Performance - Golf MK7

seatTurbo Muffler Delete The Revo Turbo Muffler Delete has been designed and manufactured to directly replace the stock muffler found in vehicles with the 1.8T and 2.0T TSI engines with an IHI turbo. The Revo Turbo Muffler Delete offers a high-quality single piece replacement for the OEM part which allows for smoother uninterrupted air flow, increasing throttle response and providing improved turbo acoustics. Key Features CNC machined Single piece design Anodised black Improved boost response Increased turbo sound OEM Part The factory IHI turbocharger on your engine is equipped with a turbo muffler positioned at the compressor outlet. This is designed to reduce noise from the turbocharger by using two holes cut into the side walls that create chambers. These chambers cause turbulence in the air exiting the turbo which produces back pressure that negatively affects performance and response. Design Features Designed by Revo, the turbo muffler delete is CNC machined from a single piece of billet aluminium and anodised black for strength and corrosion resistance with a laser-etched Revo logo. Its single piece design allows air a more direct path when exiting the turbo, smoothing flow to offer enhanced throttle and boost response. This part comes complete with a high-temperature gasket to ensure a secure seal when installed. Vehicle Applications Audi S1 2.0 TFSI 14 - Audi A3 / S3 (8V) 1.8 / 2.0 TFSI 12 - Audi A4 (B8/8.5) 2.0 TFSI 11 - Audi A5 (B8/8.5) 2.0 TFSI 12 - Audi Q5 1.8 / 2.0 TFSI 11 - Audi TT / TTS (MK3) 2.0 TFSI 14 - Seat Ibiza Cupra 1.8 TSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 15 - Skoda Octavia (Mk3) 1.8 / 2.0 TSI 13 - Skoda Superb 2.0 TSI 15 - VW Golf (Mk7) 1.8 / 2.0 TSI 12 - VW Polo GTI (Mk6) 1.8 TSI 15 -

Read more less

Revo Engine Mounts More power results in more movement during aggressive acceleration. The stock engine mounts, designed to favour comfort over performance, fail to manage axle hop and torque effectively requiring you to ease off in order to gain traction. Designed to significantly reduce this engine movement, Revo engine mounts use Dual Durometer technology to minimise noise, vibration and harshness levels (NVH) while drastically improving traction and acceleration. The engine, transmission and torque mounts have been CAD designed to offer OE quality fitment with the performance benefits and quality of a Revo product. Key Features Dramatically reduce engine movement Improved acceleration and torque Dual Durometer Technology Comes with removal tool for torque mount Engine & Transmission Mount The primary design goal of the engine and transmission mounts was to provide a management system for engine movement during vehicle operation with increased power/torque, in order to retain vehicle acceleration and tyre contact during aggressive driving. The aforementioned solution must also continue to dissipate the NVH naturally created by the drivetrain. To accomplish this, the bushing design of past Revo engine mounts was retained in the MQB engine and transmission mounts, allowing Revo engineers to focus their efforts on bushing stiffness/type to accomplish the task. Torque Mount Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting the mount does not require the sub-frame to be removed, reducing installation time and the need for axle re-alignment. A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. Materials, Manufacturing & Fitment Effective design and fitment plays a principal role in managing engine movement to ensure optimal acceleration and tyre contact with the road while dissipating NVH experienced from the drivetrain. Each component has been designed using CAD technology to ensure precision fitment and is supplied with class 12.9 hardware to replace the standard fixings. To ensure optimum strength and durability, brackets and housings are CNC machined from 6061-billet aluminium and finished with an anodised coating to protect from heat and corrosion. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructionsDownload the Revo MQB Engine Mount Instructions HERE Fitting instructionsDownload the Revo MQB Torque Mount Instructions HERE Fitting instructionsDownload the Revo MQB Transmission Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull kit includes engine mount, transmission mount , torque mount and torque mount installation tool Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards

