Performance - Audi S6/S7 4.0 TFSI 2012>

The Audi S6 and S7 are impressive cars straight out of the box, yet when combined with Revo’s market leading software they come into a world of their own. In our search to extract more power from the mighty 4.0 TFSI engine, we quickly found that the stock air-box and filter became a major limitation for the car. During research and development, our in-house engineers worked with both the S7 and RS7 to analyse and compare the differences in each intake system, and how efficiently they performed. The direct replacement kit, which includes an RS7 air-box, Revo ProPanel filter and stepped silicone hoses was installed and tested on our in-house S7 development vehicle; the results were staggering. On our Dynopak hub dyno we saw dramatically improved power and torque throughout the rev-range, with consistent gains of +21WHP and +24NM with our Stage 2 software installed. BENEFITS Increases power and torque +21 WHP and + 24 NM gain OEM+ Look Custom designed Silicone hoses Revo ProPanel filter AIRBOX The S and RS air-box may look very similar at a glance, however after analysis and testing of both air-boxes, it was quite clear that the RS air-box had a tremendous amount of potential with a few essential improvements. The two inlet pipes have a larger 100mm diameter, allowing more air to flow with much less restriction compared to the 85mm stock air-box inlets. Revo software really allows the car to utilise this increase in airflow, all without compromising on the OEM look of the engine bay. SILICONE HOSES To compensate for the larger outlets on the RS7 air-box, we designed and developed two larger silicone hoses to join the air intake system to the engine. Revo’s flush fit designed silicone hoses connect to the air-box without any internal restriction, minimising turbulence and allowing a smoother flow of air to maximise performance. REVO PROPANEL FILTER The standard paper filter found in most vehicles performs well under normal conditions, however with increased power it becomes a major choking point in the system. Revo ProPanel filters work by trapping dirt particles within each of the oiled foam layers while allowing air to negotiate its way through, reducing restriction and offering much longer service intervals. We tested the filter at a leading motor testing centre ‘Mira’ on an industry recognised dust load test. On a full dust load test the foam filter was found to still be 99.3% efficient, filtering down to 5 micron while offering the least amount of restriction over similar products. FULL KIT The Revo 4.0 TFSi intake kit comes complete with RS7 air-box, Revo ProPanel filter, silicone hoses and fitting brackets. The kit offers an OEM+ look and fit, with no required modifications to the vehicle, finished off with an aluminium tag.   TESTING Revo 4.0 TFSI intake kit vs Stock     INTAKE PERFORMANCE FIGURES Engine Software Power Torque 4.0 TFSI Stage 2 + 21 BHP + 24 NM   *Maximum power and torque increases shown in testing when using Revo 4.0 TFSI intake system compared to stock intake on Audi S7   TECHNICAL DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the  Revo 4.0 TFSI Air Intake System Fitting Instructions     FITTING      Manufacturer Model Engine Year Audi S6 4.0 TFSI 2012 > Audi S7 4.0 TFSI 2012 >

