Performance - Polo MK5

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo BlueGT 1.4 TSI cat back performance exhaust is made in 2.5in (63.5mm) pipework and fits from the catalyst backwards (Cat-back system). This exhausts replaces the centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This part is also available as a non-resonated version which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release The latest vehicle to pass through the Cobra Sport exhaust development process is the VW Polo BlueGT 1.4 TSI. Having previously achieved impressive results from the 1.4 and 1.8 Polo GTI, we were keen to get the sporty 1.4 BlueGT model in for development to expand our Polo range. The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 41% over the OEM system with the resonated 2.5in (63.5mm) bore cat back system weighing in at only 9.52kg compared to the original 16.20kg. The new systems benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says "The new Cobra Sport systems greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The non resonated cat back system offers the biggest sound upgrade offering an increase of 7db over the standard system in the 3,800 rpm static test. We also offer a resonated cat back exhaust upgrade which has been designed to provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivability" The styling of the system is finished off with a choice of twin 3in/76.2mm and 3.25in/82.55mm tailpipes in a highly polished T304 stainless steel finish. These options include a less obtrusive oval slash cut version which further compliments the BlueGT aesthetics.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI 1.8 TSI cat back performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back system) these exhausts replace the front box, centre and rear sections. The resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This part is also available as a non-resonated version which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release The latest vehicle to pass through the Cobra Sport exhaust development process is the MK6 VW Polo GTI 1.8 TSI. Having previously achieved impressive results from the previous 1.4 Polo GTI we were keen to get the new 1.8 litre model in for development to create a new range of Cobra Sport performance exhausts. The larger 1.8 litre engine in the new Polo GTI produces 190bhp as standard matched with an impressive 236 lb-ft of torque giving the lightweight Polo impressive performance figures on paper whilst creating an exhilarating drive. The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 41% over the OEM system with the resonated 2.5"å� cat back system weighing in at only 9.52kg compared to the original 16.20kg. The de-cat and sports cat front pipes have been enlarged to 3̢‰âÂå� bore and offer a weight saving of 0.60kg. The new systems benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says "The new MK6 Polo has been a big hit with initial owners and journalists who rate the 1.8 TSI litre engine as a big improvement over the previous 1.4 TSI. We are very excited to have developed a full range of exhaust systems to offer an upgrade to suit the wide range of buyer requirements. "The new Cobra Sport systems greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The resonated cat back system offers the subtlest upgrade offering an increase of 10db over the standard system in the 4,000 rpm static test. The resonated cat back exhaust upgrade is designed to provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivabilityå�." The styling of the system is finished off with a choice of twin 3̢‰âÂå� and 3.25̢‰âÂå� tailpipes in a highly polished T304 stainless steel finish. These options include a less obtrusive oval slash cut version which further compliments the VW Polo GTI aesthetics.åÊ Media Example of VW Polo GTI 1.8 sports exhaust (cat back - non-resonated). Interior exhaust example of VW Polo GTI 1.8 sports exhaust (cat back - non resonated). Example of VW Polo GTI 1.8 sports exhaust (cat back - non resonated) Example of VW Polo GTI 1.8 sports exhaust (cat back - non resonated) Cobra Sport Exhausts VW promotional video. British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology. åÊ åÊ

Read more less

Scorpion Exhausts - MK6 Polo 1.8TSI Cat Back Exhaust - None Resonated Supplied with Twin 89mm Daytona Tips Contents: Centre Section Rear Link Pipe Rear Silencer Twin Tips (Polished or Black) Fitting Kit# Good to know: Fitment Years: 2015 - 2017 Model: 6C Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75" From their beginnings in the 1930’s and now part of the VAG group Volkswagen have grown to be one of the world’s largest car manufacturers. Initially focusing on affordable family cars including the iconic Beetle all that changed in 1976 with the launch of the Golf/Rabbit Mk1 Gti one of the first hot hatches and a real game changer. Following on from the Gti’s immense success the early 2000’s saw the launch of the first of their high-performance R models the Golf 4 R32. It was only natural that one of the very first performance exhausts Scorpion produced was for the Gti back in the early nineties and they’ve continued to be one of our most popular models to date. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SVWS051 Product Type Cat-Back Resonated Non-resonated Fitment Years 2015 - 2017 Fits To OEM / Scorpion Model Fitment 6C Pipe Diameter 70mm/2.75" * Tailpipe Daytona (twin) Tailpipe Diameter 90mm Shipping Dimensions 102cm x 64cm x 37cm OEM Scorpion Change Weight Difference 16.44 KG 9 KG -7.44 KG