Read more less

OPEN CONE INTAKE The Revo open cone Air Intake System for the 2.0T Gen3 engine improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo ECU Software. Engineered to directly replace the stock airbox, pipework and filter, this kit comes complete with a silicone hose, aluminium pipe, heat shield, filter, machined turbo coupler and fitting kit. KEY FEATURES Increased Performance (+12BHP +23Nm) Improved Air Flow Efficiency Three Stage Foam Filter with Mesh Direct to turbo fitment OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and silicone hose which joins directly to the turbo. Revo Flush Fit silicone hoses avoid unwanted turbulence at joins, and increase the rate at which air can flow ensuring maximum performance at any level of tuning. SILICONE HOSE The Revo silicone hose as an increased inner diameter that gradually tapers from hard pipe to turbo to optimise airflow. Designed to directly replace the plastic hose and turbo elbow, this upgrade reduces restriction and maximises smooth airflow improving both power and torque throughout the rev range. A machined billet bung is integrated into the hose, connecting the stock PCV system vacuum. TURBO INLET The Revo machined inlet replaces the restrictive elbow found on the IS20/IS38 turbos. The billet aluminium inlet securely fits the OE unit using locking tabs and integrated O-rings. With almost double the cross-sectional area compared to other available products, air can stabilise and distribute before a smooth tapered transition to the turbo. Removing the internal steps between components further ensures uninterrupted airflow and removes any unnecessary turbulence. HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points to provide easy and secure installation. FILTER An intake system is only as good as the filter. This kit comes complete with a custom Revo foam filter, supported by galvanised epoxy-coated mesh for strength under load. Revo three-stage foam filters work very differently to conventional paper or cotton-gauze alternatives designed to trap particles on the outer layer. Revo filters trap debris and particles within the foam layers, allowing air to still navigate through.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled dyno testing.   PERFORMANCE DATA Back-to-back testing of the stock air intake system and the Revo kit were carried out. Fitted to an Audi S3 (310PS Model) with Revo ECU Software, Revo Intercooler, Revo Charge & Throttle Pipes and Revo Downpipe. The results show improvement throughout the whole rev range. The Revo intake offering an average gain of +12WHP, and +18NM torque over the stock part. Increased airflow also delivers impressive peak performance gains of +19.4BHP @6000rpm and +55NM @2400RPM over the stock intake system. AIRFLOW To evaluate the efficiency, the Revo Intake was tested for inlet charge pressure and mass airflow. Boost pressure was measured and an increase in charge pressure was seen across the top end of the RPM range, as detailed in the dyno graph. Intake mass airflow logging showed similar results to the charge pressure, showing considerable increases at the top of the RPM range.     FITTING      Manufacturer Model Engine Year Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V)/td> 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Seat Ibiza Cupra 1.8 TSI 15 - Volkswagen Golf (MK7) 2.0 TSI GTI 14 - Volkswagen Golf (MK7) 2.0 TSI R 14 - Volkswagen Golf (MK7) 1.8 TSI 12 -