Read more less

STAGE 1 AUDI, S7, 4.0 TFSI - TWIN TURBO Power Torque Stock 420ps  406lbft  REVO Stage 1 Software from 520ps to 562ps  from 536lbft to 568lbft PERFORMANCE SOFTWARE All Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev-range while maintaining the extensive factory safety mechanisms. Although Revo offers some of the most substantial performance increases on the market, peak figures form part of a much bigger picture and are never the sole focus during development. Revo Software offers a perfect balance of performance, economy, longevity and safety. Revo Stage 1 Performance software has been specifically developed to attain the best possible performance from the 4.0 TFSI engine found in Audi's performance executive vehicles. The 4.0TFSI is an extremely capable engine that can offer so much more with Revo stage 1 software installed, you can expect to see up to 100 PS and over 130 NM of torque over stock taking you very close to RS power. Performance testing consistently achieved 0-60 times within 0.2 seconds of a stock RS 4.0 TFSI vehicle.    SOFTWARE FEATURES LEFT FOOT BRAKING Left foot braking has been enabled on this vehicle. SPEED LIMIT UNLOCKED the top speed limit for this vehicle has been unlocked. SERIAL PORT SWITCH (SPS) Switchable Mapping for 2 Performance modes and anti-theft   DEVELOPMENT Testing facilities at their UK Headquarters and US Development Facility, as well as a track office at Bruntingthorpe Proving Ground and Virginia Point Raceway, Revo are able to test their products extensively on and off track. Testing products in this way are paramount to ensuring that along with more useable power and torque comes refined drive-ability, something often overlooked. ON ROAD TESTING Testing on a dyno will only ever tell part of the story. Revo believes in data-logging on the road and racetrack as well as testing in controlled dyno conditions, to give you a clearer picture of the performance you can expect. This plays an important role in the Revo development process, ensuring the highest quality products that perform where and when it matters most. DEVELOPMENT VEHICLES Access to vehicles is imperative to development and testing. Revo runs one of the most extensive fleets in the industry, and have access to hundreds of other beta vehicles via a global Authorised Dealer Network. These vehicles not only demonstrates what is capable using Revo products, which cover thousands of miles in a multitude of climates, but also ensures that vehicles perform in any scenario, from a trip to the local shops to an epic adventure in the Alps. GRAPHS   * All graph data produced using a Audi S7 4.0 TFSI 420PS with Standard Shell vpower Pump Fuel Technical Data TECH DATA 3 Performance Modes Left foot braking enabled Speed limit removed SPS SETTINGS Setting #1 on your SPS sets your vehicle to stock* Setting #2 on your SPS sets your vehicle to Revo Performance mode A (Tuned for lower octane pump fuel / poor operating conditions - 95ron) Setting #3 on your SPS sets your vehicle to Revo Performance mode B (Tuned for high-octane pump fuel / good operating conditions - 97ron) Setting #4 on your SPS sets your vehicle to Revo Performance mode C (Tuned for high-octane pump fuel / ideal operating conditions - 98+ron) *NOTE: Stock mode is not completely stock, it will run similar performance levels to a stock vehicle. Your Revo dealer has a complete factory stock file, if any main dealer warranty or servicing work is required, we recommend returning your vehicle to complete stock.   THE REVO DIFFERENCE OBD PORT INSTALL Revo Software can be installed quickly and safely via the OBD Port without the need to open the ECU. MONEY BACK GUARANTEE We know you'll love how Revo Software transforms your car. If you don't, we'll give you your money back. FUEL ECONOMY Dependant on your driving style, this software will deliver like for like fuel economy in 'normal' driving conditions.   *De-cat hardware & software is intended for track / off-road use only.

