performance-mqb

seatTurbo Muffler Delete The Revo Turbo Muffler Delete has been designed and manufactured to directly replace the stock muffler found in vehicles with the 1.8T and 2.0T TSI engines with an IHI turbo. The Revo Turbo Muffler Delete offers a high-quality single piece replacement for the OEM part which allows for smoother uninterrupted air flow, increasing throttle response and providing improved turbo acoustics. Key Features CNC machined Single piece design Anodised black Improved boost response Increased turbo sound OEM Part The factory IHI turbocharger on your engine is equipped with a turbo muffler positioned at the compressor outlet. This is designed to reduce noise from the turbocharger by using two holes cut into the side walls that create chambers. These chambers cause turbulence in the air exiting the turbo which produces back pressure that negatively affects performance and response. Design Features Designed by Revo, the turbo muffler delete is CNC machined from a single piece of billet aluminium and anodised black for strength and corrosion resistance with a laser-etched Revo logo. Its single piece design allows air a more direct path when exiting the turbo, smoothing flow to offer enhanced throttle and boost response. This part comes complete with a high-temperature gasket to ensure a secure seal when installed. Vehicle Applications Audi S1 2.0 TFSI 14 - Audi A3 / S3 (8V) 1.8 / 2.0 TFSI 12 - Audi A4 (B8/8.5) 2.0 TFSI 11 - Audi A5 (B8/8.5) 2.0 TFSI 12 - Audi Q5 1.8 / 2.0 TFSI 11 - Audi TT / TTS (MK3) 2.0 TFSI 14 - Seat Ibiza Cupra 1.8 TSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 15 - Skoda Octavia (Mk3) 1.8 / 2.0 TSI 13 - Skoda Superb 2.0 TSI 15 - VW Golf (Mk7) 1.8 / 2.0 TSI 12 - VW Polo GTI (Mk6) 1.8 TSI 15 -

Read more less

OPEN CONE INTAKE The Revo open cone Air Intake System for the 2.0T Gen3 engine improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo ECU Software. Engineered to directly replace the stock airbox, pipework and filter, this kit comes complete with a silicone hose, aluminium pipe, heat shield, filter, machined turbo coupler and fitting kit. KEY FEATURES Increased Performance (+12BHP +23Nm) Improved Air Flow Efficiency Three Stage Foam Filter with Mesh Direct to turbo fitment OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and silicone hose which joins directly to the turbo. Revo Flush Fit silicone hoses avoid unwanted turbulence at joins, and increase the rate at which air can flow ensuring maximum performance at any level of tuning. SILICONE HOSE The Revo silicone hose as an increased inner diameter that gradually tapers from hard pipe to turbo to optimise airflow. Designed to directly replace the plastic hose and turbo elbow, this upgrade reduces restriction and maximises smooth airflow improving both power and torque throughout the rev range. A machined billet bung is integrated into the hose, connecting the stock PCV system vacuum. TURBO INLET The Revo machined inlet replaces the restrictive elbow found on the IS20/IS38 turbos. The billet aluminium inlet securely fits the OE unit using locking tabs and integrated O-rings. With almost double the cross-sectional area compared to other available products, air can stabilise and distribute before a smooth tapered transition to the turbo. Removing the internal steps between components further ensures uninterrupted airflow and removes any unnecessary turbulence. HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points to provide easy and secure installation. FILTER An intake system is only as good as the filter. This kit comes complete with a custom Revo foam filter, supported by galvanised epoxy-coated mesh for strength under load. Revo three-stage foam filters work very differently to conventional paper or cotton-gauze alternatives designed to trap particles on the outer layer. Revo filters trap debris and particles within the foam layers, allowing air to still navigate through.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled dyno testing.   PERFORMANCE DATA Back-to-back testing of the stock air intake system and the Revo kit were carried out. Fitted to an Audi S3 (310PS Model) with Revo ECU Software, Revo Intercooler, Revo Charge & Throttle Pipes and Revo Downpipe. The results show improvement throughout the whole rev range. The Revo intake offering an average gain of +12WHP, and +18NM torque over the stock part. Increased airflow also delivers impressive peak performance gains of +19.4BHP @6000rpm and +55NM @2400RPM over the stock intake system. AIRFLOW To evaluate the efficiency, the Revo Intake was tested for inlet charge pressure and mass airflow. Boost pressure was measured and an increase in charge pressure was seen across the top end of the RPM range, as detailed in the dyno graph. Intake mass airflow logging showed similar results to the charge pressure, showing considerable increases at the top of the RPM range.     FITTING      Manufacturer Model Engine Year Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V)/td> 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Seat Ibiza Cupra 1.8 TSI 15 - Volkswagen Golf (MK7) 2.0 TSI GTI 14 - Volkswagen Golf (MK7) 2.0 TSI R 14 - Volkswagen Golf (MK7) 1.8 TSI 12 -