Read more less

Beautifully crafted from the highest quality 3K carbon, the Revo Carbon Series is much more than a visual enhancement. Designed to directly replace restrictive OEM components, the Carbon Series has performance woven in to the core of every product.   OVERVIEW The Revo Carbon Series Air Intake system is a direct replacement kit and includes a beautiful carbon front panel, designed to increase the flow of air utilising an internal fin, along with a second feed into the engine bay to help keep ambient temperatures lower. The Revo Panel Filter upgrade replaces the restrictive stock paper filter, and a Revo silicone hose allows air to flow smoothly to the turbo from the airbox, resolving the restrictions found during flow testing of the OEM system to improve your engines response and the power it can create. BENEFITS Improved performance and response Replaces rear pipe with a silicone hose Smooths air flow and reduces restriction Direct replacement carbon fibre kit Proven performance benefits    CARBON AIR SCOOP CARBON AIR SCOOP Manufactured using the highest quality materials, the Revo carbon front section directly replaces the standard plastic part and integrates a direct cold air feed which is blanked off on the standard part to lower engine bay temperatures. A matte carbon finish coupled with impressive performance benefits delivers in form and function, looking great in the engine bay yet still performing above and beyond the OEM part.       REVO PANEL FILTER Revo Panel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance.       SILICONE INTAKE HOSE No detail has been overlooked when reducing restrictions within the stock airflow system. The stock corrugated plastic hose is replaced with a smooth silicone one, reducing air turbulence. A four-ply construction with an internal wire helix increases strength to prevent collapsing under pressure. Internal steps flush fit against the stock air box and the turbo inlet, creating a smooth transition between components ensuring the smoothest airflow.   TESTING PERFORMANCE Testing was carried out with consistent conditions on both the OEM intake and the Revo Carbon Series Air Intake System on a 2014 Skoda Octavia VRS TDI 2.0 184PS running Revo Performance ECU Software. While dyno testing for performance gains, VCDC software was used to log airflow. The Revo Carbon Series Intake increased vehicle performance, especially over 3500rpm, highlighting the performance benefits over the stock components.   AIRFLOW The airflow comparison showed the Revo Carbon Series intake flowing 6 g/s higher at 4500rpm then stock. The stock system had a maximum airflow of 178g/s while the Revo intake allowed an increased flow of 184g/s. This equates to 662kg/h, a 22kg/h improvement over the stock intake system.     FITMENT RV581M200200 - Carbon Intake System - Carbon Front Section, Air Filter and hose Manufacturer Model Engine Year Audi A3 (8v) 2.0 CR Diesel 12 - Audi TT Mk3 2.0 CR Diesel 14 - Seat Leon Mk3 2.0 CR Diesel 12 - Skoda Octavia Mk3 2.0 CR Diesel 12 - Skoda Superb Mk3 2.0 CR Diesel 15 - VW Golf MK7 2.0 CR Diesel & GTD 12 - VW Tiguan 2.0 Diesel 16 -   Images are for illustration purposes only.   Revo Carbon Series air intake systems perform beautifully. Designed to function no matter the power, Carbon Series intakes look great because of their effective design. Click to find out more

Read more less

The Revo Coolant Relocation Hose offers a high-quality single piece replacement for the OEM part which redirects the hose under the front air scoop to give a more aesthetically pleasing look. COOLANT RELOCATION HOSE The Revo Coolant Relocation hose has been designed and manufactured to directly replace the stock hose found in vehicles with the 1.8T and 2.0T TSI EA888 Gen3 engines. The Revo Coolant Relocation Hose offers a high-quality single piece replacement for the OEM part which redirects the hose under the front air scoop to give a more aesthetically pleasing look.  KEY FEATURES Direct Routing Silicone Hose Improve Aesthetics Coolant caps for easy installation     TECHNICAL DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the MQB Coolant relocation hose instructions   VEHICLE APPLICATIONS   Manufacturer Model Engine Year Audi A3 / S3 (8V) 1.8 / 2.0 TFSI 12 - Audi TT / TTS (MK3) 2.0 TFSI 14 - Seat Leon (MK3) 1.8 / 2.0 TSI 15 - Skoda Octavia (Mk3) 1.8 / 2.0 TSI 13 - Skoda Superb 2.0 TSI 15 - VW Golf (Mk7) 1.8 / 2.0 TSI 12 -

