Performance - Audi A3 (8V)

Eibach Pro-Kit Lowering Spring Kit Mk7 Golf GTI/GTD, Mk3 Leon, A3 8V – E10-15-021-02-22 Registration Type: with General Certification (ABE) Part Number: E10-15-021-02-22 Axle: Independent wheel suspension Vehicle Model Lowering or lifting (+..) front (approx.) Lowering or lifting (+..) rear  (approx.) A3 (8V1, 8VK) 1.8 TFSI, 2.0 TFSI, 1.6 TDI, 2.0 TDI 30 mm 30 mm LEON (5F1) 1.8 TSI, 2.0 TSI, 1.6 TDI, 2.0 TDI 35 mm 30 mm LEON (5F1) 2.0 Cupra, 2.0 Cupra R 15 mm 10 mm LEON Kasten/Schrägheck (5F1) 1.8 TSI, 1.6 TDI, 2.0 TDI 35 mm 30 mm LEON Kasten/Schrägheck (5F1) 2.0 Cupra, 2.0 Cupra R 15 mm 10 mm LEON SC (5F5) 1.8 TSI, 1.6 TDI, 2.0 TDI 35 mm 30 mm LEON SC (5F5) 2.0 Cupra 15 mm 10 mm GOLF VII (5G1, BQ1, BE1, BE2) 1.6 TDI, 2.0 TDI 35 mm 30 mm GOLF VII (5G1, BQ1, BE1, BE2) 1.8 TSI, 2.0 TSI, 2.0 GTI, 2.0 GTI Clubsport, 2.0 GTI Clubsport S, 2.0 GTD 25-30 mm 15-20 mm Eibach PRO-KIT Performance Springs World’s leading Performance Suspension Spring System Engineered and tested to work perfectly with stock dampers First step towards a complete sport suspension system Lower center of gravity Lowering = Traction + Attraction Progressive spring design Performance handling The Eibach Pro-Kit is the perfect answer for most popular road vehicles. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance. Pro-Kit lowers your car?s centre of gravity, reducing squat during acceleration, body roll in corners and excessive nosedive under braking. When combined with Plus-1 or Plus-2 wheels and tyres, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender well clearance, making your car look just as hot as it performs. Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level. Please note: All spring lowering amounts are measured off the Standard chassis, this would not include models such as sports, Sline and Msports for example which may come lower from factory, you will need to take that measurement off of our measurement to give you an approximate drop.   The Eibach Pro-Kit is the perfect answer for most popular road vehicles. It?s our legendary spring system that dramatically improves both a vehicle?s performance and appearance. Pro-Kit lowers your car?s centre of gravity, reducing squat during acceleration, body roll in corners and excessive nosedive under braking. When combined with Plus-1 or Plus-2 wheels and tyres, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender well clearance, making your car look just as hot as it performs. Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

Read more less

Revo Engine Mounts More power results in more movement during aggressive acceleration. The stock engine mounts, designed to favour comfort over performance, fail to manage axle hop and torque effectively requiring you to ease off in order to gain traction. Designed to significantly reduce this engine movement, Revo engine mounts use Dual Durometer technology to minimise noise, vibration and harshness levels (NVH) while drastically improving traction and acceleration. The engine, transmission and torque mounts have been CAD designed to offer OE quality fitment with the performance benefits and quality of a Revo product. Key Features Dramatically reduce engine movement Improved acceleration and torque Dual Durometer Technology Comes with removal tool for torque mount Engine & Transmission Mount The primary design goal of the engine and transmission mounts was to provide a management system for engine movement during vehicle operation with increased power/torque, in order to retain vehicle acceleration and tyre contact during aggressive driving. The aforementioned solution must also continue to dissipate the NVH naturally created by the drivetrain. To accomplish this, the bushing design of past Revo engine mounts was retained in the MQB engine and transmission mounts, allowing Revo engineers to focus their efforts on bushing stiffness/type to accomplish the task. Torque Mount Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting the mount does not require the sub-frame to be removed, reducing installation time and the need for axle re-alignment. A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. Materials, Manufacturing & Fitment Effective design and fitment plays a principal role in managing engine movement to ensure optimal acceleration and tyre contact with the road while dissipating NVH experienced from the drivetrain. Each component has been designed using CAD technology to ensure precision fitment and is supplied with class 12.9 hardware to replace the standard fixings. To ensure optimum strength and durability, brackets and housings are CNC machined from 6061-billet aluminium and finished with an anodised coating to protect from heat and corrosion. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructionsDownload the Revo MQB Engine Mount Instructions HERE Fitting instructionsDownload the Revo MQB Torque Mount Instructions HERE Fitting instructionsDownload the Revo MQB Transmission Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull kit includes engine mount, transmission mount , torque mount and torque mount installation tool Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards

Read more less

UNIVERSAL EXHAUST MOUNT X1 To Fit Golf R EXH023 OEM Part Number: 712770470 OEM Part Number: 1H0253147B OEM Part Number: 255047, 1756516020, 1H0253147C, 20650D0101   FITS: AUDI A1/S1 8X AUDI A3/S3 8L AUDI A3/S3 8V AUDI TT MK1 8N SEAT IBIZA MK2 SEAT IBIZA MK3 6L SEAT LEON MK1 SKODA FABIA MK1 SKODA FABIA MK2 1Z SKODA OCTAVIA MK1 SKODA OCTAVIA MK2 1Z VW POLO MK4 9N VW POLO MK5 6R/6C PO T-ROC VW UP! VW GOLF MK4 VW GOLF MK7 TOYOTA YARIS GR4

Read more less

MQB (Multi-Link) Spring and Damper Kit When it comes to sport dampers the compromise between performance and comfort has been a persistent dilemma for keen drivers and enthusiasts. With the RacingLine Performance Sport Damper kit, which consists of two front and two rear shocks, this dilemma becomes a thing of the past for Golf 7 Platform cars at an affordable price. Fitting the RacingLine Performance Sport Damper kit ensures superior road-holding and a positive transformation in handling characteristics without compromising comfort. Our Sport Dampers are designed to maximise comfort and performance on all road conditions, and driving styles; guaranteeing greater stability, control and therefore driving pleasure. This kit has been designed to work in harmony with RacingLine Performance Sport Springs. In tandem, these upgrades provide the ultimate in handling and comfort. These two upgrades really do make the perfect combination for your car. This kit will fit the following vehicles with a 55mm Front Strut and Multi-Link Rear Suspension only:* Volkswagen Golf Mk7* Audi A3 8V* SEAT Leon Mk3* Skoda Octavia Mk3 Notes: – Not suitable for Audi S3– Not suitable for cars with Mag-Ride/DCC Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Revo Torque MountMore power results in more movement during aggressive acceleration. The stock torque mount is designed to offer comfort over performance and does not manage engine movement effectively. Designed to significantly reduce the loss of torque and drastically improve traction and acceleration, the Revo Torque mount has little to no effect on vibration and harshness levels (NVH) felt in the cabin. Key Features Dramatically reduce drivetrain movement Improved acceleration and torque Simple and easy to install with tool included Doesn't require sub-frame removal for installation Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting Kit A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. This allows the OEM part to be removed and the Revo part to be installed without removing the sub-frame, reducing installation time and the need for axle re-alignment. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructions Download the Revo MQB Torque Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull Mount Kit available, including Engine, Transmission and Torque mount Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Important Notes: 22mm - 2 Point Adjustable Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 2 point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort. WARRANTY: Backed by a 3 year warranty

Read more less

Racingline Adjustable Rear Droplinks MQB/MQB Evo – VWR520000 Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements. Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier. Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. Vehicle FItment – VW Golf Mk8 2020+– VW Golf Mk7 & Mk77.5 2013-2020– VW Passat B8 2015+– VW Arteon 2017+– VW T-Roc 2017+– VW Tiguan II 2016+– Audi S3 8Y 2020+– Audi A3 8Y 2020+– Audi S3 8V 2013-2020– Audi A3 8V 2013-2020– Audi RS3 2.5 TSI 8V 2017-2020– Audi TT 3 8S 2014+– Audi TTRS 8S 2017+– Audi SQ2 2018+– Audi RSQ3 F3 2019+– Audi Q3 2019+– Audi Q2 2017+– Cupra Leon IV FW 2020+– SEAT Leon III 5F 2015-2020– Cupra Ateca 2018+– Cupra Formentor 2020+– SEAT Tarraco 2018+– Skoda Octavia IV NX 2020+– Skoda Octavia III 5E 2014-2020– Skoda Superb III 3V 2015+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR520000

