out at AmD Tuning on 11/04/2017Standard Intercooler:Run 1 – Into intercooler: 117 degrees – Out of intercooler: 69 degreesRun 2 – Into intercooler: 117 degrees – Out of intercooler: 68 degreesRun 3 – Into intercooler: 119 degrees – Out of intercooler: 78 degrees AIRTEC Intercooler:Run 1 – Into intercooler: 116 degrees – Out of intercooler: 36 degreesRun 2 – Into intercooler: 117 degrees – Out of intercooler: 36 degreesRun 3 – Into intercooler: 118 degrees – Out of intercooler: 37 degrees The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 3-4 hours to complete.The intercooler is available in Pro-Series Black finish, with or without the AIRTEC logo. Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black finish AIRTEC logo available at no extra charge Unbeatable value for money! Approximate Dimensions:Standard:Width: 535mmHeight 160mmDepth: 80mmAIRTEC:Width: 540mmHeight: 215mmDepth: 120mmIntercooler Volume Capacity (The amount of charged air that the intercooler can hold)Standard: 3.9-litresAIRTEC: 6.1-litres

Read more less

TECHNICAL DATA AIRTEC have now released our latest intercooler for the AUDI RS3 8V. We take a huge amount of pride in making sure our kits are finished to an extremely high standard. AIRTEC Front mount Intercooler kit includes these parts & features 1 x huge 100mm core intercooler Powder coated standard intercooler support brackets No cutting to bumper Fitting instructions and all required fixings Un-Beatable value for money Proven power increases for fast road & track Available in Pro-Series Black AIRTEC 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Options: Option 1: Without optional crash bar – Requires existing crash bar to be cut and welded. Can be supplied with laser-cut plate and template. Option 2: With crash bar – New crash bar comes powder coated and pre-cut ready to fit – (Please add £354) Capacity intercooler – 7.97 Litres PLEASE NOTE: This intercooler will NOT fit cars with adaptive cruise control. Silver for illustration purposes only. Registered Design Right number: 6022631 Approximate dimensions: W100 mm/L650mm/H250 mm AIRTEC part number: ATINTVAG18

Read more less