Read more less

EVERYTHING YOU NEEDFOR THE POWER YOU CRAVE Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all. Engineered to perform, only Revo offers a complete tuning solution specifically designed for your vehicle. AIR INTAKE SYSTEM PERFORMANCESOFTWARE INTERCOOLER PIPE UPGRADE KIT INTERCOOLER     CARBON SERIESAIR INTAKE SYSTEM Beautifully crafted from the highest quality 3k carbon, the Revo Carbon Series is much more than a visual enhancement. Designed to directly replace restrictive OEM components, the Carbon Series has performance woven into the core of every product. IncreasedDiameter DirectInternals ThermalBarrier Learn more about this product OPEN CONEAIR INTAKE SYSTEM Revo Open Cone Air Intake Systems completely replace the OEM air intake for those who like to announce their vehicle is far from standard. Along with an aggressive intake sound, more air means access to more power throughout the rev-range. IncreasedFlow DirectReplacement IncreasedDiameter Learn more about this product     PERFORMANCE ECU SOFTWARE Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev range while maintaining the extensive factory safety mechanisms. Revo Software offers a perfect balance of performance, economy, longevity, and safety so you can drive harder, for longer. OBDII PortInstalled Vehicle HealthCheck Authorised DealerSet-up Read More TCU SOFTWARE Revo Transmission Control Unit Software allows your automatic gearbox to work in harmony with Revo ECU Software. As well as enhanced driveability and quick shifts, Revo TCU Software is packed full of features. OptimisedShift Points DynamicLaunch Control GlobalDevelopment Programme Read More     INTERCOOLER PIPE UPGRADE KIT The Revo Intercooler Pipe Upgrade kit reduces charge system resistance and improves flow over the restrictive stock pipework. Featuring fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. DirectReplacement IncreasedDiameter DirectInternals Learn more about this product INTERCOOLER UPGRADE The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Unique design features lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software, ensuring you get consistent performance when you need it most. DirectReplacement UniqueFin Design MinimisedPressure Drop Learn more about this product     STOCK POWER300PS TORQUE380NM 0 - 60 MPH4.6S 100 - 200 KPH14.2S POWER400PS TORQUE550NM 0 - 60 MPH3.6S 100 - 200 KPH8.8S Find your nearest Revo Authorised Dealer Manufacturer Model Variant Engine Year Audi S3 8V 2.0 TFSI 2014 - 2019 Audi TTS 8S 2.0 TFSI 2014 > SEAT Leon Cupra 5F 2.0 TSI 2014 - 2019 Skoda Superb 3V 2.0 TSI 2014 - 2019 VW Arteon 3H 2.0 TSI 2017 > VW Golf R Mk7 2.0 TSI 2014 - 2019 VW Golf GTI Clubsort Mk7 2.0 TSI 2016 - 2018 VW Golf GTI Clubsort S Mk7 2.0 TSI 2016 - 2017 Images shown are for illustration purposes only All software and features are ECU/TCU ID dependant. Upgrade pricing is for existing Revo ECU or/and TCU customers.  Terms and Conditions apply.  Exhaust Overrun is an seperate file option that can be choosen at point of software installation. Performance data is taken from 2016 VW Golf R Mk7 with DSG. Aftermarket downpipe required. Pricing does not include the installation of parts, please contact your local Revo Authorised Dealer.

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory air box and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High airflow with three layers of foam Lifetime warranty Lasts up to 60,000 miles before cleaning is required depending on driving conditions Works with original manufacturers air box   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing airflow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full air flow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to original purchaser with proof of purchase)     FITTING        Manufacturer Model Engine Year Audi A3 (8V)  1.8 / 2.0 TFSI  2012 > Audi A3 (8V)  1.6 / 2.0 TDI  2012 > Audi TT (Mk3)  1.8 / 2.0 TFSI  2014 > Audi TT (Mk3)  2.0 TDI  2014 > Seat Leon (Mk3)  1.8 / 2.0 TSI  2012 > Skoda Octavia (MK3)  1.8 / 2.0 TSI  2013 > Skoda Octavia (MK3)  1.6 / 2.0 TDI  2013 > Skoda Superb (Mk3)  1.8 / 2.0 TSI  2015 > Skoda Superb (Mk3)  1.6 / 2.0 TDI  2015 > VW Golf Vll (Mk7)  1.8 / 2.0 TSI / GTI / R  2012 > VW Golf Vll (Mk7)  1.6 / 2.0 TDI / GTD  2012 > VW Golf Vlll (Mk8)  GTI 2.0 TSI  2019 > VW Golf Vlll (Mk8)  2.0 TDI  2019 > VW Passat  1.8 / 2.0 TSI  2014 > VW Passat  1.6 / 2.0 TDI  2014 > VW Polo GTI  2.0 TSI  2018 > VW Tiguan  2.0 TSI  2016 > VW Tiguan  2.0 TDI  2016 > VW Touran  1.8 TSI  2015 > VW Touran  1.6 / 2.0 TDI  2015 >