Read more less

Racingline MQB Subframe Alignment Kit The RacingLine Alignment Bolt Collar kit is a simple ‘why not’ upgrade to eliminate the challenges caused by large tolerances in the factory subframe mounts, both front and rear. The OEM subframe design uses really oversized bolt holes – giving a wide range of adjustments to shuffle the whole subframe assembly back and forth, side to side. Whilst that may be ideal for dealers & repairers to lazily mask other misalignment in the chassis, it means that there are also huge opportunities for inaccuracy every time your subframes are refitted, not to mention the risk of the car’s alignment creeping out of tolerance with hard driving over time. Our precision-engineered, push-in Bolt Collars centralise the subframes by cutting out the huge hole tolerances, so perfectly centring the bolt locations every time you refit. The result? With correct alignment, you’ll keep precise steering, sharper handling and braking responses every time. By ensuring complete accuracy every time you refit your subframes, you’ll save time and cost by ensuring consistent, hassle-free alignment each time, every time.  With no need for alignments after refitting subframes in future, this really affordable upgrade will likely pay for itself many times over.No additional NVH transfer into the car and no more creaking mounts. Full kit of 16x Bolt Collars for front and rear subframes High quality T6061 billet aluminium construction CNC construction, anodised gloss black to last Precision machining means tighter alignment specs Simple, quick push-in fitment into OEM subframes No modification to subframe or car body is required, so fitment is completely reversible. Confirmed Applications VW Golf 7 2012+ 5G VW Golf 7 GTI 2013+ 5G VW Golf 7 R 2013+ 5G VW Golf 7 GTI ClubSport 2016+ 5 VW Passat 2.0 TSI B8 2015+ 3G Audi A3 2012+ 8V Audi S3 2013+ 8V Audi TT III 2014+ 8S Audi TT 2.0 TSI III 2014+ 8S Audi TTS III 2015+ 8S SEAT Leon III 2012+ 5F SEAT Leon Cupra III 2014+ 5F Skoda Octavia III 2013+ 5E Skoda Octavia vRS III 2014+ 5E Skoda Superb 1.8 / 2.0 TSI 2015+ B8 3V Fitting Installation is straightforward and can be performed in approximately one hour. We recommend replacing the original subframe bolts with new ones – as stretch bolts they are intended for one-time use only. It’s critical to perform a full wheel/geometry alignment by a professional after fitment. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR150000

Read more less

The ECS Heavy Duty Rear Shock Mount offers significant performance to your vehicle's handling and long term durability as compared to stock shock mounts. With the increased durometer over the squishy, foam, OEM 50A durometer shock mounts, the ECS void-free 75A durometer rubber shock mounts will better resist deflection and premature wear that commonly plague the OE mounts without sacrificing ride comfort. This is a must have if you are installing sport springs, coilovers or when replacing rear shocks. OEM shock mounts are known to wear within 100k miles, typically associated with annoying pops and rattles as the vehicle goes over bumps and uneven terrain. The ECS Heavy Duty Rear Shock Mounts are made to last, with their higher durometer over stock and precision to OE tolerances.   PART DESIGN 75A durometer solid rubber bushing assembled with precisely controlled preload for superior durability and resistance to axial forces which cause the OE units to fail OE style cast aluminum housing with a black E-Coat to ensure all surfaces are covered Quiet, long-lasting, dependable operation   The ECS Heavy Duty Rubber Rear Shock Mount Kit includes the following: ECS Heavy Duty Rubber Rear Shock Mounts - QTY 2 Shock Mount Dust Caps - QTY 2 Lower Shock Mounting Bolts - QTY 2 This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Arteon 4Motion 2.0T Evo4 Volkswagen Arteon 4Motion 2.0T Gen3 Volkswagen Arteon FWD 2.0T Evo4 Volkswagen Arteon FWD 2.0T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII All 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII GLI Facelift 2.0T Gen3