Read more less

Scorpion Exhausts - Polo MK6 1.8TSI - High flow downpipe with De-Cat Replaces OEM Catalyst with a decat pipe Contents: Decat downpipe Front Pipe Fitting Kit Good to know: Fitment Years: 2015 - 2017 Model: 6c Fits To: OEM / Scorpion Pipe Diameter: 76mm/3" From their beginnings in the 1930’s and now part of the VAG group Volkswagen have grown to be one of the world’s largest car manufacturers. Initially focusing on affordable family cars including the iconic Beetle all that changed in 1976 with the launch of the Golf/Rabbit Mk1 Gti one of the first hot hatches and a real game changer. Following on from the Gti’s immense success the early 2000’s saw the launch of the first of their high-performance R models the Golf 4 R32. It was only natural that one of the very first performance exhausts Scorpion produced was for the Gti back in the early nineties and they’ve continued to be one of our most popular models to date. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SVWC051 Product Type Sports/De-cat Fitment Years 2015 - 2017 Fits To OEM / Scorpion Model Fitment 6c Pipe Diameter 76mm/3" * Shipping Dimensions 73cm x 32cm x 32cm Notes Engine management light may be activated, Stage 2 ECU remap recommended Closed Circuit Product Yes OEM Scorpion Change Weight Difference 4.9 KG 4.1 KG -0.8 KG

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI 1.8 TSI performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the first box section and replaces the front pipe. The sports cat exhaust will enable you to pass a UK MOT emissions test or police road side checks. The de-cat sports exhaust version is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks.åÊ All relevant fittings and gaskets are supplied. (Except turbo gasket).