Read more less

Beautifully crafted from the highest quality 3K carbon, the Revo Carbon Series is much more than a visual enhancement. Designed to directly replace restrictive OEM components, the Carbon Series has performance woven in to the core of every product. REVO CARBON SERIES - AIR INTAKE SYSTEM The Revo Carbon Series Air Intake System for the 2.0 & 1.8TSI offers unparalleled performance benefits along with a striking visual addition to your engine bay. The full kit, which comes complete with a matching Carbon Series front scoop, lid, back-pipe and Pro-Panel filter completely replaces any restrictive elements of the OEM intake system, decreasing turbulence and allowing a larger volume of air to reach the turbo more quickly KEY FEATURES Increased Performance Improves Air Flow Efficiency Carbon Series Quality Replaces Restrictive Stock Turbo Elbow Engineered for both LHD and RHD Fitment 16% Larger Air Box Outlet     FULL KIT INCLUDES 90mm Turbo Inlet Hose Machined Inlet Carbon Air Box Lid ProPanel Air Filter Carbon Front Section Coolant Relocation Hose RESEARCH AND DEVELOPMENT All Revo products are designed in-house, allowing our team of engineers to rigorously test products during the design process. Only Revo offers a kit with a 16% larger lid outlet and matching hose, ensuring maximum performance at even Stage 3 and above specification.   GRAPHS To ensure this product would meet our exacting standards and performance, we carried out controlled testing on a Stage 4 Skoda Octavia VRS 2.0TSI running Shell vPower pump fuel on an in-house Dynapak hub dyno. With impressive results in comparison to the standard set up, peak results showed up to +41 WHP and +42 NM over stock with an average of +19whp and +25NM throughout the rev range.     VEHICLE APPLICATIONS   Manufacturer Model Engine Year Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V)/td> 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Seat Ibiza Cupra 1.8 TSI 15 - Volkswagen Golf (MK7) 2.0 TSI GTI 14 - Volkswagen Golf (MK7) 2.0 TSI R 14 - Volkswagen Golf (MK7) 1.8 TSI 12 - * Fitments for 1.8 TSI & 2.0 TSI Engines with IHI IS20 and IS38 Turbos INDIVIDUAL PRODUCTS Carbon SeriesCarbon Lid & Hose Kit Carbon SeriesCarbon Scoop Carbon Series Secondary Breather Revo Carbon Series air intake systems perform beautifully. Designed to function no matter the power, Carbon Series intakes look great because of their effective design.

Read more less

REVO TCU SOFTWARE Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. STAGE 2 | STOCK IS38 The DQ250 direct-shift is an electronically controlled dual-clutch gearbox that offers much faster gear changes. The dual clutch allows gears to change instantaneously without losing boost. Improved engine performance from Revo ECU Software means that the stock shift points do not give you the maximum potential that your car has to offer. Revo Transmission Control Unit (TCU) Software ensures your gearbox works in harmony with Revo ECU Software to give you access to even more power. Only The Driven know that quicker gear changes and extended rev-ranges mean more exhilarating power, and as with all Revo Software, you won’t have to compromise on day-to-day driveability. DQ250 DSG GEARBOX Revo TCU Software offers improved response and optimised shift points but maintains the characteristics of Drive and Sports mode. Manual mode now gives you more control by disabling the automatic kick down feature, unlike drive mode where if you plant your foot the gears automatically kick down, allowing you to select the gear you want and make the most of the increased torque from Revo ECU software. Automatic upshift is still active all in modes to offer the best performance and safety for your engine, whilst Dynamic Launch Control allows you to launch at various RPM points depending on your throttle position, improving your 0-60mph times. The result of over two years of extensive development through our Global Development Programme. This Software has been tested in countries from South Africa, Brazil and America to Australia, South Korea, Russia and Germany giving us invaluable data from a wide variety of driving styles and conditions. This ensures the unrivalled quality and performance you demand. SOFTWARE FEATURES DYNAMIC LAUNCH CONTROL Variable RPM launch control via throttle position GLOBAL DEVELOPMENT PROGRAM Extensively tested through our development program OBD INSTALL Revo Software can be installed quickly and safely via the OBD Port   DEVELOPMENT Revo started Developing ECU software in 2014 for the GEN3 EA888 engines, and 12 months later started working on the MQB DSG software to match. Our own in-house Audi S3, VW Golf R and Skoda vRS spent countless hours in the hands of the calibration engineers, 2 years later they had combined over 70,000miles of varied driving throughout the UK on road and track. During the early stages of testing it was established that the cars are capable of very quick launch times once tuned, however, it equally became apparent that the ECU torque strategy needed to be carefully calibrated to help each car achieve optimum performance while keeping factory OEM style drivability and mechanical sympathy for the DSG. 2016 saw the start of the Global Beta test program throughout the Revo Authorised dealer network in Russia, South Africa, Brazil, America, Malaysia, Australia, South Korea, Italy, Germany and Spain to name but a few. This ability to get people driving their own cars provided crucial feedback for Revo to begin to get the product to market, safe in the knowledge we have thoroughly tested all aspects of DSG tuning in collaboration with Revo ECU software.   TECHNICAL DATA Revo Transmission Stage 2 Software has been designed to work with Revo Stage 2 ECU Software. Calibrated for 2 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 2500 At 45-60% throttle launch RPM is 3000 At 70% throttle launch RPM is 3250 At 85-100% throttle launch RPM is 3500 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Increased clamping pressure Revo Transmission Stage 2 Software has been designed to work with Revo Stage 2 ECU Software. Calibrated for 4 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 3000 At 45-60% throttle launch RPM is 3500 At 70% throttle launch RPM is 3750 At 85-100% throttle launch RPM is 4000 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Increased clamping pressure

