Revo Hardware

REVO ENGINE MOUNTS FORD FIESTA MK8 REAR TORQUE MOUNT OEM engine mounts are designed with very low NVH (Noise, Vibration and Harshness) in mind. While this offers the smooth ride that most drivers desire, it becomes a very limiting factor for those who prefer performance and response. The Revo rear torque mount is designed to eliminate excessive movement, allowing you to reach your true performance potential and get the power down when you need it. Manufactured from only the best materials, our design team worked closely with industry leaders Powerflex to ensure a product that will perform when you need it most. Polyurethane bushes can perform under the most extreme of conditions, ensuring strength and stability under tremendous pressures. Tuned specifically for energy transfer they offer smoother shifts and limited wheel hop, providing you with a better driving experience and increasing the opportunity to use the power your car has to offer. KEY FEATURES Dramatically reduce engine movement Smoother gear changes CAD designed for precise fitment Custom designed Powerflex bushings Full CNC machined body and locating pins   HOUSING Precision CNC machined from aircraft-grade 6061 T6 aluminium, the main housing is extremely strong yet lightweight and offers a solid base to perfectly house each polyurethane bush. Finished with an engraved Revo logo and red Powerflex bushes PINS Both pins have been specially machined to safely house the bolts to ensure precise fitment and stop any damage to the polyurethane bushings. The large bush pin is CNC machined from a single billet piece of aluminium and reduces the risk of failure from running multiple parts. The small pin is made from stainless steel to offer greater strength and increase product life.   POLYURETHANE BUSHES BY POWERFLEX Powerflex utilises a unique formula of polyurethane, custom-designed to ensure optimum fitment in the machined housings. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Using two different custom durometer bushings gives the ultimate balance of performance and comfort.   LARGE BUSHING WASHER Designed to sit the opposite side of the large pin and made from 3mm stainless steel, we have added this washer to reduce the lateral movement of the mount. By limiting the lateral movement it reduces excessive force placed on the bushes and allows for a more secure fixing of the mount between the OE plates.   FITMENT DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford Fiesta Rear Engine Mount Instructions NOTES Simple replacement of the OEM part Failures have been reported with the stock mounts V2 Design. A washer has been added to limit lateral movement.   VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Fiesta MK8 1.5 ST 2017 onwards Ford Fiesta MK8 1.0 EcoBoost 2017 onwards * For vehicles with manual gearboxes only Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Revo Engine Mounts Ford Fiesta MK7 Rear Torque Mount OEM engine mounts are designed with very low NVH (Noise, Vibration and Harshness) in mind. While this offers the smooth ride that most drivers desire, it becomes a very limiting factor for those who prefer performance and response. The Revo rear torque mount is designed to eliminate excessive movement, allowing you to reach your true performance potential and get power down when you need it. Manufactured from only the best materials, our design team worked closely with industry leaders Powerflex to ensure a product that will perform when you need it most. Polyurethane bushes can perform under the most extreme of conditions, ensuring strength and stability under tremendous pressures. Tuned specifically for energy transfer they offer smoother shifts and limited wheel hop, providing you with a better driving experience and increasing the opportunity to use the power your car has to offer. Key Features Dramatically reduce engine movement Smoother gear changes CAD designed for precise fitment Custom designed Powerflex bushings Full CNC machined body and locating pins Design Designed by our engineering team using the latest CAD software, the Revo Fiesta rear torque mount directly replaces the OEM mount. 3D printing technology allows rapid prototyping for fitment testing, allowing the team to make the smallest of modifications to offer you the perfect product. Material Precision CNC machined from aircraft grade 6061 T6 aluminium, the main housing and pin are extremely strong yet lightweight. and are recessed to perfectly seat each polyurethane bush. Finished with an engraved Revo logo red Powerflex bushes and powder coated in black for durability and longevity. Strength Designed specifically for strength, the pins also shield the bushings from the bolt to avoid damaging them during installation. Unlike other aftermarket mounts, the fixing pin has been made using a single machined piece to ensure strength and fitment tolerances are met. Bushes Powerflex utilise a unique formula of polyurethane, custom designed to ensure optimum fitment in the machined housings. After testing of various amounts of compliance, our engineers were able to fine tune the final bush to achieve a balance between performance and comfort. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Our specified durometers provide a stiffer mount to limit the engine movement without compromising on NVH (Noise Vibration Harshness) levels in the process. Technical Documents Fitting Instructions can be found Here Vehicle Applications Ford Fiesta MK7 1.6 ST 2013 onwards Ford Fiesta MK7 1.0 EcoBoost 2012 onwards Ford Fiesta MK6 2.0 2005 - 2011 Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Ford Focus Rear Torque Mount OEM engine mounts are designed with very low NVH (Noise, Vibration and Harshness) in mind. While this offers the smooth ride that most drivers desire, it becomes a very limiting factor for those who prefer performance and response. The Revo rear torque mount is designed to eliminate excessive movement, allowing you to reach your true performance potential and get the power down when you need it. Manufactured from only the best materials, our design team worked closely with industry leaders Powerflex to ensure a product that will perform when you need it most. Polyurethane bushes can perform under the most extreme of conditions, ensuring strength and stability under tremendous pressures. Tuned specifically for energy transfer they offer smoother shifts and limited wheel hop, providing you with a better driving experience and increasing the opportunity to use the power your car has to offer. Material Precision CNC machined from aircraft grade 6061 T6 aluminium, the main housing is extremely strong yet lightweight and is recessed to perfectly seat the polyurethane bush. Finished with an engraved Revo logo red Powerflex bushes and powder coated in black for durability and longevity. The machined insert is encapsulated in polyurethane during the moulding process to ensure a stronger fixing point. Precision Design Designed by our engineering team using the latest CAD software, the Revo Focus rear torque mount directly replaces the OEM mount. 3D printing technology allows rapid prototyping for fitment testing, allowing the team to make the smallest of modifications to offer you the perfect product.   Polyurethane Bushes by Powerflex Powerflex utilise a unique formula of polyurethane, custom designed to ensure optimum fitment in the machined housings. After testing of various amounts of compliance, our engineers were able to fine tune the final bush to achieve a balance between performance and comfort. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Our specified durometers provide a stiffer mount to limit the engine movement without compromising on NVH (Noise Vibration Harshness) levels in the process. Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Revo Engine Mounts More power results in more movement during aggressive acceleration. The stock engine mounts, designed to favour comfort over performance, fail to manage axle hop and torque effectively requiring you to ease off in order to gain traction. Designed to significantly reduce this engine movement, Revo engine mounts use Dual Durometer technology to minimise noise, vibration and harshness levels (NVH) while drastically improving traction and acceleration. The engine, transmission and torque mounts have been CAD designed to offer OE quality fitment with the performance benefits and quality of a Revo product. Key Features Dramatically reduce engine movement Improved acceleration and torque Dual Durometer Technology Comes with removal tool for torque mount Engine & Transmission Mount The primary design goal of the engine and transmission mounts was to provide a management system for engine movement during vehicle operation with increased power/torque, in order to retain vehicle acceleration and tyre contact during aggressive driving. The aforementioned solution must also continue to dissipate the NVH naturally created by the drivetrain. To accomplish this, the bushing design of past Revo engine mounts was retained in the MQB engine and transmission mounts, allowing Revo engineers to focus their efforts on bushing stiffness/type to accomplish the task. Torque Mount Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting the mount does not require the sub-frame to be removed, reducing installation time and the need for axle re-alignment. A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. Materials, Manufacturing & Fitment Effective design and fitment plays a principal role in managing engine movement to ensure optimal acceleration and tyre contact with the road while dissipating NVH experienced from the drivetrain. Each component has been designed using CAD technology to ensure precision fitment and is supplied with class 12.9 hardware to replace the standard fixings. To ensure optimum strength and durability, brackets and housings are CNC machined from 6061-billet aluminium and finished with an anodised coating to protect from heat and corrosion. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructionsDownload the Revo MQB Engine Mount Instructions HERE Fitting instructionsDownload the Revo MQB Torque Mount Instructions HERE Fitting instructionsDownload the Revo MQB Transmission Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull kit includes engine mount, transmission mount , torque mount and torque mount installation tool Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards

Read more less

REVO ENGINE MOUNTS FORD Puma MK2 REAR TORQUE MOUNT OEM engine mounts are designed with very low NVH (Noise, Vibration and Harshness) in mind. While this offers the smooth ride that most drivers desire, it becomes a very limiting factor for those who prefer performance and response. The Revo rear torque mount is designed to eliminate excessive movement, allowing you to reach your true performance potential and get the power down when you need it. Manufactured from only the best materials, our design team worked closely with industry leaders Powerflex to ensure a product that will perform when you need it most. Polyurethane bushes can perform under the most extreme of conditions, ensuring strength and stability under tremendous pressures. Tuned specifically for energy transfer they offer smoother shifts and limited wheel hop, providing you with a better driving experience and increasing the opportunity to use the power your car has to offer. KEY FEATURES Dramatically reduce engine movement Smoother gear changes CAD designed for precise fitment Custom designed Powerflex bushings Full CNC machined body and locating pins   HOUSING Precision CNC machined from aircraft-grade 6061 T6 aluminium, the main housing is extremely strong yet lightweight and offers a solid base to perfectly house each polyurethane bush. Finished with an engraved Revo logo and red Powerflex bushes PINS Both pins have been specially machined to safely house the bolts to ensure precise fitment and stop any damage to the polyurethane bushings. The large bush pin is CNC machined from a single billet piece of aluminium and reduces the risk of failure from running multiple parts. The small pin is made from stainless steel to offer greater strength and increase product life.   POLYURETHANE BUSHES BY POWERFLEX Powerflex utilises a unique formula of polyurethane, custom-designed to ensure optimum fitment in the machined housings. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Using two different custom durometer bushings gives the ultimate balance of performance and comfort.   LARGE BUSHING WASHER Designed to sit the opposite side of the large pin and made from 3mm stainless steel, we have added this washer to reduce the lateral movement of the mount. By limiting the lateral movement it reduces excessive force placed on the bushes and allows for a more secure fixing of the mount between the OE plates.   FITMENT DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford puma Rear Engine Mount Instructions NOTES Simple replacement of the OEM part Failures have been reported with the stock mounts V2 Design. A washer has been added to limit lateral movement.   VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Puma MK2 1.5 ST 2017 onwards Ford Fiesta MK8 1.0 EcoBoost 2017 onwards * For vehicles with manual gearboxes only