Read more less

Are you installing new suspension on your vehicle? If so, don’t let them get the best of you, pick up this new ECS Complete Cup Kit/Coilover Install Kit and make the job easier than ever. This new kit includes two upper strut bearings, two Heavy Duty ECS upper front strut mounts, two ECS HD upper rear shock mounts and all the mounting hardware needed for installation. Getting this means no need to use a spring compressor to retrieve your old hardware to install your new suspension. On top of that, it also leaves your old suspension fully assembled so that it may be quickly swapped back onto the vehicle if needed, that way, you can take your coilovers with you when it comes time to sell your vehicle.   Kit includes : [FRONT] (2) ECS Heavy Duty Front Strut Mounts (2) Front Upper Strut Bearings (2) Front Upper Strut Nuts (6) Front Upper Strut mount Bolts (2) Front Axle Bolts (2) Front Strut Pinch Bolts (2) Front Strut Pinch Bolt Nuts (2) Front Sway Bar End Link Nuts (6) Ball Joint Nuts [REAR] (2) ECS Heavy Duty Rear Shock Mounts (2) Rear Shock Upper Mounting Nuts (2) Rear Shock Upper Mount Dust Caps (4) Rear Shock Upper Mounting Bolts (2) Rear Shock Lower Mounting Bolts (2) Rear Shock Lower Mounting Nuts (2) Rear Sway Bar End Link Mounting Bolts (2) Rear Sway Bar End Link Mounting Nuts This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII All 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3

Read more less

When using the car on track it is impossible to setup proper rear camber with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment.  Now it is possibile to easily setup and maintain desired camber on your track car. For that reason we have come up with inserts for wheel bearing housing and rear lower wishbone that the spring sits on. Our inserts use metal to metal uniball just like used in Porsche RS line (GT2RS, GT3RS). Tested intensively on our Track TTRS. Product functionalities:– no rubber to bend, you will not loose the geometry while cornering that was set when doing aliment Features:– CNC machined form 7075 aluminium and anodized in black and silver– M18 and M16 uniball– metal bushings galvanized in black What is included:– four inserts (this is a kit for one car) Used in  cars (type numbers in brackets): 2013 +  Audi A3/S3/RS3 (8V & 8VFL MQB) 2013 +  Audi A3 (8V & 8VFL MQB) 2015 +  Audi TT/ TTS /TTRS (8S MQB) 2013 + Volkswagen Golf/GTI (Mk7 MQB + Mk8) 2013 + Volkswagen Golf/GTI/R (MkVII MQB) 2012 + Seat Leon (5F MQB) 2017 + Audi Q2 (quattro) Replaces:– 1K0505553A / 1K0 505 553A – uprights bush– 5Q0505553 / 5Q0 505 553 – inner bush Note: Installation of this rear insert kit will introduce some additional some NVH (noise, vibration, and harshness) transfer into the cabin.

Read more less

NEUSPEED Anti-Roll Bars give you the ultimate in handling, precision engineered with smooth mandrel bends, aerospace-quality steel and graphite impregnated urethane bushings. NEUSPEED Anti-Roll Bars improve performance by reducing body roll during cornering, increased steering response and grip, yet retain a comfortable ride during straight-line cruising. NEUSPEED 25mm (1") Rear Anti-Roll Bar is recommended to use with the factory original front bar or the NEUSPEED 25mm (1") Front Anti-Roll Bar. Great for street use and will give a more stable and netural handling vehicle around turns. With our 40+ years experience in suspension tuning for street and track we offer the correct size bars for the best balance and ultimate handling. NEUSPEED Anti-Roll Bars give you the ultimate in handling, precision engineered with smooth mandrel bends, aerospace-quality steel and graphite impregnated urethane bushings. NEUSPEED Anti-Roll Bars improve performance by reducing body roll during cornering, increased steering response and grip, yet retain a comfortable ride during straight-line cruising. Designed and Tested at NEUSPEED's R&D facility in Camarillo, California. NEUSPEED Anti-Roll Bars are tuned to deliver high performance handling on roads, autocrossing and/or race tracks. With our 40+ years experience in suspension tuning for street and track we offer the correct size bars for the best balance and ultimate handling. Notes:Fits: 2014-up Audi A3/S3(8V) Quattro and 2015-up VW Golf R. Sway Bar Rate:- Forward Hole: 128% increase over stock Golf R 21.7mm bar.- Rearward Hole: 102% increase over stock Golf R 21.7mm bar. Designed and Engineered Camarillo, California.

Read more less