Read more less

Revo Torque MountMore power results in more movement during aggressive acceleration. The stock torque mount is designed to offer comfort over performance and does not manage engine movement effectively. Designed to significantly reduce the loss of torque and drastically improve traction and acceleration, the Revo Torque mount has little to no effect on vibration and harshness levels (NVH) felt in the cabin. Key Features Dramatically reduce drivetrain movement Improved acceleration and torque Simple and easy to install with tool included Doesn't require sub-frame removal for installation Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting Kit A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. This allows the OEM part to be removed and the Revo part to be installed without removing the sub-frame, reducing installation time and the need for axle re-alignment. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructions Download the Revo MQB Torque Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull Mount Kit available, including Engine, Transmission and Torque mount Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Turbo Inlet Hose The Revo Turbo Inlet Hose has been designed and engineered to directly replace the stock pipe and elbow found in vehicles with the 1.8 and 2.0 TSI engines with an IHI turbo. The Revo Turbo Inlet Hose offers a high-quality single piece replacement for the OEM parts which allows for smoother uninterrupted air flow, improving the throttle response and performance of your vehicle. Key Features Increased performance Improves air flow efficiency Constant taper for smoother flow Turbo matched inlets Replaces restrictive stock turbo elbow Engineered for both LHD and RHD fitment OEM Part With ample efficiency for a stock vehicle, the OEM system quickly becomes a choking point for the engine when running Revo Software. With a generously sized air box, the standard plastic intake hose causes the most amount of restriction; convolutions designed to allow for engine movement disrupt airflow, a small internal diameter limits the volume of air and a sharp reduction in hose diameter at the turbo causes turbulence. Turbo Inlet The Revo machined inlet replaces the restrictive elbow found on the IS20/IS38 turbos. The machined billet aluminium inlet securely fits to the OE unit using locking tabs and integrated O-rings. With almost double the cross-sectional area compared to other available products, air can stabilise and distribute before a smooth tapered transition to the turbo. Removing the internal steps between components further ensures uninterrupted airflow and removes any unnecessary turbulence. Silicone Hose Design The Revo Turbo Hose as an increased inner diameter that gradually tapers from air box to turbo to optimise airflow, while maintaining the tolerances required to fit both LHD and RHD vehicles with a standard air box. Designed to directly replace the plastic hose and turbo elbow, this upgrade reduces restriction and maximises smooth airflow improving both power and torque throughout the rev range. A four-ply construction with an internal wire helix increases strength to prevent collapsing under pressure. Internal steps flush fit against the stock air box and the machined inlet, creating a smooth transition between components ensuring the smoothest airflow possible to the turbo. A machined bung is integrated in to the hose, connecting the stock PCV system vacuum. Research and Development All Revo products are designed in-house and are rigorously tested. The Revo Turbo Inlet Hose allows the Stock IS38 turbo to run more efficiently, intake a larger volume of air and minimise turbulence. This increases power and torque, especially at the top end of the rev range as highlighted during controlled Dyno testing. Graphs Data Up to 12WHP and 15NM gains Graphs produced with Revo stage 2 software on Audi S3 8V Stock Runs with complete OEM Air intake setup Revo Runs with Revo Intake Hose and ProPanel Filter Technical Documents The following documents are available to view: Fitting instructions Download the Revo Turbo Inlet Hose Fitting Instructions Vehicle Applications Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V) 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Volkswagen Golf (MK7) R 2.0 TSI 12 - Volkswagen Golf (MK7) GTI 2.0 TSI 12 - Volkswagen Golf (MK7) 1.8 TSI 12 - * Fitments for 1.8 TSI & 2.0 TSI Engines with IHI IS20 and IS38 Turbos © Revo Technik