Read more less

STAGE 1 AUDI, S6, 4.0 TFSI - TWIN TURBO Power Torque Stock 420ps  406lbft  REVO Stage 1 Software from 520ps to 562ps  from 536lbft to 568lbft PERFORMANCE SOFTWARE All Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev-range while maintaining the extensive factory safety mechanisms. Although Revo offers some of the most substantial performance increases on the market, peak figures form part of a much bigger picture and are never the sole focus during development. Revo Software offers a perfect balance of performance, economy, longevity and safety. Revo Stage 1 Performance software has been specifically developed to attain the best possible performance from the 4.0 TFSI engine found in Audi's performance executive vehicles. The 4.0TFSI is an extremely capable engine that can offer so much more with Revo stage 1 software installed, you can expect to see up to 100 PS and over 130 NM of torque over stock taking you very close to RS power. Performance testing consistently achieved 0-60 times within 0.2 seconds of a stock RS 4.0 TFSI vehicle.    SOFTWARE FEATURES LEFT FOOT BRAKING Left foot braking has been enabled on this vehicle. SPEED LIMIT UNLOCKED the top speed limit for this vehicle has been unlocked. SERIAL PORT SWITCH (SPS) Switchable Mapping for 2 Performance modes and anti-theft   DEVELOPMENT Testing facilities at their UK Headquarters and US Development Facility, as well as a track office at Bruntingthorpe Proving Ground and Virginia Point Raceway, Revo are able to test their products extensively on and off track. Testing products in this way are paramount to ensuring that along with more useable power and torque comes refined drive-ability, something often overlooked. ON ROAD TESTING Testing on a dyno will only ever tell part of the story. Revo believes in data-logging on the road and racetrack as well as testing in controlled dyno conditions, to give you a clearer picture of the performance you can expect. This plays an important role in the Revo development process, ensuring the highest quality products that perform where and when it matters most. DEVELOPMENT VEHICLES Access to vehicles is imperative to development and testing. Revo runs one of the most extensive fleets in the industry, and have access to hundreds of other beta vehicles via a global Authorised Dealer Network. These vehicles not only demonstrates what is capable using Revo products, which cover thousands of miles in a multitude of climates, but also ensures that vehicles perform in any scenario, from a trip to the local shops to an epic adventure in the Alps. GRAPHS   * All graph data produced using a Audi S7 4.0 TFSI 420PS with Standard Shell vpower Pump Fuel Technical Data TECH DATA 3 Performance Modes Left foot braking enabled Speed limit removed SPS SETTINGS Setting #1 on your SPS sets your vehicle to stock* Setting #2 on your SPS sets your vehicle to Revo Performance mode A (Tuned for lower octane pump fuel / poor operating conditions - 95ron) Setting #3 on your SPS sets your vehicle to Revo Performance mode B (Tuned for high-octane pump fuel / good operating conditions - 97ron) Setting #4 on your SPS sets your vehicle to Revo Performance mode C (Tuned for high-octane pump fuel / ideal operating conditions - 98+ron) *NOTE: Stock mode is not completely stock, it will run similar performance levels to a stock vehicle. Your Revo dealer has a complete factory stock file, if any main dealer warranty or servicing work is required, we recommend returning your vehicle to complete stock.   THE REVO DIFFERENCE OBD PORT INSTALL Revo Software can be installed quickly and safely via the OBD Port without the need to open the ECU. MONEY BACK GUARANTEE We know you'll love how Revo Software transforms your car. If you don't, we'll give you your money back. FUEL ECONOMY Dependant on your driving style, this software will deliver like for like fuel economy in 'normal' driving conditions.   *De-cat hardware & software is intended for track / off-road use only.

Read more less

The Audi RS6 and RS7 are without doubt quick in their purest form, add Revo Stage 1 and 2 software however, they quickly become supercar killers. Giving the cars an even further boost in their already staggering power figures, we turned our attention to developing an upgrade for the air intake system. Testing found that the RS air-box had a tremendous amount of potential, with only a few key areas that caused restriction.The new direct replacement kit includes a Revo foam filter, stepped silicone hoses and an aluminium tag. We installed the kit on an RS7 development vehicle, on our Dynopak hub dyno we saw improved power and torque throughout the rev-range, with consistent gains of +4WHP and +4NM over the stock filter and hoses when used with Revo Stage 1 ECU performance software.  BENEFITS Increased airflow +4 WHP and + 4 NM gain Retains factory airbox Custom designed Silicone Hoses Revo ProPanel filter AIR FILTER The standard paper filter found in most vehicles performs well under normal conditions, however, with increased power it becomes a major choking point in the system. Revo ProPanel filters work by trapping dirt particles within each of the oiled foam layers while allowing air to negotiate its way through, reducing restriction and offering much longer service intervals. We tested the filter at a leading motor testing centre ‘Mira’ on an industry recognised dust load test. On a full dust load test, the foam filter was found to still be 99.3% efficient, filtering down to 5 microns while offering the least amount of restriction over similar products. SILICONE HOSES The plastic hoses on the stock system design with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbos. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement.     INTAKE PERFORMANCE FIGURES Engine Software Power Torque 4.0 TFSI Stage 1 + 4 BHP + 4 NM   *Maximum power and torque increases are shown in testing when using Revo 4.0 TFSI intake system compared to the stock intake on Audi RS7   TECHNICAL DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the  RA731M200200 Revo 4.0 TFSI Air Intake System Fitting Instructions     FITTING      Manufacturer Model Engine Year Audi RS6 4.0 TFSI 2012 > Audi RS7 4.0 TFSI 2012 >

Read more less