Read more less

Revo Engine Mounts More power results in more movement during aggressive acceleration. The stock engine mounts, designed to favour comfort over performance, fail to manage axle hop and torque effectively requiring you to ease off in order to gain traction. Designed to significantly reduce this engine movement, Revo engine mounts use Dual Durometer technology to minimise noise, vibration and harshness levels (NVH) while drastically improving traction and acceleration. The engine, transmission and torque mounts have been CAD designed to offer OE quality fitment with the performance benefits and quality of a Revo product. Key Features Dramatically reduce engine movement Improved acceleration and torque Dual Durometer Technology Comes with removal tool for torque mount Engine & Transmission Mount The primary design goal of the engine and transmission mounts was to provide a management system for engine movement during vehicle operation with increased power/torque, in order to retain vehicle acceleration and tyre contact during aggressive driving. The aforementioned solution must also continue to dissipate the NVH naturally created by the drivetrain. To accomplish this, the bushing design of past Revo engine mounts was retained in the MQB engine and transmission mounts, allowing Revo engineers to focus their efforts on bushing stiffness/type to accomplish the task. Torque Mount Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting the mount does not require the sub-frame to be removed, reducing installation time and the need for axle re-alignment. A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. Materials, Manufacturing & Fitment Effective design and fitment plays a principal role in managing engine movement to ensure optimal acceleration and tyre contact with the road while dissipating NVH experienced from the drivetrain. Each component has been designed using CAD technology to ensure precision fitment and is supplied with class 12.9 hardware to replace the standard fixings. To ensure optimum strength and durability, brackets and housings are CNC machined from 6061-billet aluminium and finished with an anodised coating to protect from heat and corrosion. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructionsDownload the Revo MQB Engine Mount Instructions HERE Fitting instructionsDownload the Revo MQB Torque Mount Instructions HERE Fitting instructionsDownload the Revo MQB Transmission Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull kit includes engine mount, transmission mount , torque mount and torque mount installation tool Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards

Read more less

Revo Torque MountMore power results in more movement during aggressive acceleration. The stock torque mount is designed to offer comfort over performance and does not manage engine movement effectively. Designed to significantly reduce the loss of torque and drastically improve traction and acceleration, the Revo Torque mount has little to no effect on vibration and harshness levels (NVH) felt in the cabin. Key Features Dramatically reduce drivetrain movement Improved acceleration and torque Simple and easy to install with tool included Doesn't require sub-frame removal for installation Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting Kit A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. This allows the OEM part to be removed and the Revo part to be installed without removing the sub-frame, reducing installation time and the need for axle re-alignment. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructions Download the Revo MQB Torque Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull Mount Kit available, including Engine, Transmission and Torque mount Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Turbo Inlet Hose The Revo Turbo Inlet Hose has been designed and engineered to directly replace the stock pipe and elbow found in vehicles with the 1.8 and 2.0 TSI engines with an IHI turbo. The Revo Turbo Inlet Hose offers a high-quality single piece replacement for the OEM parts which allows for smoother uninterrupted air flow, improving the throttle response and performance of your vehicle. Key Features Increased performance Improves air flow efficiency Constant taper for smoother flow Turbo matched inlets Replaces restrictive stock turbo elbow Engineered for both LHD and RHD fitment OEM Part With ample efficiency for a stock vehicle, the OEM system quickly becomes a choking point for the engine when running Revo Software. With a generously sized air box, the standard plastic intake hose causes the most amount of restriction; convolutions designed to allow for engine movement disrupt airflow, a small internal diameter limits the volume of air and a sharp reduction in hose diameter at the turbo causes turbulence. Turbo Inlet The Revo machined inlet replaces the restrictive elbow found on the IS20/IS38 turbos. The machined billet aluminium inlet securely fits to the OE unit using locking tabs and integrated O-rings. With almost double the cross-sectional area compared to other available products, air can stabilise and distribute before a smooth tapered transition to the turbo. Removing the internal steps between components further ensures uninterrupted airflow and removes any unnecessary turbulence. Silicone Hose Design The Revo Turbo Hose as an increased inner diameter that gradually tapers from air box to turbo to optimise airflow, while maintaining the tolerances required to fit both LHD and RHD vehicles with a standard air box. Designed to directly replace the plastic hose and turbo elbow, this upgrade reduces restriction and maximises smooth airflow improving both power and torque throughout the rev range. A four-ply construction with an internal wire helix increases strength to prevent collapsing under pressure. Internal steps flush fit against the stock air box and the machined inlet, creating a smooth transition between components ensuring the smoothest airflow possible to the turbo. A machined bung is integrated in to the hose, connecting the stock PCV system vacuum. Research and Development All Revo products are designed in-house and are rigorously tested. The Revo Turbo Inlet Hose allows the Stock IS38 turbo to run more efficiently, intake a larger volume of air and minimise turbulence. This increases power and torque, especially at the top end of the rev range as highlighted during controlled Dyno testing. Graphs Data Up to 12WHP and 15NM gains Graphs produced with Revo stage 2 software on Audi S3 8V Stock Runs with complete OEM Air intake setup Revo Runs with Revo Intake Hose and ProPanel Filter Technical Documents The following documents are available to view: Fitting instructions Download the Revo Turbo Inlet Hose Fitting Instructions Vehicle Applications Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V) 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Volkswagen Golf (MK7) R 2.0 TSI 12 - Volkswagen Golf (MK7) GTI 2.0 TSI 12 - Volkswagen Golf (MK7) 1.8 TSI 12 - * Fitments for 1.8 TSI & 2.0 TSI Engines with IHI IS20 and IS38 Turbos © Revo Technik

Read more less