Read more less

Revo Torque MountMore power results in more movement during aggressive acceleration. The stock torque mount is designed to offer comfort over performance and does not manage engine movement effectively. Designed to significantly reduce the loss of torque and drastically improve traction and acceleration, the Revo Torque mount has little to no effect on vibration and harshness levels (NVH) felt in the cabin. Key Features Dramatically reduce drivetrain movement Improved acceleration and torque Simple and easy to install with tool included Doesn't require sub-frame removal for installation Arguably the most vital engine mount upgrade to consider, testing highlighted that the engines stock lower torque mount allowed a substantial amount of engine movement to occur. Although some improvements were noted during testing of an insert style upgrade designed to stiffen the standard mount, there was a significant increase in NVH felt in the cabin. This was dramatically reduced when completely replaced with the Revo polyurethane torque mount and also improved acceleration. Fitting Kit A Revo installation tool is included to make removal of the OEM mount and installation of the replacement as quick and easy as possible. This allows the OEM part to be removed and the Revo part to be installed without removing the sub-frame, reducing installation time and the need for axle re-alignment. OEM Comfort, Aftermarket Performance To achieve the optimal balance between performance and comfort, several different durometer bushings were tested on a Volkswagen Golf Mk7 GTI. Bushings were systematically tested at precise increments at each mount location. A 3-axis accelerometer was used to quantify the NVH levels being transmitted into the cabin, as well as the acceleration of the drivetrain during loading. Accelerometer data gave us a way to compare mount combinations against each other with a low data error percentage and to quantify driver comfort as well as engine movement. Supplemental data was taken from VCDS to ensure each individual test was standardised over a given throttle, RPM and speed range. The graph shows the amount of vibration measured whilst driving through the gears. Technical Documents The following documents are available to view: Fitting instructions Download the Revo MQB Torque Mount Instructions HERE Fitment Notes Lower torque mount kit includes torque mount and Installation toolFull Mount Kit available, including Engine, Transmission and Torque mount Vehicle Applications Audi A3 8V 2.0 TSI 2012 onwards Audi S3 8V 2.0 TSI 2012 onwards Audi TT MK3 2.0 TSI 2014 onwards Audi TTS MK3 2.0 TSI 2014 onwards Seat Leon MK3 2.0 TSI 2012 onwards Skoda Octavia 2.0 TSI 2013 onwards VW Golf GTi 2.0 TSI 2012 onwards VW Golf R 2.0 TSI 2012 onwards Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

REVO ENGINE MOUNTS FORD FIESTA MK8.5 REAR TORQUE MOUNT OEM engine mounts are designed with very low NVH (Noise, Vibration and Harshness) in mind. While this offers the smooth ride that most drivers desire, it becomes a very limiting factor for those who prefer performance and response. The Revo rear torque mount is designed to eliminate excessive movement, allowing you to reach your true performance potential and get the power down when you need it. Manufactured from only the best materials, our design team worked closely with industry leaders Powerflex to ensure a product that will perform when you need it most. Polyurethane bushes can perform under the most extreme of conditions, ensuring strength and stability under tremendous pressures. Tuned specifically for energy transfer they offer smoother shifts and limited wheel hop, providing you with a better driving experience and increasing the opportunity to use the power your car has to offer. KEY FEATURES Dramatically reduce engine movement Smoother gear changes CAD designed for precise fitment Custom designed Powerflex bushings Full CNC machined body and locating pins   HOUSING Precision CNC machined from aircraft-grade 6061 T6 aluminium, the main housing is extremely strong yet lightweight and offers a solid base to perfectly house each polyurethane bush. Finished with an engraved Revo logo and red Powerflex bushes PINS Both pins have been specially machined to safely house the bolts to ensure precise fitment and stop any damage to the polyurethane bushings. The large bush pin is CNC machined from a single billet piece of aluminium and reduces the risk of failure from running multiple parts. The small pin is made from stainless steel to offer greater strength and increase product life.   POLYURETHANE BUSHES BY POWERFLEX Powerflex utilises a unique formula of polyurethane, custom-designed to ensure optimum fitment in the machined housings. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Using two different custom durometer bushings gives the ultimate balance of performance and comfort.   LARGE BUSHING WASHER Designed to sit the opposite side of the large pin and made from 3mm stainless steel, we have added this washer to reduce the lateral movement of the mount. By limiting the lateral movement it reduces excessive force placed on the bushes and allows for a more secure fixing of the mount between the OE plates.   FITMENT DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford FIESTA Rear Engine Mount Instructions NOTES Simple replacement of the OEM part Failures have been reported with the stock mounts V2 Design. A washer has been added to limit lateral movement.   VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Puma MK2 1.5 ST 2017 onwards Ford Fiesta MK8.5 1.0 EcoBoost & ST 2021 onwards * For vehicles with manual gearboxes only

Read more less