Read more less

Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. REVO TCU SOFTWARE STAGE 1 | STOCK IS38 The DQ250 direct-shift is an electronically controlled dual-clutch gearbox that offers much faster gear changes. The dual clutch allows gears to change instantaneously without losing boost. Improved engine performance from Revo ECU Software means that the stock shift points do not give you the maximum potential that your car has to offer. Revo Transmission Control Unit (TCU) Software ensures your gearbox works in harmony with Revo ECU Software to give you access to even more power. Only The Driven know that quicker gear changes and extended rev-ranges mean more exhilarating power, and as with all Revo Software, you won’t have to compromise on day-to-day driveability. DQ250 DSG GEARBOX Revo TCU Software offers improved response and optimised shift points but maintains the characteristics of Drive and Sports mode. Manual mode now gives you more control by disabling the automatic kick down feature, unlike drive mode where if you plant your foot the gears automatically kick down, allowing you to select the gear you want and make the most of the increased torque from Revo ECU software. Automatic upshift is still active all in modes to offer the best performance and safety for your engine, whilst Dynamic Launch Control allows you to launch at various RPM points depending on your throttle position, improving your 0-60mph times. The result of over two years of extensive development through our Global Development Programme. This Software has been tested in countries from South Africa, Brazil and America to Australia, South Korea, Russia and Germany giving us invaluable data from a wide variety of driving styles and conditions. This ensures the unrivalled quality and performance you demand. SOFTWARE FEATURES DYNAMIC LAUNCH CONTROL Variable RPM launch control via throttle position GLOBAL DEVELOPMENT PROGRAM Extensively tested through our development program OBD INSTALL Revo Software can be installed quickly and safely via the OBD Port   DEVELOPMENT Revo started Developing ECU software in 2014 for the GEN3 EA888 engines, and 12 months later started working on the MQB DSG software to match. Our own in-house Audi S3, VW Golf R and Skoda vRS spent countless hours in the hands of the calibration engineers, 2 years later they had combined over 70,000miles of varied driving throughout the UK on road and track. During the early stages of testing it was established that the cars are capable of very quick launch times once tuned, however, it equally became apparent that the ECU torque strategy needed to be carefully calibrated to help each car achieve optimum performance while keeping factory OEM style drivability and mechanical sympathy for the DSG. 2016 saw the start of the Global Beta test program throughout the Revo Authorised dealer network in Russia, South Africa, Brazil, America, Malaysia, Australia, South Korea, Italy, Germany and Spain to name but a few. This ability to get people driving their own cars provided crucial feedback for Revo to begin to get the product to market, safe in the knowledge we have thoroughly tested all aspects of DSG tuning in collaboration with Revo ECU software.   TECHNICAL DATA Revo Transmission Stage 1 Software has been designed to work with Revo Stage 1 ECU Software. Calibrated for 2 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 2500 At 45-60% throttle launch RPM is 3000 At 70% throttle launch RPM is 3250 At 85-100% throttle launch RPM is 3500 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Revo Transmission Stage 1 Software has been designed to work with Revo Stage 1 ECU Software. Calibrated for 4 Wheel Drive vehciles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 3000 At 45-60% throttle launch RPM is 3500 At 70% throttle launch RPM is 3750 At 85-100% throttle launch RPM is 4000 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds

Read more less