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back system) these exhausts replace the front box, centre and rear sections. This non-resonated sports exhaust makes the system louder as it excludes the centre silencer and therefore, has a sportier exhaust note. This exhaust is also available as a resonated version (including centre silencer) which is a quieter option. Please Note - This package includes a "Race Pipe" which removes the first standard box. All relevant fittings and gaskets are supplied. (Except turbo gasket).   COBRA SPORT PRODUCT REVIEW Cobra Sport’s experienced engineers were able to design an exhaust upgrade which balanced the need for improved gas flow without sacrificing back pressure. The results speak for themselves and certainly boost the car’s credentials. Our fully tuned version was given an inter cooler, induction kit and re-map, together with a Cobra Sport Turbo Back non-resonated exhaust upgrade with high-flow catalyst. On testing the Polo achieved a 50.3bhp increase in power taking it to 227.3bhp from its original 177bhp starting point. Similar increases were achieved with torque, which increased from 184lb-ft to a whopping 227.5lb-ft. Mass was reduced considerably providing a weight saving of almost 37% in comparison to its OE counterpart. All in all these are certainly impressive results for this little car. Styling options consist of standout twin 3” tailpipes in various designs, including the less obtrusive slash cut versions which compliments the VW aesthetics nicely. The exhaust upgrade provides a purposeful but unobtrusive sound quality which in no way interferes with day-to-day driveability. Engineering perfection is a given with all Cobra Sport exhausts, mandrel bends ensure an even curvature throughout and hand finishing of each individual system using advanced stainless steel TIG welding techniques providing assured quality in every exhaust.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Polo GTI 1.8 TSI cat back performance exhaust is made in 2.5" / 63.5mm pipework and fits from the front pipe / catalyst backwards (Cat-back system) these exhausts replace the front box, centre and rear sections. This resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This part is also available as a non-resonated version (excluding the centre silencer) which is a louder option. All relevant fittings and gaskets are supplied.   COBRA SPORT PRODUCT REVIEW   The latest vehicle to pass through the Cobra Sport exhaust development process is the MK6 VW Polo GTI 1.8 TSI. Having previously achieved impressive results from the previous 1.4 Polo GTI we were keen to get the new 1.8 litre model in for development to create a new range of Cobra Sport performance exhausts. The larger 1.8 litre engine in the new Polo GTI produces 190bhp as standard matched with an impressive 236 lb-ft of torque giving the lightweight Polo impressive performance figures on paper whilst creating an exhilarating drive. The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 41% over the OEM system with the resonated 2.5” cat back system weighing in at only 9.52kg compared to the original 16.20kg. The de-cat and sports cat front pipes have been enlarged to 3” bore and offer a weight saving of 0.60kg. The new systems benefit from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can therefore be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says “The new MK6 Polo has been a big hit with initial owners and journalists who rate the 1.8 TSI litre engine as a big improvement over the previous 1.4 TSI. We are very excited to have developed a full range of exhaust systems to offer an upgrade to suit the wide range of buyer requirements. The new Cobra Sport systems greatly improve the exhaust pitch and tone and add the sporty edge which was missing from the factory system. The resonated cat back system offers the subtlest upgrade offering an increase of 10db over the standard system in the 4,000 rpm static test. The resonated cat back exhaust upgrade is designed to provide a purposeful but unobtrusive pitch perfect sound quality which in no way interferes with day-to-day drivability”. The styling of the system is finished off with a choice of twin 3” and 3.25” tailpipes in a highly polished T304 stainless steel finish. These options include a less obtrusive oval slash cut version which further compliments the VW Polo GTI aesthetics.

Read more less

Non Resonated Twin Polished Tips Part No. Description Tailpipe Pipe Diameter Race EC MSSE134 Centre Silencer Replacement Pipe 2.76" (70.00mm) MSVW458 Rear Silencer Assembly MSVW369 Tip Assembly Twin 80mm GT80 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Large-bore Downpipe and De-cat-Requires a Stage 2 ECU Remap for cat back fitment Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXVW452 Large-bore Downpipe and De-cat-Requires a Stage 2 ECU Remap for fitment to Cat Back System 70 2.76 Yes No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Scorpion Exhausts - MK6 Polo 1.4TSI - Downpipe with Decat Replaces OEM Catalyst with Decat Downpipe - for off road use! Contents: Downpipe with Decat Front section (Resonated or none) Fitting Kit Good to know: Fitment Years: 2010 - 2015 Model: 1.4 Tsi  Fits To: OEM / Scorpion Pipe Diameter: 70mm/2.75" From their beginnings in the 1930’s and now part of the VAG group Volkswagen have grown to be one of the world’s largest car manufacturers. Initially focusing on affordable family cars including the iconic Beetle all that changed in 1976 with the launch of the Golf/Rabbit Mk1 Gti one of the first hot hatches and a real game changer. Following on from the Gti’s immense success the early 2000’s saw the launch of the first of their high-performance R models the Golf 4 R32. It was only natural that one of the very first performance exhausts Scorpion produced was for the Gti back in the early nineties and they’ve continued to be one of our most popular models to date.    TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SVWCS045 Product Type Turbo-Downpipe Resonated Non-resonated Fitment Years 2010 - 2015 Fits To OEM / Scorpion Model Fitment 1.4 Tsi Pipe Diameter 70mm/2.75" * Shipping Dimensions 90cm x 78cm x 26cm Notes Engine management light may be activated, Stage 2 ECU remap recommended Closed Circuit Product Yes

Read more less

Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap Part No. Description Tailpipe Pipe Diameter Race EC MSSE132REP Large-bore Downpipe and Decat 2.76" (70.00mm) Yes MSSE133 Flex Connecting Pipe Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less